1 2 Shank Router Bits

  • Items 1 - 24 of 295
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Dovetail Router Bits - 1/2" Shank

    Rockler Dovetail Router Bits - 1/2" Shank

    All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. You'll find many applications for these bits. Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints…

    2 Review(s)
    From: $14.99
  2. Freud® Cove Router Bits - 1/2" Shank

    Freud® Cove Router Bits - 1/2" Shank

    Use these coving bit to apply decorative edging to table tops, plaques and signs, and to embellish other profiles and moldings. The shear angle slices through wood similar to the way a finely honed hand plane would. Rugged 1/2" shank deadens vibration, while the finely sharpened carbide ensures a…

    From: $34.97
  3. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    …such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $31.97
  4. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    This premium solid carbide bit cuts dadoes with crisp, clean edges on both sides of the dado. The downward spiral forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2" shank. Application: Grooves and…

    3 Review(s)
    From: $50.97
  5. Rockler Cove Router Bits - 1/2" Shank

    Rockler Cove Router Bits - 1/2" Shank

    …an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8" bearing.

    2 Review(s)
    $26.99 From: $20.24

    SAVE 25%

  6. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    …feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Steel pilots can be removed from bits and used with edge guides for wider rabbets.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    2 Review(s)
    From: $42.47
  7. Freud® Mortising Router Bits - 1/2" Shank

    Freud® Mortising Router Bits - 1/2" Shank

    …joinery applications like mortises, and dadoes.* Designed with deep center gullets for maximum material removal without chip loading.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    2 Review(s)
    From: $18.47
  8. Freud® Chamfer Router Bits - 1/2" Shank

    Freud® Chamfer Router Bits - 1/2" Shank

    …on the edge of any work piece to add character, while retaining crisp geometric lines. The width of the chamfered edge is easily adjusted by changing the height of the bit.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $35.47
  9. Plunge Ball Marble Storage Router Bit (1/2" shank)

    Plunge Ball Marble Storage Router Bit (1/2" shank)

    This bit made for us cuts a 5/8" diameter slot for storing marbles used in board games. This bit can be plunged into a game board to make the open and then moved along to cut a storage slot for marbles. 1/2" shank with a 5/8" diameter cutter. If you are not 100% satisfied with these bits, send them…

    $29.99
  10. Rockler Restoration Beading Router Bits - 1/2" Shank

    Rockler Restoration Beading Router Bits - 1/2" Shank

    …effect. In bullnosing applications, a beading bit gives you a true half-round profile, without the flat in the middle that a round over bit would leave. It also machines the edge in one pass rather than two. All of these bits feature sturdy 1/2" shanks for extremely smooth, stable routing.

    2 Review(s)
    From: $26.99
  11. Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    Rockler Classic Roman Ogee Router Bits - 1/2" Shank

    …balance that makes it all the more versatile. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks stabilize the bit during the cut for the finest possible finish.

    2 Review(s)
    From: $39.99
  12. Rockler Roman Ogee Router Bits - 1/2" Shank

    Rockler Roman Ogee Router Bits - 1/2" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings.

    $31.99 From: $23.99

    SAVE 25%

  13. Rockler Classic Cove Router Bits - 1/2" Shank

    Rockler Classic Cove Router Bits - 1/2" Shank

    …Cove Router Bits feature a small step on either side of a basic cove, adding a bit of definition to an otherwise graceful curve. The bits are available in several radiuses, each with a guide bearing. If desired, a separate larger bearing can be installed to achieve a basic cove. Sturdy 1/2" shanks,

    0 Review(s)
    From: $39.99
  14. Rockler Cove Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Cove Horizontal Raised Panel Router Bits - 1/2" Shank

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors.…

    3 Review(s)
    From: $64.99
  15. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  16. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    …guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way). This allows…

    1 Review(s)
    From: $27.59
  17. Rockler Ogee Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Ogee Horizontal Raised Panel Router Bits - 1/2" Shank

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors.…

    2 Review(s)
    From: $64.99
  18. Rockler Edge Beading Router Bits - 1/2" Shank

    Rockler Edge Beading Router Bits - 1/2" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    $34.99 From: $26.24

    SAVE 25%

  19. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …mortises. It's also the ideal bit for pattern routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal…

    1 Review(s)
    From: $51.47
  20. Rockler Undersized Straight Router Bits - 1/2" Shank

    Rockler Undersized Straight Router Bits - 1/2" Shank

    …straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves,…

    21 Review(s)
    From: $14.49
  21. Rockler Shutter Louver Router Bits - 1/2" Shank

    Rockler Shutter Louver Router Bits - 1/2" Shank

    Use our Louver Router Bits to create your own shutter louvers in 2-1/2" or 3-1/2" widths. The louvers interface seamless with other elements of the Rockler Shutter System. The included ball-bearing guide runs along the middle of the shutter slat—just rout one side, then turn the slat around to…

    0 Review(s)
    From: $41.99
  22. Rockler Classic Ogee Router Bits - 1/2" Shank

    Rockler Classic Ogee Router Bits - 1/2" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. Sturdy 1/2" shanks—the best choice for the smoothest cut and…

    From: $32.99
  23. Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding*…

    2 Review(s)
    From: $104.47
  24. Rockler Straight Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Straight Horizontal Raised Panel Router Bits - 1/2" Shank

    Provided your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curved profiles, such as for arched doors or cathedral-style doors.…

    4 Review(s)
    From: $64.99
  • Items 1 - 24 of 295
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X