2 Part Glue

  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
  1. Nexabond 2500 Wood Adhesive

    Nexabond 2500 Wood Adhesive

    …becoming visible when the water evaporates and the joint line shrinks.* Because Nexabond contains no water, it is also an excellent adhesive for joining extremely oily woods.* Tight joints are important, since the parts won't swell as they do with waterbased glues.* Accepts most stains and finishes.

    2 Review(s)
    From: $7.99
  2. Baluster Fasteners, 2" Length (Pack of 20)

    Baluster Fasteners, 2" Length (Pack of 20)

    …gluing. Includes aluminum self-threading drill driver and four 1/4" steel dowel screws. Pack of 20 steel dowel screws for baluster fastening also available. * Fastens balusters to stairs and floors* Adds strength* Requires no glue* Will not loosen over time* Includes a driver, 4 baluster fasteners

    $8.39
  3. BarrelBond 5-Minute Epoxy Gel Glue

    BarrelBond 5-Minute Epoxy Gel Glue

    …the glue alsostrengthens the blank from the inside out to help prevent blowouts. BarrelBondis waterproof, flexible, easy to trim and sand, and has an indefinite shelf life.Bonds exceptionally well to all wood species, including oily exotics, as well asplastics, acrylics and metal. 2 oz. Technical…

    $15.49
  4. Edge V-Groove Bit, 1/2" Shank

    Edge V-Groove Bit, 1/2" Shank

    …When it's time to clamp up an edge joint, the parts slide into perfect alignment without any twisting, prying or hammering. The deep channel created by the V-Groove Bit also increases the available glue surface of the joint, creating a much better glue bond. Ideal for applying solid wood edging, and…

    1 Review(s)
    From: $39.99
  5. 7mm x 1/2" Barrel Trimmer

    7mm x 1/2" Barrel Trimmer

    Clear excess adhesive from your 7mm pen tubes and square up the ends of your blank in one easy step! The Barrel Trimmer clears glue residue from the barrel and also provides a flat, square mating surface and a tight fit for your hardware. Hex-head screws provide a no-slip interface. The Barrel…

    8 Review(s)
    $34.99
  6. Natural Cork

    Natural Cork

    …board. Natural cork is also great for coaster linings, drawer liners, scratch guards and more! 24" x 48" roll. * Natural tan color.* Can be cut with scissors or utility knife and straight edge.* Can be attached to your own substrate with contact cement, white glue, wood glue or double faced tape.

    2 Review(s)
    $15.99
  7. Rail Bolt Fastener with Plugs

    Rail Bolt Fastener with Plugs

    Rail bolt fastener with plugs fastens hand rails to newel posts and walls. Hides bolt hole under hand rail, and requires no glue, nails or screws. Includes 5/16" x 3-1/2" rail bolt, flanged nut, curved washer and two hardwood plugs to conceal drill hole (choose plug that best fits project).* Fastens…

    1 Review(s)
    $6.99
  8. Short Stop for Rockler T-Track System

    Short Stop for Rockler T-Track System

    …when sanding or machining. Short Stops can be used on one end of the board to hold your work while belt sanding, hand planing, or scraping dried glue off of a panel. The keyway on the bottom of the Short Stop runs parallel to the stop face. Two other stop styles are available separately: Inline…

    $6.99
  9. Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/2" Shank

    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/2" Shank

    …you to machine joints for curved parts.* Designed to cut a tongue and groove joint for 3/4" stock. * Depth of groove is 3/8".* Ball bearing guide lets you follow the material. * Includes one arbor, two 22mm bearings, and two cutters.* Shim pack lets you adjust the fit for the strongest glue joint.

    10 Review(s)
    $59.99
  10. Long Stop for Rockler T-Track System

    Long Stop for Rockler T-Track System

    …for easy clearance when belt sanding, hand planing, or scraping dried glue. Long Stops are also ideally suited for pocket hole face frame assembly. Use two Long Stops to create a square corner to support your face frame parts while drilling. The increased length of the Long Stop spans the joint…

    $12.99
  11. Stop Kit for Rockler T-Track System

    Stop Kit for Rockler T-Track System

    …that fold flat for tool clearance. Use the Short Stops on one end of the board to hold your work while belt sanding, hand planing, or scraping dried glue. Use the Inline Stops to sandwich a board so you can work in either direction. For light clamping pressure, tap some carpenter's shims between one…

    $24.99
  12. Festool Domino® Tenons-Larger Packages

    Festool Domino® Tenons-Larger Packages

    …and solid wood applications, the dense beech tenon will not expand or telegraph through material, leaving you with clean, flat, and consistent surfaces. The Domino Tenon is embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue.

    $85.00
  13. Manhattan Pen Tubes, 5-Pack

    Manhattan Pen Tubes, 5-Pack

    …Details:* Replacement tubes for use with Manhattan Pen Hardware Kits (sold separately: 47863, 43431, 43429, 43435, 46997 etc).* Use a 27/64" drill bit to drill the blank before inserting tubes.* Glue tubes in place with with medium CA (cyanoacrylate) glue or two-part fast drying epoxy.

    $4.99 $3.99

    SAVE 20%

  14. Bookmark Hardware Kit-Bookmark Hardware Kit

    Bookmark Hardware Kit-Bookmark Hardware Kit

    …Just use the Bookmark Turning Mandrel (43641, sold separately below) to turn a small disc of your most beautiful wood to the same diameter, then glue it into place. Available in Gold or Chrome finish. Sold in 5-Packs. Technical Details:* The Bookmark Hardware Kit includes five bookmarks.* Bookmarks…

    1 Review(s)
    $6.99 $3.49

    SAVE 50%

  15. Kreg® Klamp Table KKS1000

    Kreg® Klamp Table KKS1000

    …frames with this innovative assembly table. Simply slide your parts against the stops, clamp in place and drive your screws! Aluminum Klamp Trak features a channel that accepts sliding Klamp Block stops and Bench Klamps (Klamp Table includes 2 Bench Klamps). Adjustable Klamp Blocks quickly square up…

    1 Review(s)
    $249.00
  16. 1-1/16" Diameter X 3/4" High Drawer Lock Bit

    1-1/16" Diameter X 3/4" High Drawer Lock Bit

    …gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To machine your parts, run the drawer fronts flat on the router table and the sides vertically against your fence. Sturdy 1/2" shank.

    5 Review(s)
    $44.99
  17. Specklebelly Goose Call Hardware - Winglock Calls

    Specklebelly Goose Call Hardware - Winglock Calls

    …price.Technical Details:* Turn your own game call - combines two great hobbies into one fun project.* Turn, sand and dry fit parts to ensure proper fit.* Polyurethane glue is recommended for assembly.* Use 1-1/2" square turning stock or larger.* A great project for shop cut-offs.* Turning blank not…

    $16.99
  18. Koostik Passive Amplifier for iPhones

    Koostik Passive Amplifier for iPhones

    …pre-machined 2-9/16-inch x 1/2-inch slot that fits all versions of the iPhone.* The kit comes in two parts and includes detailed assembly instructions.* Most machining is already done - just glue on the faceplate, cut to size, sand and finish.* Overall dimensions are 3-1/2-inch x 8-1/2-inch x…

    1 Review(s)
    $49.99
  19. Stainless Steel Ice Cream Scoop Hardware Kit

    Stainless Steel Ice Cream Scoop Hardware Kit

    …you may need a scroll-type chuck for your headstock and a Jacobs-style chuck for your tailstock. Glue and finish: The tang can be glued into the handle with epoxy or a thick type of CA ("super glue"). The finish could be with a drying type of oil such as pure tung oil or boiled linseed oil. An oil…

    14 Review(s)
    $13.99 $10.99

    SAVE 21%

  20. 100% Pure Acetone

    100% Pure Acetone

    …consumer-grade solvent available. It is ideal for thinning fiberglass resin, cleaning fiberglass tools and dissolving two-part epoxies and super glue before hardening. A heavy-duty degreaser, it is great for prepping metal before painting. Also thins polyester resins, vinyl and adhesives. Easily…

    1 Review(s)
    $11.19
  21. The Way to Woodwork DVD Series from Woodworker's Journal-Individual Volumes

    The Way to Woodwork DVD Series from Woodworker's Journal-Individual Volumes

    …Demo: Hand Plane* Chapter 11: Shaping Parts & Final Assembly Volume 2* Chapter 1: Ash Table: Introduction & Preparing Stock* Chapter 2: Marking & Cutting Mortise & Tenons* Chapter 3: Ash Table: Shaping Parts & Angled Shoulders* Chapter 4: Ash Table: Glue up & Finish* Chapter 5: Bookcase:…

    1 Review(s)
    $29.99
  22. 3/8'' Beadlock® Basic Starter Kit

    3/8'' Beadlock® Basic Starter Kit

    …the amount of precious face-grain glue surface. The result is an extremely strong, totally concealed joint. Included shim set allows you to mortise a variety of stock thicknesses, as well as to offset your mortises.* Mortises in curved and tapered parts are simple.* For narrow material, rip…

    29 Review(s)
    $29.99
  23. The Way to Woodwork DVD Series from Woodworker's Journal

    The Way to Woodwork DVD Series from Woodworker's Journal

    …Demo: Hand Plane* Chapter 11: Shaping Parts & Final Assembly Volume 2* Chapter 1: Ash Table: Introduction & Preparing Stock* Chapter 2: Marking & Cutting Mortise & Tenons* Chapter 3: Ash Table: Shaping Parts & Angled Shoulders* Chapter 4: Ash Table: Glue up & Finish* Chapter 5: Bookcase:…

    $79.99
  24. Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/4" Shank

    Rockler Tongue and Groove Router Bit, 3/8" Cutter Width X 1/4" Cutter Height, 1/4" Shank

    …you to machine joints for curved parts.* Designed to cut a tongue and groove joint for 3/4" stock. * Depth of groove is 3/8".* Ball bearing guide lets you follow the material. * Includes one arbor, two 22mm bearings, and two cutters.* Shim pack lets you adjust the fit for the strongest glue joint.

    10 Review(s)
    $57.99
  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
Feedback X