1 Bit

  • Items 1 - 24 of 796
  • Page:
    1. 1
    2. 2
    3. 3
  1. 1-1/4'' Dish Carving Router Bit

    1-1/4'' Dish Carving Router Bit

    The integral guide bearing on this Dish Carving Bit makes it easy to creat custom bowls and trays in any shape you can cut a template for. Features a carbide tip that's been final sharpened with an 800 grit diamond wheel for smooth cutting. Use it to remove large amounts of wood with minimal effort.…

    $42.99
  2. 1/2'' Pattern Router Bit

    1/2'' Pattern Router Bit

    With its 1/4" maximum depth of cut, this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it…

    5 Review(s)
    $18.99
  3. 1/4''Miniature Roundover Router Bit

    1/4''Miniature Roundover Router Bit

    With its undersized 8mm bearing, this 1/4" round over bit dips nimbly in and out of corners, virtually eliminating the widely arcing, shallow-cut corners that would result from an ordinary bit with a standard sized bearing. Perfect for profiling smaller scale projects like jewelry boxes, music boxes…

    $19.99
  4. 1/4" Self-Centering Replacement Bit

    1/4" Self-Centering Replacement Bit

    Designed for Rockler Woodworking and Hardware. These bits offer dead-on centering accuracy. Use with our JIG-IT Templates for Shelf Pins or Cribbage Templates for perfect results every time.

    $8.49
  5. Dovetail Router Bits-1/4" Shank

    Dovetail Router Bits-1/4" Shank

    All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. You'll find many applications for these bits. Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints…

    2 Review(s)
    From: $13.99
  6. Dovetail Router Bits-1/2" Shank

    Dovetail Router Bits-1/2" Shank

    All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. You'll find many applications for these bits. Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints…

    2 Review(s)
    From: $14.99
  7. 1/4" Pro Shelf Drilling Bit

    1/4" Pro Shelf Drilling Bit

    Save time and eliminate the possibility of misaligned shelves. Paired with the easy-to-use Pro Shelf Drilling Jig, the 1/4'' Pro Shelf Drilling Bit provides uniform pin holes.

    1 Review(s)
    $16.49
  8. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …on the base of the mortise for the wedge ring to rest in. Using the 1/2" Tenon-Lok™ Dovetail Drill Bit: 1. Drill a standard 1/2" round mortise with a forstner bit or another bit of your choice. 2. Chuck the 1/2" Tenon-Lok™ cutting tool in your drill. 3. Before starting the drill,…

    2 Review(s)
    $25.49
  9. 1/2'' Convex Edging Router Bit

    1/2'' Convex Edging Router Bit

    Our Convex Edging Bit can be used to rout the rounded flanks of homemade Lincoln logs—a children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table…

    1 Review(s)
    $29.99
  10. 1/8'' Miniature Roundover Router Bit

    1/8'' Miniature Roundover Router Bit

    …miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts! This bit features a small 1/8" radius, and can be used as a round over bit, or lowered to create a bead on one face of the workpiece. 1/8" radius bits are also ideal for…

    2 Review(s)
    $19.99
  11. 1/8'' Double Flute Straight Bit

    1/8'' Double Flute Straight Bit

    This versatile cutter does a staggering amount of work. It can rout dadoes and rabbets, cut grooves for inlays, rout mortises (both for hinges and tenons), flatten or shape panels, rout specially shaped holes and cleanly cut round holes, and shape and duplicate parts with a template. Plus, you'll…

    2 Review(s)
    $20.99 $14.69

    SAVE 30%

  12. Roman Ogee Router Bits-1/4" Shank

    Roman Ogee Router Bits-1/4" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings. 1/4" shanks.

    1 Review(s)
    From: $31.99
  13. Roman Ogee Router Bits-1/2" Shank

    Roman Ogee Router Bits-1/2" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings.

    From: $31.99
  14. Classic Cove Router Bits-1/2" Shank

    Classic Cove Router Bits-1/2" Shank

    Our Classic Cove Router Bits feature a small step on either side of a basic cove, adding a bit of definition to an otherwise graceful curve. The bits are available in several radiuses, each with a guide bearing. If desired, a separate larger bearing can be installed to achieve a basic cove. Sturdy…

    0 Review(s)
    From: $39.99
  15. Edge Beading Router Bit-1/4" Shank

    Edge Beading Router Bit-1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  16. Edge Beading Router Bits-1/2" Shank

    Edge Beading Router Bits-1/2" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    $34.99 From: $23.99

    SAVE 31%

  17. Undersized Router Bits-1/4 Inch  Shank

    Undersized Router Bits-1/4 Inch Shank

    …straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves,…

    21 Review(s)
    From: $13.99
  18. Undersized Router Bits-1/2 Inch  Shank

    Undersized Router Bits-1/2 Inch Shank

    …straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves,…

    21 Review(s)
    $20.99 From: $13.99

    SAVE 33%

  19. Cove Router Bits-1/4 Inch Shank

    Cove Router Bits-1/4 Inch Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $24.99
  20. V-Groove Router Bits-1/4 Inch Shank

    V-Groove Router Bits-1/4 Inch Shank

    …V-groove bits are available in several angles to cut grooves of varying depths. They are commonly used for sign-making, as the V-groove provides excellent shadow and definition for letters and text. They are also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits

    2 Review(s)
    From: $19.99
  21. Cove Router Bits-1/2 Inch Shank

    Cove Router Bits-1/2 Inch Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $25.99
  22. Core Box Router Bits-1/4"  Shank

    Core Box Router Bits-1/4" Shank

    Our Core Box Bits are available in several angles to cut rounded grooves and slots of varying widths that can be both decorative and functional. Sometimes called round nose bits, they are commonly used for sign-making, and are also ideal for fluted columns, finger pulls, drain grooves on cutting…

    5 Review(s)
    From: $17.99
  23. Core Box Router Bits-1/2"  Shank

    Core Box Router Bits-1/2" Shank

    Our Core Box Bits are available in several angles to cut rounded grooves and slots of varying widths that can be both decorative and functional. Sometimes called round nose bits, they are commonly used for sign-making, and are also ideal for fluted columns, finger pulls, drain grooves on cutting…

    5 Review(s)
    From: $23.99
  24. Mortise Chisel Bit 1/4"

    Mortise Chisel Bit 1/4"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 1/4" mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $34.49
  • Items 1 - 24 of 796
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X