1 8 In Router Bit

  • Items 1 - 24 of 135
  • Page:
    1. 1
    2. 2
    3. 3
  1. 1/2'' Convex Edging Router Bit

    1/2'' Convex Edging Router Bit

    Our Convex Edging Bit can be used to rout the rounded flanks of homemade Lincoln logs—a children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table…

    1 Review(s)
    $29.99
  2. 1/8'' Miniature Roundover Router Bit

    1/8'' Miniature Roundover Router Bit

    Rockler miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts! This bit features a small 1/8" radius, and can be used as a round over bit, or lowered to create a bead on one face of the workpiece. 1/8" radius bits are also ideal…

    2 Review(s)
    $19.99
  3. Full Bead Router Bit

    Full Bead Router Bit

    …bearings, this beading bit lets you cut further into the panel, and in a variety of configurations, both freehand and in a table. It also doubles as a 1/4" round over bit - just raise the bit until only the bottom radius is exposed. Two flutes and 5/8" bearings. Top quality bits that meet the high…

    $49.99
  4. Triple Bead Router Bit

    Triple Bead Router Bit

    Whether you need three beads in a row, or just a single bead for a decorative edge, this multi-purpose beading bit will suit your needs. Just crank the bit up or down to reveal as much of the cutter as is required. Cuts 1-3 beads in a single pass, potentially tripling productivity. Ideally suited…

    3 Review(s)
    $46.99
  5. Rabbeting Router Bit

    Rabbeting Router Bit

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. Sturdy 1/2" shank.

    15 Review(s)
    $39.99 $27.99

    SAVE 30%

  6. Classic Cove Router Bits-1/2" Shank

    Classic Cove Router Bits-1/2" Shank

    Our Classic Cove Router Bits feature a small step on either side of a basic cove, adding a bit of definition to an otherwise graceful curve. The bits are available in several radiuses, each with a guide bearing. If desired, a separate larger bearing can be installed to achieve a basic cove. Sturdy…

    0 Review(s)
    From: $39.99
  7. Rockler Router Bit Tune-up Kit

    Rockler Router Bit Tune-up Kit

    …wrenches. Comes in a convenient plastic storage case. Bits not included. Kit contains:* 1 — 1/2" i.d.x 3/4" o.d bearing* 1 — 1/4" i.d x 1/2" o.d bearing* 1 — 1/4" i.d x 5/8" o.d bearing* 1 — 3/16" i.d x 3/8" o.d bearing* 1 — 3/16" i.d x 1/2" o.d bearing* 1 — 3/16"…

    1 Review(s)
    $47.99
  8. 1/4" Shank Rabbeting Bit Set

    1/4" Shank Rabbeting Bit Set

    This carbide rabbeting bit includes bearings for 5/16", 3/8", 7/16" and 1/2" deep rabbets. You can vary the cutting depth by changing bearings with the included hex wrench. Perfect for joinery applications such as for setting in cabinet backs. 1/4" shank.

    $44.99
  9. 4 Piece 8mm Dovetail Router Bit Upgrade

    4 Piece 8mm Dovetail Router Bit Upgrade

    This router bit set features 8mm shanks, which are 25% larger than 1/4" bits. The extra mass in the shank helps to reduce chatter. Ideal for joining case goods, the set includes 1/2" x 14° and dovetail bits, a 5/16" straight bit, and 1/2" to 8mm collet adapter. The straight bit can be…

    1 Review(s)
    $54.99
  10. Cove Router Bits-1/4 Inch Shank

    Cove Router Bits-1/4 Inch Shank

    …an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8" bearing.

    2 Review(s)
    From: $24.99
  11. Rockler Rabbeting Bit Set

    Rockler Rabbeting Bit Set

    With a full 1" of carbide length and four interchangeable bearings, this rabbeting bit is capable of cutting in horizontally at 5/16", 3/8", 7/16" and 1/2" increments, and up to 1" vertically, infinitely adjustable with your router. The carbide is ground to a fine edge to provide the longest…

    1 Review(s)
    $49.99
  12. Rockler 4-Pc. Straight Bit Set

    Rockler 4-Pc. Straight Bit Set

    …four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth cut with efficient chip ejection. They can cut up to 1" deep, so they are capable of…

    5 Review(s)
    $59.99
  13. Rockler Cove Vertical Raised Panel Router Bit, 1-1/4" Diameter x 1-5/8"H

    Rockler Cove Vertical Raised Panel Router Bit, 1-1/4" Diameter x 1-5/8"H

    Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy…

    $54.99
  14. Freud 1/8'' x 5/8'' Single Flute Straight Router Bit

    Freud 1/8'' x 5/8'' Single Flute Straight Router Bit

    bit was designed for maximum chip clearance — ideal for fast feed rates in a production environment. A relief in the end of the bit allows for fast plunging without bogging down. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well…

    0 Review(s)
    $12.47
  15. Cove Router Bits-1/2 Inch Shank

    Cove Router Bits-1/2 Inch Shank

    …an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8" bearing.

    2 Review(s)
    From: $25.99
  16. Freud # 91-103 5-Piece Introductory Router Bit Set, 1/2'' Shank

    Freud # 91-103 5-Piece Introductory Router Bit Set, 1/2'' Shank

    …well-used router bits in the shop, this 5-Piece Introductory Router Bit Set is sure to see plenty of use. The flush-trim bit is indispensable for flushing up face frames and shelf caps with their mating panels. Use the 1/4" straight bit for routing grooves and dadoes. The ogee and round over bits

    $98.97
  17. Plunge Ball Marble Storage Router Bit (1/2" shank)

    Plunge Ball Marble Storage Router Bit (1/2" shank)

    This bit made for us cuts a 5/8" diameter slot for storing marbles used in board games. This bit can be plunged into a game board to make the open and then moved along to cut a storage slot for marbles. 1/2" shank with a 5/8" diameter cutter. If you are not 100% satisfied with these bits, send them…

    $29.99
  18. Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    …of bits for joinery and decorative effects.* Set comes in Freud's unique shadow box case, which hangs on the wall or mounts on the bench to keep bits handy and safe.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.* Features…

    $176.47
  19. Round Over/Beading Bit Set - 1/4" Shank

    Round Over/Beading Bit Set - 1/4" Shank

    Get six router bit profiles in one handy set! This router bit set includes three popular sizes of radius bits with bearings to convert each bit from a round-over to a bead edge profile. Router bits are tipped with premium grade carbide, precision balanced and finely honed for a clean cut. Includes…

    $79.99
  20. Onsrud Down-Cut Spiral Bits

    Onsrud Down-Cut Spiral Bits

    …* Recommended when chip flow should be directed down for a clean cut on top of the material.* High speed steel.* Available in 3/8" and 1/4" diameters. 28741: 1/4" Shank, 1/4" Cutter Dia., 1" Cutter Length, 3" Overall length 24959: 1/2" Shank, 3/8" Cutter Dia., 1" Cutter Length, 3-1/2" Overall length

    From: $19.39
  21. Vertical Panel Router Bit Set With Wooden Case

    Vertical Panel Router Bit Set With Wooden Case

    …are full height cutters. This means that if you jog your router table fence, they can be used to joint off saw marks—no need to sand or joint before routing. In addition, they feature guide bearings for template work such as arch-top doors. All bits have sturdy 1/2" shanks for minimal chatter.

    1 Review(s)
    $149.99
  22. Roundover/ Beading Router Bits-1/4 Inch Shank

    Roundover/ Beading Router Bits-1/4 Inch Shank

    …for a beaded edge—these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to…

    13 Review(s)
    From: $22.99
  23. Roundover/ Beading Router Bits-1/2 Inch  Shank

    Roundover/ Beading Router Bits-1/2 Inch Shank

    …for a beaded edge—these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to…

    13 Review(s)
    From: $22.99
  24. Freud® Bevel Trim Router Bits

    Freud® Bevel Trim Router Bits

    …Trim Router Bits are the perfect candidates. Available in bevels of 8°, 15° and 45°, the bits cut all plastic laminates and can be used with handheld routers, table-mounted portable routers and compact laminate trimmers. 1/2" bearing guide.* TiCo™ Hi-Density carbide for longer bit

    From: $28.97
  • Items 1 - 24 of 135
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X