34 124

  • Grid List
  • Page:
    1. 1
  • Items 1 - 14 of 14
  • Page:
    1. 1
  1. 1-3/4'' H by 5-1/4'' W Embossed Carvings

    1-3/4'' H by 5-1/4'' W Embossed Carvings

    These quality birch carvings come ready to finish. Measures 1-3/4" High by 5-1/4" Wide.

    $5.49
  2. Jumbo Jaws for Oneway Stronghold Chuck

    Jumbo Jaws for Oneway Stronghold Chuck

    The Jumbo Jaws for the Oneway Stronghold Chuck (30589, sold separately) consist of plates machined from solid aluminum. Their combination of slots and tapped holes accept rubber grippers for holding an infinite number of round, oval or square shapes. Chucking capacities of the Stronghold Chuck with…

    $110.29
  3. Freud® 89-152 5-Pc. Round Over Router Bit Set - 1/2" Shank

    Freud® 89-152 5-Pc. Round Over Router Bit Set - 1/2" Shank

    …Radius (R): 3/8"* Overall Height: 2-5/8" Freud #: 34-126* Overall Diameter (A): 1-1/2"* Carbide Height (B): 3/4"* Shank (C): 1/2"* Radius (R): 1/2"* Overall Height: 2-3/4" Freud #: 34-128* Overall Diameter (A): 2"* Carbide Height (B): 1"* Shank (C): 1/2"* Radius (R): 3/4"* Overall Height: 2-7/8"

    $117.97
  4. Freud® 91-100 13 Piece Super Router Bit Set - 1/2" Shank

    Freud® 91-100 13 Piece Super Router Bit Set - 1/2" Shank

    …Bit (12-100) – 1/4" x 3/4"* Double Flute Straight Bit (12-116) – 1/2" x 1"* Double Flute Straight Bit (12-152) – 3/4" x 1"* Mortising Bit (16-110) – 1/2" x 1/2"* Round Nose Bit (18-114) – 1/4" x 3/8"* V-Groove Bit (20-108) – 3/4" x 1/2"* Dovetail Bit (22-112)…

    2 Review(s)
    $220.47
  5. Berenson Art Nouveau Pull, 4014-10VB-P

    Berenson Art Nouveau Pull, 4014-10VB-P

    * Finish: Venetian Bronze* Base Material: ZINC* Length: 7-15/16 Inches* Width: 1 Inch* Projection: 1-3/4 Inches* Center to Center Hole Spacing: 128mm* Base Diameter: 13/16 Inch* Machine Screw Thread Size: 8-32* Screw Length: 1 Inch* Pilot Hole Size: 3/16 Inch* Screws are included* Warranty: Lifetime

    $10.19
  6. Amerock Lattice Appliance Pull, BP55424-DBS

    Amerock Lattice Appliance Pull, BP55424-DBS

    …Base Material: Zinc* Length: 9 inch* Width: 1 1/6 inch* Projection: 2 inch* Center to Center Hole Spacing: 8 inch* Machine Screw Thread Size: 2 x #10 24 x 0.75"; 2 x #10 24 x 1"; 2 x #10 24 x 1.25"; 2 x #10 24 x 1.5"; 2 x #10 24 x 1.75"; 2 x Washers 3/4" OD* Screws are included* Warranty: Lifetime

    $111.29
  7. Tresco 20 LED Flexbar Kit

    Tresco 20 LED Flexbar Kit

    Peel and stick LED lights can be mounted almost anywhere! Each LED bar is just2-3/4"L x 3/4"W x 3/8"H, making them easy to install out of view for cove lighting,back lighting, accent lighting, edge lighting and more. LED bars are linked by electrical cord and are therefore very flexible to install…

    $157.49
  8. Top Knobs Door Pull, M833-18

    Top Knobs Door Pull, M833-18

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $206.99
  9. Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    …Height (B): 1"* Shank (C): 1/2"* Overall Height: 3-1/4" 1/4" Straight Router Bit:* Freud #: 12-100* Overall Diameter (A): 1/4"* Carbide Height (B): 3/4"* Shank (C): 1/2"* Overall Height: 2-3/8" Roman Ogee Router Bit:* Freud #: 38-104* Overall Diameter (A): 1-1/16"* Bearing Diameter: 3/8"* Carbide…

    $98.97
  10. Liberty Cathedral Style Raised Panel Cabinet Door

    Liberty Cathedral Style Raised Panel Cabinet Door

    …wood species.* Choose your edge profiles (most popular edges are chosen by default).* Enter the dimensions for each door or drawer front and add them to your cart. Please see the tech spec tab for tips for measuring and important information about this product. Please allow 3-4 weeks for delivery.

    From: $26.79
  11. Delaware Country Style Drawer Front

    Delaware Country Style Drawer Front

    …each door or drawer front and add them to your cart. Note: this decorative door style is available only in the profile shown. Custom edge options are not available. Please see the tech spec tab for tips for measuring and important information about this product. Please allow 3-4 weeks for delivery.

    From: $48.99
  12. Freud® Quadra-Cut™ Rounding Over Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Rounding Over Router Bits - 1/2" Shank

    Freud's Quadra-Cut™ round over bits add softness to cabinetry edges and table tops. Their exclusive 4-cutter Quadra-Cut design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Rounding over bit applications:…

    11 Review(s)
    From: $35.97
  13. Freud® Dovetail Router Bits - 1/4" Shank

    Freud® Dovetail Router Bits - 1/4" Shank

    …dovetail jigs, these bits produce smooth, intricate dovetail joints. Use the 1/2"H dovetail bits for drawer stock, and the 13/16"H dovetail bits for 3/4" thick carcases. Cut all composition materials, plywoods, hardwoods and softwoods. Use on CNC and other automatic routers as well as handheld and…

    From: $17.47
  14. Bench Dog® Router Table Plates

    Bench Dog® Router Table Plates

    These 1/4" thick aluminum plates all measure 8-1/4" x 11-3/4" - the exact size of the plate opening in Bench Dog's new ProTop and ProMaxRT router tables. Each plate has a different mounting-hole configuration so that virtually every router on the market will fit one of the four pre-drilled options.…

    7 Review(s)
    $64.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 14 of 14
  • Page:
    1. 1
Feedback X