3 4 Straight Router Bit

  • Items 1 - 24 of 46
  • Page:
    1. 1
    2. 2
  1. Rockler 4-Piece Straight Bit Set - 1/4" Shank

    Rockler 4-Piece Straight Bit Set - 1/4" Shank

    This straight bit set includes four of the most useful cut diameters of this popular router bit type: 1/4", 3/8", 1/2", and 3/4". They are well suited for joining case goods using dados, grooves and rabbets. Bits are designed to produce up to a 1" cut depth, so they can also be used to cut mortises.…

    $54.99
  2. Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    Rockler 4-Pc. Straight Bit Set - 1/2" Shank

    …rabbets for your cabinetry and furniture with this four-piece boxed set of straight router bits. The set includes the most commonly used straight bits: 1/4", 3/8", 1/2" and 3/4", and comes in a convenient storage box. All bits are double flute, combining a smooth cut with efficient chip ejection.…

    5 Review(s)
    $59.99
  3. Rockler Undersized Plywood Router Bit Set

    Rockler Undersized Plywood Router Bit Set

    …result, regular size bits usually don't cut a tight-fitting dado. Fortunately, undersized dado bits like these will help your joinery fit perfectly, resulting in stronger assemblies and nearly invisible joint lines. This set includes the three most common sizes of straight bits for undersized…

    10 Review(s)
    $44.99
  4. Freud® 3-Pc. Undersized Plywood Router Bit Set

    Freud® 3-Pc. Undersized Plywood Router Bit Set

    …protects bits from heat and pitch build up. Set comes in Freud's new case with bit mount to keep bits handy and safe. All bits have 1/4'' shanks. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table mounted portable routers. * These Freud bits are designed…

    From: $51.47
  5. Onsrud Down-Cut Spiral Router Bits

    Onsrud Down-Cut Spiral Router Bits

    …* Recommended when chip flow should be directed down for a clean cut on top of the material.* High speed steel.* Available in 3/8" and 1/4" diameters. 28741: 1/4" Shank, 1/4" Cutter Dia., 1" Cutter Length, 3" Overall length 24959: 1/2" Shank, 3/8" Cutter Dia., 1" Cutter Length, 3-1/2" Overall length

    From: $19.39
  6. Freud® 91-100 13 Piece Super Router Bit Set - 1/2" Shank

    Freud® 91-100 13 Piece Super Router Bit Set - 1/2" Shank

    Straight Bit (12-100) – 1/4" x 3/4"* Double Flute Straight Bit (12-116) – 1/2" x 1"* Double Flute Straight Bit (12-152) – 3/4" x 1"* Mortising Bit (16-110) – 1/2" x 1/2"* Round Nose Bit (18-114) – 1/4" x 3/8"* V-Groove Bit (20-108) – 3/4" x 1/2"* Dovetail Bit

    2 Review(s)
    $220.47
  7. Freud® 89-650 4-Pc. Undersized Plywood Router Bit Set - 1/2" Shank

    Freud® 89-650 4-Pc. Undersized Plywood Router Bit Set - 1/2" Shank

    …and 3/4" nominal thickness stock, without the unsightly gaps that result from standard sized bits. Set comes in Freud's unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on…

    5 Review(s)
    $79.97
  8. Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    Rockler 5-Pc. Starter Bit Set - 1/2 Shank

    …the bits and protect the cutting edges. Includes five carbide-tipped bits:* Rabbeting bit with four bearings (#91595) for 1/2", 7/16", 3/8" and 5/16" x 1/2" rabbets* 3/4" dia. x 1" long straight bit, 2-fluted (#90638)* 3/8" radius x 5/8" high roundover bit (#29083)* 45° x 1/2" high chamfer bit

    $149.99
  9. Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P636 Straight Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured…

    $142.99
  10. Rockler Dado Jig for Low Profile Straight Edge Clamp System

    Rockler Dado Jig for Low Profile Straight Edge Clamp System

    …used with a 1/2" straight bit.* Any straight bit can be used, but the user will have to account for the different offset from the edge of the dado sled. This means you can use a 1/4" straight bit for dadoes under 1/2", or a 3/4" straight bit for wider dadoes.* Works with any straight edge!* For the…

    1 Review(s)
    $44.99 $32.99

    SAVE 27%

  11. Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    Freud® 90-160 5-Pc. Down-Spiral Solid Carbide Router Bit Set

    …bench to keep bits organized and protected. Solid carbide bits cut all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers. * Create mortises and dadoes with chip-free top surfaces.* Solid carbide construction.* The Down Spiral Bit Set is an…

    $159.97
  12. Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    Freud® 90-150 5-Pc. Up Cut Spiral Router Bit Set

    …Carbide Height: 1"* Shank Diameter: 1/2"* Overall Length: 3" Up-Cut Spiral Bit (75-106)* Overall Diameter: 3/8"* Carbide Height: 1-1/4"* Shank Diameter: 1/2"* Overall Length: 3" Up-Cut Spiral Bit (75-108)* Overall Diameter: 1/2"* Carbide Height: 1-1/4"* Shank Diameter: 1/2"* Overall Length: 3"

    $159.97
  13. Rockler Chamfer Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Chamfer Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …run stock face down on table. Stack the bit (starting from the shank end) as follows: profile cutter, straight cutter, then bearing.* To cope the ends of the rails, run stock face up on table. Stack the bit (starting from the shank end) as follows: straight cutter, bearing, then profile cutter.*…

    1 Review(s)
    $69.99
  14. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    …used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two and three flute cutters. * 1/4" shanks.

    From: $15.99
  15. Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Our Convex Edging Bit can be used to rout the rounded flanks of homemade Lincoln logs—a children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table…

    1 Review(s)
    $29.99
  16. Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …run stock face down on table. Stack the bit (starting from the shank end) as follows: profile cutter, straight cutter, then bearing.* To cope the ends of the rails, run stock face up on table. Stack the bit (starting from the shank end) as follows: straight cutter, bearing, then profile cutter.*…

    1 Review(s)
    $69.99
  17. Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …run stock face down on table. Stack the bit (starting from the shank end) as follows: profile cutter, straight cutter, then bearing.* To cope the ends of the rails, run stock face up on table. Stack the bit (starting from the shank end) as follows: straight cutter, bearing, then profile cutter.*…

    2 Review(s)
    $69.99
  18. Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    …well-used router bits in the shop, this 5-Piece Introductory Router Bit Set is sure to see plenty of use. The flush-trim bit is indispensable for flushing up face frames and shelf caps with their mating panels. Use the 1/4" straight bit for routing grooves and dadoes. The ogee and round over bits

    $98.97
  19. Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    …edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints…

    $176.47
  20. Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …both straight and arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are…

    0 Review(s)
    $142.99
  21. Rockler Shear Flush Trim Bit Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Shear Flush Trim Bit Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, figured…

    13 Review(s)
    $34.99
  22. Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Bevel Raised Panel Router Bits - 1/2" Shank

    This straight panel raiser cuts a classic design most famously employed in Shaker furniture. It is primarily designed to raise Shaker panels, but can also be used to bevel the underside of table tops. It features Freud's exclusive Quadra-Cut™ 4-cutter design, which provides the smoothest cuts…

    1 Review(s)
    From: $98.97
  23. Rockler P605 Ogee Raised Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P605 Ogee Raised Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …to cut both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured…

    $137.79
  24. Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    …producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, cross-grain and figured grain on hardwoods. Dual bearings mounted at both top and bottom make this an extremely versatile template routing bit.

    13 Review(s)
    $42.99
  • Items 1 - 24 of 46
  • Page:
    1. 1
    2. 2
Feedback X