1 4 Shank

  • Items 1 - 24 of 221
  • Page:
    1. 1
    2. 2
    3. 3
  1. Dovetail Router Bits-1/4" Shank

    Dovetail Router Bits-1/4" Shank

    All of our dovetail bits are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. You'll find many applications for these bits. Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints…

    2 Review(s)
    From: $13.99
  2. 1'' Dish Carving Router Bit, 1/4" Shank

    1'' Dish Carving Router Bit, 1/4" Shank

    This versatile dish cutter boasts two carbide wings that cut a straight edge with a rounded corner and flat bottom. Ideal for cutting hollows and recesses into shallow bowls, plates, serving trays, jewelry box trays, coasters, coin holders, spoons and lettered signs. As an added benefit, the rounded…

    3 Review(s)
    $29.99
  3. Roman Ogee Router Bits-1/4" Shank

    Roman Ogee Router Bits-1/4" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings. 1/4" shanks.

    1 Review(s)
    From: $31.99
  4. V-Groove Router Bits-1/4 Inch Shank

    V-Groove Router Bits-1/4 Inch Shank

    Our V-groove bits are available in several angles to cut grooves of varying depths. They are commonly used for sign-making, as the V-groove provides excellent shadow and definition for letters and text. They are also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality…

    2 Review(s)
    From: $19.99
  5. Core Box Router Bits-1/4"  Shank

    Core Box Router Bits-1/4" Shank

    Our Core Box Bits are available in several angles to cut rounded grooves and slots of varying widths that can be both decorative and functional. Sometimes called round nose bits, they are commonly used for sign-making, and are also ideal for fluted columns, finger pulls, drain grooves on cutting…

    5 Review(s)
    From: $17.99
  6. Undersized Router Bits-1/4 Inch  Shank

    Undersized Router Bits-1/4 Inch Shank

    These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut…

    21 Review(s)
    From: $13.99
  7. Edge Beading Router Bit-1/4" Shank

    Edge Beading Router Bit-1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  8. Sanding Drum 1" by 1" with 1/4" shank

    Sanding Drum 1" by 1" with 1/4" shank

    1" diameter x 1" long expanding rubber sanding drum can be used in a hand drill or drill press to smooth curved edges. Tighten the nut on top of the drum counterclockwise to expand the drum and secure the sanding sleeve. Replacement sanding sleeves available in coarse, medium and fine grits.

    $5.99
  9. Sanding Drum 3/4" by 1" with 1/4" shank

    Sanding Drum 3/4" by 1" with 1/4" shank

    3/4" diameter x 1" long expanding rubber sanding drum can be used in a hand drill or drill press to smooth curved edges. Tighten the nut on top of the drum counterclockwise to expand the drum and secure the sanding sleeve. Replacement sanding sleeves available in coarse, medium and fine grits.

    $4.99
  10. Cove Router Bits-1/4 Inch Shank

    Cove Router Bits-1/4 Inch Shank

    …an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8" bearing.

    2 Review(s)
    From: $24.99
  11. 1/4" Shank Arbor

    1/4" Shank Arbor

    Mount 4" diameter coated aluminum oxide sandpaper "stars" (sold separately in five grits) onto this 1/4" shank arbor and chuck it in a drill for hassle-free sanding of wood moldings, curved pieces and textured surfaces.

    $17.19
  12. Classic Ogee Router Bit, 1/4" Shank

    Classic Ogee Router Bit, 1/4" Shank

    The symmetry of this edge profile exhibits a pleasing balance. A simple cove with a matching round over, nothing more, nothing less. Features a ball-bearing guide to eliminate burning. 1/4" shank.

    $39.99
  13. Rockler Straight Router Bits, 2-Flute, 1/4" Shank

    Rockler Straight Router Bits, 2-Flute, 1/4" Shank

    One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal. They are also capable of cutting mortises. Each bit has two carbide flutes that are precision ground for the smoothest possible cuts, and a long cutting life…

    11 Review(s)
    From: $13.99
  14. Classic Roman Ogee Router Bits-1/4" Shank

    Classic Roman Ogee Router Bits-1/4" Shank

    The symmetry of this edge profile exhibits a balance that is pleasing to the eye. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. 1/4" shank.

    2 Review(s)
    From: $39.99
  15. 3/8" Signmaking Carbide Router Bit, 1/4" Shank

    3/8" Signmaking Carbide Router Bit, 1/4" Shank

    Required router bit for the 2-1/4" Rockler Interlock Signmaker's Templates - State Park Font Kit (48356, sold separately). Specially designed for signmaking applications, with a flatter bottom to prevent peaks in routed letters. Recommended for use with plunge router. 1/4" shank.

    $19.99
  16. 5/8" Signmaking Carbide Router Bit, 1/4" Shank

    5/8" Signmaking Carbide Router Bit, 1/4" Shank

    Required router bit for the 3-3/8" Rockler Interlock Signmaker's Templates - State Park Font Kit (43820, sold separately). Specially designed for signmaking applications, with a flatter bottom to prevent peaks in routed letters. Recommended for use with plunge router. 1/4" shank.

    $21.99
  17. Round Over/Beading Bit Set - 1/4" Shank

    Round Over/Beading Bit Set - 1/4" Shank

    …router bit set includes three popular sizes of radius bits with bearings to convert each bit from a round-over to a bead edge profile. Router bits are tipped with premium grade carbide, precision balanced and finely honed for a clean cut. Includes 1/8", 1/4" and 3/8" radius bits. 1/4" shank bits.

    $79.99
  18. 4-Piece Straight Bit Set - 1/4" Shank

    4-Piece Straight Bit Set - 1/4" Shank

    …1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises. These precision balanced router bits are made from top grade carbide and have a baked-on anti-stick…

    $54.99
  19. Piloted Flush Trim Bits 1/4" Shank

    Piloted Flush Trim Bits 1/4" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    From: $15.99
  20. Porter Cable 1/4'' Panel Pilot, 1/4'' Shank

    Porter Cable 1/4'' Panel Pilot, 1/4'' Shank

    …Panel Pilot Bit is just the thing for cutting template designs, cutting openings for power outlets in drywall, paneling, siding, and a lot more! Use it on hardwoods, softwoods, plywood, MDF, aluminum sheeting, insulation and drywall. * Tipped with micrograin carbide.* Shank turned from solid steel.

    $9.99 $4.99

    SAVE 50%

  21. Roundover/ Beading Router Bits-1/4 Inch Shank

    Roundover/ Beading Router Bits-1/4 Inch Shank

    With two included bearings—one flush for a standard round over, and one slightly smaller for a beaded edge—these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both…

    13 Review(s)
    From: $22.99
  22. Freud Up-Spiral Router Bits - 1/4'' Shank

    Freud Up-Spiral Router Bits - 1/4'' Shank

    …mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank. Application: Cutting mortises and routing deep blind holes* Freud’s solid carbide up spiral bits combine effective chip removal with a cut…

    From: $20.47
  23. Freud Down-Spiral Router Bits - 1/4'' Shank

    Freud Down-Spiral Router Bits - 1/4'' Shank

    …the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2'' shank. Application: Grooves and dadoes in single-sided veneers and laminates.* Freud's solid carbide down spiral bits are ideal for smooth, chip-free…

    From: $19.97
  24. 2-1/4' Cove Crown Molding Bit, 1/2' Shank

    2-1/4' Cove Crown Molding Bit, 1/2' Shank

    The beauty of making your own crown moldings is the freedom you have in selecting materials. You can recreate this classic 2-1/4" cove molding profile in any material, including exotic hardwoods. Use it alone as a simple, elegant molding, or as a base to build upon for more elaborate moldings. Once…

    $84.79
  • Items 1 - 24 of 221
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X