1 2 Shank Router Bit Straight

  • Items 1 - 24 of 44
  • Page:
    1. 1
    2. 2
  1. Rockler Straight Router Bits, 2-Flute, 1/4" Shank

    Rockler Straight Router Bits, 2-Flute, 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  2. Rockler Straight Router Bits, 2-Flute, 1/2" Shank

    Rockler Straight Router Bits, 2-Flute, 1/2" Shank

    Precisely machined for square, straight-sided cuts, Rockler Straight Bits are the perfect candidates for dadoes, grooves and mortises of all sizes. All feature sturdy 1/2" shanks, which reduce vibration and chatter for a smoother cut. This in turn translates to tighter joints and stronger joinery.…

    14 Review(s)
    $14.99 From: $9.99

    SAVE 33%

  3. 4-Piece Straight Bit Set - 1/4" Shank

    4-Piece Straight Bit Set - 1/4" Shank

    This straight bit set includes four of the most useful cut diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises.…

    $54.99
  4. Rockler 4-Pc. Straight Bit Set

    Rockler 4-Pc. Straight Bit Set

    …this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth cut with efficient chip ejection. They can cut up to 1" deep, so they are capable…

    5 Review(s)
    $59.99
  5. Raised Panel Router Bit - Straight

    Raised Panel Router Bit - Straight

    …raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor, and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy 1/2" shank

    4 Review(s)
    $54.99
  6. Undersized Router Bits-1/2 Inch  Shank

    Undersized Router Bits-1/2 Inch Shank

    These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut…

    21 Review(s)
    $20.99 From: $13.99

    SAVE 33%

  7. Undersized Router Bits-1/4 Inch  Shank

    Undersized Router Bits-1/4 Inch Shank

    These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut…

    21 Review(s)
    From: $13.99
  8. 1'' Dish Carving Router Bit 1/2" Shank

    1'' Dish Carving Router Bit 1/2" Shank

    This versatile dish cutter boasts two carbide wings that cut a straight edge with a rounded corner and flat bottom. Ideal for cutting hollows and recesses into shallow bowls, plates, serving trays, jewelry box trays, coasters, coin holders, spoons and lettered signs. As an added benefit, the rounded…

    3 Review(s)
    $34.99
  9. 45° Lock Miter Router Bit -1/2'' Shank

    45° Lock Miter Router Bit -1/2'' Shank

    …more gluing area, so the joint is stronger than a straight miter. Machining parts with the Lock Miter Bit is easy—with the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts,…

    20 Review(s)
    $57.99 $39.99

    SAVE 31%

  10. Large Router Bit Case

    Large Router Bit Case

    The large solid wood case firmly holds 50 1/4" shank and 50 1/2" shanked router bits for easy carrying and convenient storage. High density foam ensures bits won't rattle traveling from job site to job site. The Large Router bit Case measures 7/8'' L x 13-1/8'' W x 4-1/8'' D.

    8 Review(s)
    $52.99
  11. 1'' Dish Carving Router Bit, 1/4" Shank

    1'' Dish Carving Router Bit, 1/4" Shank

    This versatile dish cutter boasts two carbide wings that cut a straight edge with a rounded corner and flat bottom. Ideal for cutting hollows and recesses into shallow bowls, plates, serving trays, jewelry box trays, coasters, coin holders, spoons and lettered signs. As an added benefit, the rounded…

    3 Review(s)
    $29.99
  12. Freud 1/8'' x 5/8'' Single Flute Straight Router Bit

    Freud 1/8'' x 5/8'' Single Flute Straight Router Bit

    …longer bit life and a flawless finish.* Perma-SHIELD® Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and precision-ground for the smoothest possible cuts. Specifications:* Overall Diameter: 1/8"* Carbide Height: 5/8"* Shank: 1/4"* Overall Height: 2"*

    0 Review(s)
    $12.47
  13. 18'' Rockler Router Bit Storage Rack

    18'' Rockler Router Bit Storage Rack

    Keep your supply of router bits organized and easily accessible! This galvanized steel rack features keyhole slots 16" on center to allow easy mounting to wall studs or the side of your router table stand.* Holds 27 1/2" shank bits and 13 1/4" shank bits.* 18" long.

    2 Review(s)
    $15.99
  14. Freud Up-Spiral Router Bits - 1/4'' Shank

    Freud Up-Spiral Router Bits - 1/4'' Shank

    …cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.* Excellent…

    From: $20.47
  15. Piloted Flush Trim Bits 1/4" Shank

    Piloted Flush Trim Bits 1/4" Shank

    …used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two and three flute cutters. * 1/4" shanks.

    From: $15.99
  16. 1/2'' Pattern Router Bit

    1/2'' Pattern Router Bit

    With its 1/4" maximum depth of cut, this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it…

    5 Review(s)
    $18.99
  17. Freud # 91-103 5-Piece Introductory Router Bit Set, 1/2'' Shank

    Freud # 91-103 5-Piece Introductory Router Bit Set, 1/2'' Shank

    Bit:* Freud #: 42-110* Overall Diameter (A): 1/2"* Bearing Diameter: 1/2"* Carbide Height (B): 1"* Shank (C): 1/2"* Overall Height: 3-1/4" 1/4" Straight Router Bit:* Freud #: 12-100* Overall Diameter (A): 1/4"* Carbide Height (B): 3/4"* Shank (C): 1/2"* Overall Height: 2-3/8" Roman Ogee Router Bit:*

    $98.97
  18. Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    …Flute Straight Bit:* Freud #: 12-116* Overall Diameter (A): 1/2"* Carbide Height (B): 1"* Shank (C): 1/2"* Overall Height: 2-5/8" 3/8" Double Flute Straight Bit:* Freud #: 12-108* Overall Diameter (A): 3/8"* Carbide Height (B): 1"* Shank (C): 1/2"* Overall Height: 2-5/8" 1/2" Mortising Bit:* Freud…

    $176.47
  19. Piloted Flush Trim Bits 1/2" Shank

    Piloted Flush Trim Bits 1/2" Shank

    …used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two and three flute cutters. * 1/2" shanks.

    $27.99 From: $18.99

    SAVE 32%

  20. Distinctive Series Dovetail Router Bits, 8mm Shank

    Distinctive Series Dovetail Router Bits, 8mm Shank

    …corner of the tail. Thicker 8mm shanks minimize vibration and chatter. All three work perfectly with the 5/16" straight bit included with Rockler Dovetail Jig (22818). Unconditionally guaranteed. * Precision balanced for smooth operation.* 8mm shanks require router with 1/2" collet and adapter…

    2 Review(s)
    From: $17.99
  21. Small Router Bit Case

    Small Router Bit Case

    …1/2" shanked router bits for easy carrying and convenient storage. Small router bit case is ideal for storing different categories of bits, including straight, roundover, raised panel door and specialty bits. With rubber feet on bottom for standing. Holds 20 1/4'' shank and 30 1/2''. Bits not…

    4 Review(s)
    $36.99
  22. Rockler 5-Pc. Starter Bit Set

    Rockler 5-Pc. Starter Bit Set

    …the bits and protect the cutting edges. Includes five carbide-tipped bits:* Rabbeting bit with four bearings (#91595) for 1/2", 7/16", 3/8" and 5/16" x 1/2" rabbets* 3/4" dia. x 1" long straight bit, 2-fluted (#90638)* 3/8" radius x 5/8" high roundover bit (#29083)* 45° x 1/2" high chamfer bit

    $149.99
  23. Freud 13 Piece Super Bit Set

    Freud 13 Piece Super Bit Set

    Straight Bit (12-100) – 1/4" x 3/4"* Double Flute Straight Bit (12-116) – 1/2" x 1"* Double Flute Straight Bit (12-152) – 3/4" x 1"* Mortising Bit (16-110) – 1/2" x 1/2"* Round Nose Bit (18-114) – 1/4" x 3/8"* V-Groove Bit (20-108) – 3/4" x 1/2"* Dovetail Bit

    2 Review(s)
    $220.47
  24. 2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain,…

    13 Review(s)
    $42.99
  • Items 1 - 24 of 44
  • Page:
    1. 1
    2. 2
Feedback X