1 2 Cove Router Bit

  • Items 1 - 24 of 33
  • Page:
    1. 1
    2. 2
  1. Rockler Cove Router Bits - 1/2" Shank

    Rockler Cove Router Bits - 1/2" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    $26.99 From: $20.24

    SAVE 25%

  2. Freud® Cove Router Bits - 1/2" Shank

    Freud® Cove Router Bits - 1/2" Shank

    Use these coving bit to apply decorative edging to table tops, plaques and signs, and to embellish other profiles and moldings. The shear angle slices through wood similar to the way a finely honed hand plane would. Rugged 1/2" shank deadens vibration, while the finely sharpened carbide ensures a…

    From: $34.97
  3. Rockler Classic Cove Router Bits - 1/2" Shank

    Rockler Classic Cove Router Bits - 1/2" Shank

    …Classic Cove Router Bits feature a small step on either side of a basic cove, adding a bit of definition to an otherwise graceful curve. The bits are available in several radiuses, each with a guide bearing. If desired, a separate larger bearing can be installed to achieve a basic cove. Sturdy 1/2"…

    0 Review(s)
    From: $39.99
  4. Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding*…

    2 Review(s)
    From: $104.47
  5. Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    …crisp, clean edges every time, even with cross-grain cuts in difficult materials.* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers.

    13 Review(s)
    From: $40.47
  6. Rockler Cove Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Cove Horizontal Raised Panel Router Bits - 1/2" Shank

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors.…

    3 Review(s)
    From: $64.99
  7. Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    …door panels. To machine your parts, just use the upper half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a "hinging" action that is perfect for any curved element. The entire bit can also be used as an attractive decorative edge or molding profile.…

    4 Review(s)
    From: $49.99
  8. Freud® 99-269 Entry Door Cove Bead Style Router Bit Set - 1/2" Shank

    Freud® 99-269 Entry Door Cove Bead Style Router Bit Set - 1/2" Shank

    This bit system is designed to build doors with true mortise and tenon structure that will last a lifetime. Matched cove and bead style bits come fully assembled, so you can get to work making beautiful rail and stile joints. Mill a tenon of any length simply by unscrewing the top cutter and bearing…

    1 Review(s)
    $199.97
  9. Rockler Cove Router Bits - 1/4" Shank

    Rockler Cove Router Bits - 1/4" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $24.99
  10. Rockler Cove Vertical Raised Panel Router Bit - 1-1/4" Dia x 1-5/8" H x 1/2" Shank

    Rockler Cove Vertical Raised Panel Router Bit - 1-1/4" Dia x 1-5/8" H x 1/2" Shank

    Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy…

    $54.99
  11. Freud® 99-569 Quadra-Cut™ Cove Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank

    Freud® 99-569 Quadra-Cut™ Cove Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank

    …raiser to mill panels from 3/4" stock that are flush with the door frame for a professional, architecturally correct appearance. The cove profile raised panel bit also includes a back cutter to cut the relief so the panel fits into the groove. This means there's no need to plane panels down to 5/8",…

    4 Review(s)
    $119.97
  12. Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the…

    0 Review(s)
    $142.99
  13. Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set - 1/2" Shank

    Rockler 2-Pc. Drop Leaf Table Rule Joint Router Bit Set - 1/2" Shank

    …craftsmanship. Now, with this dedicated two-piece router bit set, you can get the same precise results whether you're a beginner or a master woodworker. The set bundles a cove bit with a corresponding roundover, specifically selected for a perfect match. Save money over buying the bits separately!

    1 Review(s)
    $64.99
  14. Rockler Cove Crown Molding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    Rockler Cove Crown Molding Router Bit - 1-1/4" Dia x 2-1/4" H x 1/2" Shank

    The beauty of making your own crown moldings is the freedom you have in selecting materials. You can recreate this classic 2-1/4" cove molding profile in any material, including exotic hardwoods. Use it alone as a simple, elegant molding, or as a base to build upon for more elaborate moldings. Once…

    $84.79
  15. Freud® 38-612 Quadra-Cut™ Classical Cove & Round Router Bit - 1-3/8" Dia x 1/2" H x 1/2" Shank

    Freud® 38-612 Quadra-Cut™ Classical Cove & Round Router Bit - 1-3/8" Dia x 1/2" H x 1/2" Shank

    This bit routs a classic edge profile for cabinets, furniture, plaques, and millwork. Freud's exclusive Quadra-Cut™ 4-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Two large cutters shear upward…

    $54.97
  16. Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    …balance that makes it all the more versatile. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks stabilize the bit during the cut for the finest possible finish.

    2 Review(s)
    From: $39.99
  17. Rockler Roman Ogee Router Bits - 1/2" Shank

    Rockler Roman Ogee Router Bits - 1/2" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings.

    $31.99 From: $23.99

    SAVE 25%

  18. Freud® 39-112 Cove and Bead Groove Router Bit - 1-1/4" Dia x 1/2" H x 1/2" Shank

    Freud® 39-112 Cove and Bead Groove Router Bit - 1-1/4" Dia x 1/2" H x 1/2" Shank

    This bit can be used to create ornamental edge profiles and decorative grooves in molding and furniture. For edge profiles, use it with an edge guide or router table. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and…

    $38.47
  19. Freud® 38-504 Quadra-Cut™ Classical Cove & Round Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    Freud® 38-504 Quadra-Cut™ Classical Cove & Round Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    …materials. Application: Decorative edging for cabinets,molding and furniture. * Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. * Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers

    $47.97
  20. Freud® 38-614 Quadra-Cut™ Ogee & Round Router Bit - 1-3/8" Dia x 11/16" H x 1/2" Shank

    Freud® 38-614 Quadra-Cut™ Ogee & Round Router Bit - 1-3/8" Dia x 11/16" H x 1/2" Shank

    …along the edges. The result is an absolutely flawless cut that requires no sanding.* Add distinctive design to cabinets, furniture, plaques and millwork with these decorative edging bits.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers

    3 Review(s)
    $55.47
  21. Rockler Classic Ogee Router Bits - 1/2" Shank

    Rockler Classic Ogee Router Bits - 1/2" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks—the best choice for the smoothest cut and…

    From: $32.99
  22. Rockler Classic Ogee Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    Rockler Classic Ogee Router Bit - 1-1/2" Dia x 11/16" H x 1/4" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. Features a ball-bearing guide to eliminate burning. 1/4" shank.

    $39.99
  23. Rockler Classic Multi-Form Router Bit - 1-1/4" Dia x 1" H x 1/2" Shank

    Rockler Classic Multi-Form Router Bit - 1-1/4" Dia x 1" H x 1/2" Shank

    router bit enables you to make a wide variety of different profiles, including beads, coves and quarter rounds, with a single multi-purpose bit. Just adjust the cutter height and the fence position, and with two or more passes, the profile possibilities are almost unlimited. Use with a router table.

    2 Review(s)
    $52.99
  24. Rockler Custom Door Edge Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Custom Door Edge Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open the door without a pull.

    $59.99
  • Items 1 - 24 of 33
  • Page:
    1. 1
    2. 2
Feedback X