1 4 Router Bit

  • Items 1 - 24 of 348
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Bevel Router Bit - 1/4" Shank

    Rockler Bevel Router Bit - 1/4" Shank

    When used as a laminate trimming bit, the bevel cleans up any excess adhesive, and also knocks down any sharp edges or slivers that remain. The bits feature 1/2" ball bearing guides to prevent any burning on the edge of your workpiece. 1/4" shanks.

    $19.99
  2. Rockler Dovetail Router Bits - 1/4" Shank

    Rockler Dovetail Router Bits - 1/4" Shank

    All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. You'll find many applications for these bits. Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints…

    2 Review(s)
    From: $13.99
  3. Rockler Cove Router Bits - 1/4" Shank

    Rockler Cove Router Bits - 1/4" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $24.99
  4. Freud® Ogee Router Bits - 1/4" Shank

    Freud® Ogee Router Bits - 1/4" Shank

    …these decorative ogee edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.*…

    From: $40.47
  5. Rockler V-Groove Router Bits - 1/4" Shank

    Rockler V-Groove Router Bits - 1/4" Shank

    …V-groove bits are available in several angles to cut grooves of varying depths. They are commonly used for sign-making, as the V-groove provides excellent shadow and definition for letters and text. They are also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits

    2 Review(s)
    From: $19.99
  6. Freud® Dovetail Router Bits - 1/4" Shank

    Freud® Dovetail Router Bits - 1/4" Shank

    bits for drawer stock, and the 13/16"H dovetail bits for 3/4" thick carcases. Cut all composition materials, plywoods, hardwoods and softwoods. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life…

    From: $17.47
  7. Freud® Up-Spiral Router Bits - 1/4" Shank

    Freud® Up-Spiral Router Bits - 1/4" Shank

    …carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as…

    From: $20.47
  8. Freud® Down-Spiral Router Bits - 1/4" Shank

    Freud® Down-Spiral Router Bits - 1/4" Shank

    …and laminates.* Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $19.97
  9. Freud® Beading Router Bits - 1/4" Shank

    Freud® Beading Router Bits - 1/4" Shank

    Cut with confidence with this Freud quality router bit! Ideal for decorative work.* Add an attractive bead profile to furniture and millwork * Cuts all composition materials, plywoods, hardwoods, and softwoods* Use on hand-held and table-mounted portable routers

    From: $29.97
  10. Freud® Chamfer Router Bits - 1/4" Shank

    Freud® Chamfer Router Bits - 1/4" Shank

    …character, while retaining crisp geometric lines.* Use 22-1/2 degree chamfer bits for 8-sided constructions, and 30 degree bits for 6-sided constructions.* Chamfer size easily adjusts by changing the height of the bit.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on…

    From: $29.47
  11. Freud® Cove Router Bits - 1/4" Shank

    Freud® Cove Router Bits - 1/4" Shank

    Create smooth, classic cove profiles with Freud cove bits, which have a shear angle that slices wood similar to the way a craftsman uses a hand plane. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.

    From: $33.97
  12. Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    The symmetry of this edge profile exhibits a balance that is pleasing to the eye. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. 1/4" shank.

    2 Review(s)
    From: $39.99
  13. Rockler Roman Ogee Router Bits - 1/4" Shank

    Rockler Roman Ogee Router Bits - 1/4" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings. 1/4" shanks.

    1 Review(s)
    From: $31.99
  14. Rockler Edge Beading Router Bits - 1/4" Shank

    Rockler Edge Beading Router Bits - 1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  15. Rockler Keyhole Slot Router Bits - 1/4" Shank

    Rockler Keyhole Slot Router Bits - 1/4" Shank

    …with a centered slot. * Rout two or more horizontal slots for larger hangings.* For added convenience, use with our Picture Hanging Keyhole Template. We recommend using the 3/8" Hanging Slot Router Bit (92024) and 5/8" Short Shank Guide Bushing and Nut (38756) with the template (Sold Separately).

    7 Review(s)
    From: $14.99
  16. Rockler Up-Cut Spiral Mortising Router Bits - 1/4" Shank

    Rockler Up-Cut Spiral Mortising Router Bits - 1/4" Shank

    Onsrud up-cut spiral router bits are perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide.

    6 Review(s)
    From: $17.99
  17. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    …the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two…

    From: $15.99
  18. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    …straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves,…

    21 Review(s)
    From: $13.99
  19. Rockler 45° Chamfer Router Bits - 1/4" Shank

    Rockler 45° Chamfer Router Bits - 1/4" Shank

    …Chamfer Bits are among the most useful and popular bits in our router bit lineup. Chamfer bits are extremely versatile, since the size of the chamfer can be easily varied by adjusting the depth of cut. For this reason, it can be cost effective to buy a larger chamfer bit, as even a very large bit

    5 Review(s)
    From: $24.99
  20. Rockler Roundover/ Beading Router Bits - 1/4" Shank

    Rockler Roundover/ Beading Router Bits - 1/4" Shank

    …for a beaded edge—these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to…

    13 Review(s)
    From: $22.99
  21. Rockler Signmaking Carbide Router Bits - 1/4" Shank

    Rockler Signmaking Carbide Router Bits - 1/4" Shank

    …letters. Recommended for use with plunge router. 1/4" shank. The 3/8" Signmaking Carbide Router Bit is required for the 2-1/4" Rockler Interlock Signmaker's Templates - State Park Font Kit (48356, sold separately). The 5/8" Signmaking Carbide Router Bit is required for the 3-3/8" Rockler Interlock…

    From: $19.99
  22. Rockler Miniature Round Over Router Bits - 1/4" Shank

    Rockler Miniature Round Over Router Bits - 1/4" Shank

    Rockler Miniature Round Over Router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts! With its undersized 8mm bearing, these round over bits dips nimbly in and out of corners, virtually eliminating the widely arcing, shallow-cut corners that…

    $19.99
  23. Freud® 90° V Grooving Router Bits - 1/4" Shank

    Freud® 90° V Grooving Router Bits - 1/4" Shank

    …adding decorative accents to furniture and plaques. Freud's "V" grooving bits are designed to cut deep or shallow 90 degree "V" grooves. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    From: $21.47
  24. Freud® Roman Ogee Router Bits - 1/4" Shank

    Freud® Roman Ogee Router Bits - 1/4" Shank

    …materials. Application: Decorative edging for cabinets,molding and furniture. * Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. * Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers

    From: $39.97
  • Items 1 - 24 of 348
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X