1 4 Bit

  • Items 1 - 24 of 542
  • Page:
    1. 1
    2. 2
    3. 3
  1. 1/4''Miniature Roundover Router Bit

    1/4''Miniature Roundover Router Bit

    With its undersized 8mm bearing, this 1/4" round over bit dips nimbly in and out of corners, virtually eliminating the widely arcing, shallow-cut corners that would result from an ordinary bit with a standard sized bearing. Perfect for profiling smaller scale projects like jewelry boxes, music boxes…

    $19.99
  2. 1/4" Self-Centering Replacement Bit

    1/4" Self-Centering Replacement Bit

    Designed for Rockler Woodworking and Hardware. These bits offer dead-on centering accuracy. Use with our JIG-IT Templates for Shelf Pins or Cribbage Templates for perfect results every time.

    $8.49
  3. Dovetail Router Bits-1/4" Shank

    Dovetail Router Bits-1/4" Shank

    All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. You'll find many applications for these bits. Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints…

    2 Review(s)
    From: $13.99
  4. 1/4" Pro Shelf Drilling Bit

    1/4" Pro Shelf Drilling Bit

    Save time and eliminate the possibility of misaligned shelves. Paired with the easy-to-use Pro Shelf Drilling Jig, the 1/4'' Pro Shelf Drilling Bit provides uniform pin holes.

    1 Review(s)
    $16.49
  5. 1-1/4'' Dish Carving Router Bit

    1-1/4'' Dish Carving Router Bit

    The integral guide bearing on this Dish Carving Bit makes it easy to creat custom bowls and trays in any shape you can cut a template for. Features a carbide tip that's been final sharpened with an 800 grit diamond wheel for smooth cutting. Use it to remove large amounts of wood with minimal effort.…

    $42.99
  6. Roman Ogee Router Bits-1/4" Shank

    Roman Ogee Router Bits-1/4" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings. 1/4" shanks.

    1 Review(s)
    From: $31.99
  7. Edge Beading Router Bit-1/4" Shank

    Edge Beading Router Bit-1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  8. Mortise Chisel Bit 1/4"

    Mortise Chisel Bit 1/4"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/4" mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $34.49
  9. Undersized Router Bits-1/4 Inch  Shank

    Undersized Router Bits-1/4 Inch Shank

    …straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves,…

    21 Review(s)
    From: $13.99
  10. Cove Router Bits-1/4 Inch Shank

    Cove Router Bits-1/4 Inch Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $24.99
  11. V-Groove Router Bits-1/4 Inch Shank

    V-Groove Router Bits-1/4 Inch Shank

    …V-groove bits are available in several angles to cut grooves of varying depths. They are commonly used for sign-making, as the V-groove provides excellent shadow and definition for letters and text. They are also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits

    2 Review(s)
    From: $19.99
  12. Core Box Router Bits-1/4"  Shank

    Core Box Router Bits-1/4" Shank

    Our Core Box Bits are available in several angles to cut rounded grooves and slots of varying widths that can be both decorative and functional. Sometimes called round nose bits, they are commonly used for sign-making, and are also ideal for fluted columns, finger pulls, drain grooves on cutting…

    5 Review(s)
    From: $17.99
  13. 1'' Dish Carving Router Bit, 1/4" Shank

    1'' Dish Carving Router Bit, 1/4" Shank

    This versatile dish cutter boasts two carbide wings that cut a straight edge with a rounded corner and flat bottom. Ideal for cutting hollows and recesses into shallow bowls, plates, serving trays, jewelry box trays, coasters, coin holders, spoons and lettered signs. As an added benefit, the rounded…

    3 Review(s)
    $29.99
  14. 1/4" Shank Rabbeting Bit Set

    1/4" Shank Rabbeting Bit Set

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. 1/4" shank.

    $44.99
  15. Classic Roman Ogee Router Bits-1/4" Shank

    Classic Roman Ogee Router Bits-1/4" Shank

    The symmetry of this edge profile exhibits a balance that is pleasing to the eye. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. 1/4" shank.

    2 Review(s)
    From: $39.99
  16. 3/4" Diameter X 1" High Molding Bit

    3/4" Diameter X 1" High Molding Bit

    Give your furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, crown molding, door casings, trim, pilasters, window casing/sills, baseboards and picture frames, you can use the full profile, or just a portion of it to achieve the look you want.…

    1 Review(s)
    $37.99
  17. Roundover/ Beading Router Bits-1/4 Inch Shank

    Roundover/ Beading Router Bits-1/4 Inch Shank

    …for a beaded edge—these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to…

    13 Review(s)
    From: $22.99
  18. 1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

    1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

    …offers many unique router bits, including Ball Nose Bits, End Mill Bits, Conical Ball Bits, and Half-Conical Bits for CNC Carving Machines. Technical Details:* Collet reduces your standard 1/4" collet to a 4mm collet, which accepts the unique Click-N-Carve router bit shanks.* Compression slots…

    $6.99
  19. 1/4'' Hex x 3'' Magnetic Bit Holder

    1/4'' Hex x 3'' Magnetic Bit Holder

    …Hex x 3" Magnetic Bit Holder from Lutz®! A strong magnet holds the bit inside the socket while you work. Made from heat-treated S-2 tool steel for durability. Technical Details:* Strong magnet holds the bit inside the socket while you work* Lutz® high-performance power bit holder* Made from…

    $3.29
  20. 1-1/16" Diameter X 3/4" High Drawer Lock Bit

    1-1/16" Diameter X 3/4" High Drawer Lock Bit

    This unique bit is similar to a locking rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To…

    5 Review(s)
    $44.99
  21. Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank

    Rockler 45 Degree Chamfer Router Bits-1/4 Inch Shank

    …Chamfer Bits are among the most useful and popular bits in our router bit lineup. Chamfer bits are extremely versatile, since the size of the chamfer can be easily varied by adjusting the depth of cut. For this reason, it can be cost effective to buy a larger chamfer bit, as even a very large bit

    5 Review(s)
    From: $24.99
  22. 3 Wing Slotting Cutters - Router Bits-1/4" Shank

    3 Wing Slotting Cutters - Router Bits-1/4" Shank

    …your material. With the slot width of your choice, you can create slots and grooves for frame and panel doors, picture frames, glass retainer and more. The 3-wing design provides a smooth cut and a longer cutting life. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.

    15 Review(s)
    $35.99
  23. Piloted Flush Trim Bits 1/4" Shank

    Piloted Flush Trim Bits 1/4" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    From: $15.99
  24. Classic Ogee Router Bit, 1/4" Shank

    Classic Ogee Router Bit, 1/4" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. Features a ball-bearing guide to eliminate burning. 1/4" shank.

    $39.99
  • Items 1 - 24 of 542
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X