2 Morse Taper

  • Grid List
  • Page:
    1. 1
  • Items 1 - 22 of 22
  • Page:
    1. 1
  1. Nova Tailstock Chuck Adaptor

    Nova Tailstock Chuck Adaptor

    …work with a chuck e.g. in conjunction with vacuum chucking.* #2 morse taper fits all Nova chucks and Nova lathe tailstocks.* Made from medium tensile carbon K1045 steel to provide maximum structural strength.* 1-1/4" 8-TPI RH thread (USA, Canada, Australasia and the UK).* 2 year warranty

    $37.99
  2. Wood Lathe Tailstock Center, MT2

    Wood Lathe Tailstock Center, MT2

    …to a 60 degree point and includes a #2 morse taper. Also available for #1 morse taper. Technical Details:* Live center (revolving center) features sealed ball bearings for smooth, maintenance-free operation.* Precision machined to a 60 degree point.* Includes #2 morse taper (permanently attached)

    $24.99
  3. Adjustable Pen Mandrel #2 Taper

    Adjustable Pen Mandrel #2 Taper

    …mandrel as needed - no more hassling with spacers. Turn two barrels at once, or single barrels up to 6'' long. Consult your lathe's instruction manual to determine the appropriate MT (morse taper) size. 7mm shaft. This mandrel is also available with a #1 Morse Taper (44341, sold separately).

    $21.99
  4. Lathe Chuck and Tapers

    Lathe Chuck and Tapers

    1/2"drill chuck for lathe and two choices of morse tapers. Use this drill chuck and either the #1 Morse taper or #2 Morse taper listed to assemble as shown. Key is supplied with chuck. Both #20777 and either #20785 or #20793 need to be ordered to complete assembly as shown. This assembly is used on…

    9 Review(s)
    From: $16.99
  5. Nova Acruline 2MT Alignment System

    Nova Acruline 2MT Alignment System

    …when the headstock is moved back to the inline position. The #2 morse tapers fit most brands, but check the manual for your specific lathe to find the morse taper size. * 2MT alignment tool is suitable for all lathes with a #2 morse taper tailstock.* Precisely machined from high-grade steel.* Fits…

    $18.99
  6. Starter Pen Turning Kit

    Starter Pen Turning Kit

    …Includes 3 pen blanks (Bloodwood, Bubinga and Olivewood), 3 gold-plated hardware kits with twist mechanisms, 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill for truing up all mating surfaces and a storage case with 28…

    14 Review(s)
    $72.49
  7. Robert Sorby Stebcentre with #2 Morse Taper

    Robert Sorby Stebcentre with #2 Morse Taper

    Replace your traditional spur drive with the Revolutionary Robert Sorby Stebcentre Morse Taper! An essential addition to every turner's toolkit, it incorporates a spring loaded point in stainless steel and a set of razor sharp teeth that bite into the workpiece. Provides added security for the…

    From: $69.99
  8. Pro Pen Turning Mandrel, #2 Morse Taper

    Pro Pen Turning Mandrel, #2 Morse Taper

    …onto the shaft and tighten it at the correct location for your blank. This Pro Pen Turning Mandrel includes a #2 morse taper arbor for use with a #2 morse taper lathe, a 7mm mandrel shaft and knurled nut. The mandrel is also available with a #1 Morse Taper (44309, sold separately).

    $14.99
  9. Nova Live Center System With Stepped Cone

    Nova Live Center System With Stepped Cone

    …all lathes with a standard #2 morse taper tailstock quill. * Versatile - over 6 mounting options in one handy unit.* Morse taper allows quick-change capability for fast setups.* Durable, high-quality triple bearing system.* Fits all lathes with standard #2 morse taper (2MT) tailstock quill.*…

    $73.49
  10. Pen Turning Mandrel, #2 Morse Taper

    Pen Turning Mandrel, #2 Morse Taper

    …bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!This Pen Turning Mandrel system includes a #2 morse taper arbor for use with a #2 morse taper lathe, 7 mm mandrel shaft and knurled nut. Also available for #1 Morse Taper Mandrel (Sold Separately).

    $17.49
  11. Mandrel Shaft for Pen Turning Mandrel, #2 Morse Taper

    Mandrel Shaft for Pen Turning Mandrel, #2 Morse Taper

    …for the Pen Turning Mandrel, #2 Morse Taper (43537, sold separately). Save money by buying only what you need. Technical Details:* Precision machined from mild steel.* 180mm in length.* 6.2mm in diameter.* M6 x 1.0 threads on both ends.* Flats allow for tightening the mandrel onto your morse taper.

    $6.99
  12. Acrylic Pen Buffing System

    Acrylic Pen Buffing System

    …with plastic rouge, and a final buffing on the flannel wheel yields an unbelievable shine that shows no scratches, even under a loupe. System includes: #2 Morse taper, thick 8mm shaft, Teflon spacers, special blue plastic rouge, cotton-muslin application wheel and cotton-flannel polishing wheel.

    1 Review(s)
    $48.29
  13. Pen Turning Mandrel, #1 Morse Taper

    Pen Turning Mandrel, #1 Morse Taper

    …bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required! This Pen Turning Mandrel system includes a #1 morse taper arbor for use with a #1 morse taper lathe, 7 mm mandrel shaft and knurled nut. Also available for #2 Morse Taper Mandrel (Sold Separately).

    $15.99 $9.99

    SAVE 38%

  14. Adjustable Pen Turning Mandrel, #1 Morse Taper

    Adjustable Pen Turning Mandrel, #1 Morse Taper

    …the mandrel as needed - no more hassling with spacers. Turn two barrels at once, or single barrels up to 6'' long. Consult your lathe's instruction manual to determine the appropriate MT (morse taper) size. 7mm shaft. This mandrel is also available with a #2 Morse Taper (48377, sold separately).

    $20.99
  15. Pro Pen Turning Mandrel, #1 Morse Taper

    Pro Pen Turning Mandrel, #1 Morse Taper

    …onto the shaft and tighten it at the correct location for your blank. This Pro Pen Turning Mandrel includes a #1 morse taper arbor for use with a #1 morse taper lathe, a 7mm mandrel shaft and knurled nut. The mandrel is also available with a #2 Morse Taper (49514, sold separately).

    $13.99
  16. Key Ring Hardware Kit - Gold

    Key Ring Hardware Kit - Gold

    …drill chuck required! This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings.…

    1 Review(s)
    $3.99 $2.49

    SAVE 38%

  17. Plateau Rollerball Pen Hardware Kit - Gold

    Plateau Rollerball Pen Hardware Kit - Gold

    …drill bit listed below to complete pen. Turning Accessories Needed: Turning Blank (Sold Separately) 7mm Mandrel A with #2 Morse Taper (#43537 Sold Separately) #1 Morse Taper Adaptor (#27050 Sold Separately) 7.35mm Mandrel B (requires #43537)(#25581 Sold Separately) Plateau FT/RB Bushing Set…

    $6.49
  18. Nova Simple Live Center

    Nova Simple Live Center

    …a long useful life, and solid workholding capabilities. The #2 morse taper fits most brands, but check the manual for your specific lathe to find the morse taper size. * 2MT Center, suitable for all lathes with a #2 morse taper tailstock.* Heavy-duty sealed ball bearings for long life.* Steel…

    $21.99
  19. Wood Lathe Tailstock Live Center, MT1

    Wood Lathe Tailstock Live Center, MT1

    …degree point and includes a #1 morse taper. Also available for #2 morse taper. Technical Details:* Live center (revolving center) features sealed ball bearings for smooth, maintenance-free operation.* Precision machined to a 60 degree point.* Includes #1 morse taper (permanently attached).*…

    $24.99
  20. Plateau Magnifying Glass Hardware Kit

    Plateau Magnifying Glass Hardware Kit

    …Kit provides you with: (1) 2 1/2'' hardened optical acrylic lens, attachment hardware, a #2 morse taper arbor, mandrel shaft, knurled nut and end pieces. Designed to fit a 7mm mandrel shaft, this kit will require Magnifying Glass Bushings, a Adjustable Mandrel #2 Taper, a 7mm Drill bit and a Pen…

    $7.59 $3.99

    SAVE 47%

  21. Oneway Live Center

    Oneway Live Center

    …candle-stick type artistry.* Knock Out Rod: Used to remove center points and as a spindle stop when attaching and removing cones.* Includes #2 Morse Taper Note: If turning outside the capacity of the provided cone, a user specific support can be made by drilling a hole in a blank, attaching it to…

    1 Review(s)
    $130.19
  22. Spirit Pen Kit

    Spirit Pen Kit

    …It features a 24-karat gold-plated tapered barrel and cap and comes equipped with a Schmidt® ceramic rollerball refill for smooth, consistent performance. To make a Spirit Pen, you will also need Spirit Pen Bushings (47169), a 7mm Mandrel with a Morse taper to fit your lathe, a 13/32" drill bit…

    1 Review(s)
    $12.99 $2.99

    SAVE 77%

  • Grid List
  • Page:
    1. 1
  • Items 1 - 22 of 22
  • Page:
    1. 1
Feedback X