#8 Square Drive Screws

  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
  1. #8 Square Drive Lube Finished Screws-Number 8 Screws

    #8 Square Drive Lube Finished Screws-Number 8 Screws

    …finish reduces friction for easier installation and protects the screws from surface rust. Square Drive allows freedom from slippage and marring. Requires #2 Square Driver. Sharp thread angle cuts into wood to prevent splitting. Screws resists pullout with threads that cut nearly perpendicular.…

    18 Review(s)
    From: $3.99
  2. Square-X Drive Lube Finished Screws-Number 8

    Square-X Drive Lube Finished Screws-Number 8

    …reduces friction for easier installation and protects the screws from surface rust. Square-X drive combines a square recess for non-slip fastening and Phillips for convenience. Sharp thread angle cuts into wood to prevent splitting. Screws resists pullout with threads that cut nearly perpendicular.…

    25 Review(s)
    From: $3.39
  3. Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    …(150), #7 x 1-1/4" washer-head fine (150), #8 x 2-1/2" washer-head coarse (75), #8 x 1-1/4" washer-head coarse (150), and #7 x 1" pan-head coarse (150). All screws feature a self-tapping tip and deep, #2 square drive recess. Kit contains 675 screws to tackle a wide variety of projects. The upgraded…

    9 Review(s)
    $29.99 $19.99

    SAVE 33%

  4. Kreg® Coarse/Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#8 Screws

    Kreg® Coarse/Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#8 Screws

    …1,000 packs. Washer head seats screw, preventing a crushed pocket & run through.* For softwoods and particleboard, the coarse thread gives you the driving and holding you need, with a self-tapping wood auger tip.* The square drive washer head properly seats the screw in the bottom of the pocket…

    20 Review(s)
    From: $3.59
  5. Hingemaster Truss Head Screws, #8 x 3/4''

    Hingemaster Truss Head Screws, #8 x 3/4''

    …Truss Head Screws greatly reduce the risk of splitting when driving screws without a pilot hole. That time-saving benefit makes them a favorite of professional woodworkers. The large bearing surface of the screw head also helps eliminate pull-through, and makes the screws ideal for fastening…

    $4.19
  6. Lube Finished Screw Kits

    Lube Finished Screw Kits

    …protects screws from surface rust* Additional bin boxes and wall bracket available separately* Lube #6 Screw Kit - Square-X contains 100 each of 5/8'', 3/4'', 1'', 1-1/4'' #6 screws* Lube #8 Screw Kit - Square-X contains 100 each of 1'', 1-1/4'', 1-1/2'' and 2'' #8 screws* Lube #8 Kit - Square Drive

    1 Review(s)
    From: $12.59
  7. Pocket Hole Quick Change Adapter Set

    Pocket Hole Quick Change Adapter Set

    …Quick Change Chuck system (included). Also includes a 6" #2 Square Drive Extension for driving pocket screws.* Set includes 1/4" Professional Quick Change Chuck, 3/8" Shaft Adapter and a 6" #2 Square Drive Extension for driving pocket screws. Insty-Bit® 1/4" Professional Quick Change Chuck* Will…

    9 Review(s)
    $23.67
  8. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments.

    22 Review(s)
    $40.49
  9. Kreg Quick Change Kit

    Kreg Quick Change Kit

    Switch from drilling to driving in seconds with this simple kit! It provides everythingyou need: an innovative Quick-Change Chuck, a 6" long #2 Square Driver, and thenew 3/8" Hex-Shank Pocket Hole Drill Bit (with depth collar and allen wrench). Additional features:* All new 3/8" Hex-Shank Step Drill…

    5 Review(s)
    $29.39
  10. Kreg Deck Jig System

    Kreg Deck Jig System

    …the included bit and drive the deck screws with the included square drive bit. Spacer rings are included to ensure uniform, accurate spacing of deck boards. Additional Features:* Includes the Deck Jig, 6" drill bit, 6" KTX square driver bit, 100 Protec-Kote deck screws, three 5/16" spacer rings,…

    6 Review(s)
    $79.00
  11. Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    …countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments. OPTIONAL ACCESSORIES :

    22 Review(s)
    From: $7.99
  12. Powermatic® 1 HP Drill Press, PM2800B

    Powermatic® 1 HP Drill Press, PM2800B

    …quill * Two independent LED worklights eliminates shadows * Work table can be rotated to a full 90 degree position * Replaceable square table insert with leveling screws make it flush with the top of the table * Oversize cast iron base for added stability * Safety key prevents accidental starting *…

    $1,399.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
Feedback X