3 Forstner Bit

  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
  1. Individual Standard Forstner Bits, High Carbon Steel-Standard Forstner Bits - 3/8" Shank

    Individual Standard Forstner Bits, High Carbon Steel-Standard Forstner Bits - 3/8" Shank

    …holes for cup hinges, mortising,doweling, hardware installation, or finishing up your turned salt & peppershakers! These high carbon steel Forstner Bits have two bottom cutting edgesthat cut side grain or end grain for smooth, accurate holes. A center brad pointand the outer sharpened rim keeps…

    36 Review(s)
    From: $5.99
  2. Long Shank Carbide Forstner Bits - Standard Sizes

    Long Shank Carbide Forstner Bits - Standard Sizes

    These professional quality carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These…

    2 Review(s)
    From: $21.99
  3. 6-Pc. Fractional Forstner Bit Set

    6-Pc. Fractional Forstner Bit Set

    …15/16" bits with 3/8" round shanks.* Great for instrument mounting, cutting arcs, overlapping holes, and boring through veneer or other thin materials.* Bits have two bottom cutting edges that efficiently shear through wood.* Exterior cutting rim, along with the inner brad point, keeps the bit in…

    20 Review(s)
    $33.49
  4. 35 mm Long Shank Carbon Steel Forstner Bit

    35 mm Long Shank Carbon Steel Forstner Bit

    Perfect for doweling, mortising, pocket holes, hardware installation and more! Features a 4'' long shaft and 3/8'' diameter shank.

    $23.99
  5. 22-Piece Forstner Bit Set

    22-Piece Forstner Bit Set

    Pre-sharpened high carbon steel bits are ready to use in any type of wood. Cut precision flat-bottom holes without tear-out. Set includes 22 forstner bits in common, standard sizes plus a storage case. * With 3/8" round shanks.* Multi-spurs on bits 1" and larger increase cutting ability and reduce…

    63 Review(s)
    $158.99
  6. Individual Metric Forstner Bits-Metric Forstner Bits - 3/8" Shank

    Individual Metric Forstner Bits-Metric Forstner Bits - 3/8" Shank

    …through the perimeter for a clean finish every time. Perfect for doweling, mortising, pocket holes, hardware installation and more! Also available in standard sizes.* Presharpened High Carbon Steel bits are ready to use in any type of wood* Exceptionally smooth sidewalls and no surface tear-out

    19 Review(s)
    From: $12.99
  7. 5-piece Pro Series Professional Tenon Cutter Kit

    5-piece Pro Series Professional Tenon Cutter Kit

    Build a wide variety of log furniture and other projects! Includes 1/2", 3/4", 1", 1-1/2"and 2" tenon cutters, forstner bits, quick stop system and plans for five furniture projects including a headboard, coffee table, coat rack and more. Tenon cutters are machined from aluminum for maximum…

    $799.00
  8. 16-Pc. Forstner Bit Set

    16-Pc. Forstner Bit Set

    …Set includes 16 forstner bits in common, standard sizes plus a storage case. * Use with a drill press or hand drill.* Set comes in durable molded platic index box.* All bits have 3" long shafts with 3/8" diameter shanks and are forged from high carbon steel.* Presharpened bits are ready to use…

    40 Review(s)
    $100.99
  9. 3-piece Professional Series Master Tenon Cutter Kit

    3-piece Professional Series Master Tenon Cutter Kit

    This is the most popular set to build railings, beds, coffee tables and more. Includes 1",1-1/2" and 2" tenon cutters, forstner bits, quick stop system and a set of five plans for popular furniture projects. Tenon cutters are machined from aluminum for maximum precision and minimum weight and…

    $569.00
  10. Forstner Bit Extender

    Forstner Bit Extender

    Get an extra 2-1/2" of reach into deep holes with this Forstner bit extender. Great for rustic furniture and joining wide timbers. Also works with any other style of 3/8" shank drill bit greater than 1" in diameter.Forstner bit not included.

    9 Review(s)
    $6.49
  11. 7-Pc. Forstner Bit Set

    7-Pc. Forstner Bit Set

    …pocket holes, hardware installation and more! Set has 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" bits with 3/8" round shanks. Use with a drill press or hand drill. Technical Details:* Presharpened bits are ready to use in any type of wood* Cut precision flat bottomed holes with exceptionally smooth…

    26 Review(s)
    $34.49
  12. Rockler Forstner Bit Sharpening Kit

    Rockler Forstner Bit Sharpening Kit

    This economical three-piece kit will renew the cutting power of worn down forstner bits and more. Perfect for any forstner bit (including carbide-tipped and multi-spurbits), it includes a 600 grit diamond honing stone, 600 grit triangular diamond file, a CeramCut™ honing stone and complete…

    2 Review(s)
    $18.99
  13. Salt and Pepper Shaker Turning Kit

    Salt and Pepper Shaker Turning Kit

    …with chrome-plated tops; one hole for the pepper, three holes for the salt. Durable plastic bodies taper slightly toward the base, assuring an easy fit into your custom turned shakers. Items You Might Need Individual Standard Forstner Bits, High Carbon Steel-Standard Forstner Bits - 3/8" Shank

    0 Review(s)
    $9.99
  14. 30mm Easy Mortise Hinges

    30mm Easy Mortise Hinges

    Featuring a Bronze finish, these 30mm mortise hinges are both a good value and easy to install. Ideal for folding doors. Technical Details:* Open size is 1-15/16" Long x 1-3/16" Wide* Bronze finish* Packaged in pairs, screws included* 30mm carbide Forstner bit sold separately

    4 Review(s)
    $3.69
  15. Long Shank Carbide Forstner Bits-Metric Sizes

    Long Shank Carbide Forstner Bits-Metric Sizes

    These professional quality carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These…

    1 Review(s)
    From: $36.99
  16. 6 Piece Spade Drill Bit Set

    6 Piece Spade Drill Bit Set

    Drill flat-bottomed holes quickly with these quality steel spade bits. Contoured paddles allow fast drilling. Bits are 3/8'', 5/8'', 9/16'', 13/16'' and 7/8'' sizes and are 6'' long including the hexagonal shank for easy changes in and out of your drill.

    $14.99 $4.99

    SAVE 67%

  17. Minifix (KD) Fittings-Minifix Fittings

    Minifix (KD) Fittings-Minifix Fittings

    …a center punch. Includes drill guide bushing for drilling 8mm horizontal hole. Includes clamp and drill guide. Drill bits and Stop Collars For 3/4" Minifix, use #28516 8mm Brad Point bit with and #21249 15mm Forstner bit. For 1/2" Minifix, use #28516 8mm Brad Point bit and #21172 1/2" Forstner bits.

    14 Review(s)
    $7.39
  18. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …wedge ring to rest in. Using the 1/2" Tenon-Lok™ Dovetail Drill Bit: 1. Drill a standard 1/2" round mortise with a forstner bit or another bit of your choice. 2. Chuck the 1/2" Tenon-Lok™ cutting tool in your drill. 3. Before starting the drill, position the Tenon-Lok™ cutter all…

    2 Review(s)
    $25.49
  19. Magswitch Magnetic Jigs-Magswitch MagJigs

    Magswitch Magnetic Jigs-Magswitch MagJigs

    …by drilling a hole using a Forstner bit into 3/4" thick material.* Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in the MagJigs.* #28844 has 150 lb. breakaway and requires a 40mm hole. Use recommended forstner bit below - #21284* #21910 has 95…

    11 Review(s)
    From: $27.99
  20. 3-Piece Countersink Bit Set for Log Tenon Cutters

    3-Piece Countersink Bit Set for Log Tenon Cutters

    …or 2" diameter hole with a forstner bit, then use this countersink bit (with the appropriate guide bore) to create a perfectly shaped shoulder. Set includes the triangular blade, a 1" diameter shaft, 1-1/2" and 2" guide bores, and an allen wrench for assembling the bit and changing bores. 1/2"…

    1 Review(s)
    $169.00
  21. Clamp Tite Drill Stop

    Clamp Tite Drill Stop

    …even pressure around the perimeter of the bit. Because of this, it resists loosening and shifting, which can mar the drill bit and unexpectedly change drilling depth. Use a 7/64" Allen wrench to tighten and loosen the drill stop. * For 3/8" drill bits* Split collar design helps prevent slippage*…

    2 Review(s)
    $4.79
  22. 10-Piece Avenger Carbide Hole Saw Set

    10-Piece Avenger Carbide Hole Saw Set

    …it cool, and also provides some wiggle room so the drop-off piece doesn't get stuck. Carbide hole saws also make an excellent alternative to forstner bits, as unlike the latter, they can be used in a hand drill as well as in a drill press. This set of carbide hole saws includes the following sizes:…

    $169.99
  23. Solid Brass Lid Support Hinge

    Solid Brass Lid Support Hinge

    …a 35mm forstner bit - just clamp the lid and box together and drill to the appropriate depth. Hinges can also be surface-mounted. Includes screws. Technical Details:* Hinges measure approximately 35mm in diameter (1-3/8") so they work with a standard 35mm hinge cup drilling bit.* Hinges can…

    1 Review(s)
    $22.99
  24. Rockler JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    Rockler JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    …three or more hinges. Mounting plate JIG IT® templates are also available for specific hinges and can be used on the 30" rail for matching the position of the hinge cups on the door. This jig requires a special long-shank Forstner drill bit (sold separately) that is sized to fit the hinge cup.

    14 Review(s)
    $93.99
  • Items 1 - 24 of 26
  • Page:
    1. 1
    2. 2
Feedback X