4 Connector

  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
  1. 4'' Dia. Dust Collection Splice Connector

    4'' Dia. Dust Collection Splice Connector

    Splicer units are used to connect full sections of hose for longer runs or to utilize short sections. Ends have a 4" outside diameter.

    13 Review(s)
    $7.99 $5.99

    SAVE 25%

  2. Clear Flexible Dust Collection Hose - 4'' Diameter

    Clear Flexible Dust Collection Hose - 4'' Diameter

    …Dust Collection hose is ideal for any work shop. The extreme flexibility allows you to easily position the dust collection hose exactly where you want it. The clear medium weight PVC dust collection hose is wire reinforced and has an inside diameter of 4". Temperature resistance up to 160°F.

    79 Review(s)
    $5.29 From: $3.97

    SAVE 25%

  3. Rockler 4'' Fitting for PVC Sewer Pipe

    Rockler 4'' Fitting for PVC Sewer Pipe

    Connects Schedule 20 PVC to standard 4" dust collection fittings, such as elbow connectors. Requires silicone adhesive to seal (not included). Schedule 20 (PVC sewer pipe) is thin walled PVC pipe commonly found at home centers. Note regarding Schedule 20 PVC: The term "Schedule 20" merely refers to…

    6 Review(s)
    $7.99 $5.99

    SAVE 25%

  4. 4-Tube Ball T-Connector-Polished Brass

    4-Tube Ball T-Connector-Polished Brass

    Use for a 4-tube end connection. (Note: All ball fittings are supplied with self-drilling, self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* depth(D): 2-1/2"* length(L): 2-3/4"Measurements (for use with 2" inch tubing):* depth(D): 3-1/4"* length(L): 3-1/2"

    From: $26.99
  5. 4-Tube Ball T-Connector-Polished Stainless Steel

    4-Tube Ball T-Connector-Polished Stainless Steel

    Use for a 4-tube end connection. (Note: All ball fittings are supplied with self-drilling, self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* depth(D): 2-1/2"* length(L): 2-3/4"Measurements (for use with 2" inch tubing):* depth(D): 3-1/4"* length(L): 3-1/2"

    From: $35.49
  6. 4-Tube Ball Cross Connector-Polished Brass

    4-Tube Ball Cross Connector-Polished Brass

    An easy 4-way connection! (Note: All ball fittings are supplied with self-drilling, self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* depth(D): 2-1/2"* length(L): 3"Measurements (for use with 2" inch tubing):* depth(D): 3-1/4"* length(L): 3-1/2"

    From: $26.99
  7. 4-Tube Ball Cross Connector-Polished Stainless Steel

    4-Tube Ball Cross Connector-Polished Stainless Steel

    An easy 4-way connection! (Note: All ball fittings are supplied with self-drilling, self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* depth(D): 2-1/2"* length(L): 3"Measurements (for use with 2" inch tubing):* depth(D): 3-1/4"* length(L): 3-1/2"

    From: $37.49
  8. Rockler 4'' Hose Connector for PVC Sewer Pipe

    Rockler 4'' Hose Connector for PVC Sewer Pipe

    The large end of this connector fits into Schedule 20 PVC, while the smaller end attaches to any 4" dust hose.* The PVC connection requires silicone adhesive and the hose can be fixed with a metal clamp (neither are included).* Schedule 20 (PVC sewer pipe) is thin walled PVC pipe commonly found at…

    7 Review(s)
    $7.99 $5.99

    SAVE 25%

  9. 4'' T-Connector Dust Collection Fittings

    4'' T-Connector Dust Collection Fittings

    Allows you to design a mainline and branch line dust collection system. Primarily used when space or design limitations will not allow for Y-connectors. * 1/8" Wall Thickness * 4" Outside Diameter Ends

    3 Review(s)
    $9.99 $7.49

    SAVE 25%

  10. Heavy-Duty Universal Connector

    Heavy-Duty Universal Connector

    …is full 35mm (1-3/8") diameter for added strength. Heavy-duty universal connector is ideal for bed rail connectors, shelving, table and workbench legs, and more. Sold in packages of 4 (includes 4 cams, 4 connecting bolts and 4 threaded inserts). Cam installs in 35mm (1-3/8") dia. hole, 11/16" deep.…

    3 Review(s)
    From: $11.59
  11. Connector Bolts-Statuary Bronze

    Connector Bolts-Statuary Bronze

    Statuary Bronze or Black Oxide finished steel bolts for joining wood together. Ideal knock-down fitting for rapid assembly and disassembly of knock-down furniture.* Cap Nut shown is sold separately and fits all length bolts available below.* 1/4" - 20 thread with 4 mm hex drive* Sold in packs of 8

    23 Review(s)
    From: $4.49
  12. Connector Bolts-Black Oxide (8-Packs)

    Connector Bolts-Black Oxide (8-Packs)

    Statuary Bronze or Black Oxide finished steel bolts for joining wood together. Ideal knock-down fitting for rapid assembly and disassembly of knock-down furniture.* Cap Nut shown is sold separately and fits all length bolts available below.* Sold in packs of 8* Thread 1/4'' x 20 thd.* Head…

    23 Review(s)
    From: $4.49
  13. Cap Nuts for Connector Bolts

    Cap Nuts for Connector Bolts

    Cap nuts work with connector bolts for surface to surface application. Use these with 1/4", #20 thread connector bolts. * 11/16" long. * Can be used with 5 mm hex driver.* 8 per pack.* Bolt shown is not included with cap nut.

    3 Review(s)
    $5.39
  14. 48'' Aluminum Bar and Connector Kit for Sure-Foot® Bar Clamps

    48'' Aluminum Bar and Connector Kit for Sure-Foot® Bar Clamps

    Extend your clamps to unlimited lengths. Great for clamping large face frames for kitchen cabinet construction and other woodworking projects that require long clamps. Each kit contains one 4 ft. aluminum extension, one connector bar and four clevis pins.

    $35.98
  15. Elbow Connector Dust Collection Fittings

    Elbow Connector Dust Collection Fittings

    Elbows are necessary whenever ductwork changes direction, such as, from the dust collector to an overhead mainline and when connecting individual machines to branch lines.* Available for both 2-1/2" and 4" hose.

    11 Review(s)
    $4.99 From: $3.74

    SAVE 25%

  16. Panel Connectors

    Panel Connectors

    Perfect for joining bookcases and entertainment center sections. Designed for securing two panels of 3/4" thick stock. * Requires 5mm hole.* 8 per pack.

    5 Review(s)
    $4.99
  17. Speaker Panel Connectors

    Speaker Panel Connectors

    Use these handy speaker panel connectors for mounting speaker or other removable panels. Connector socket is press-fit into a hole drilled into the speaker panel; male connector attaches to the speaker cabinet with #3 or #4 screws (not supplied). Once installed, panels can be easily removed and…

    4 Review(s)
    $8.79
  18. Hafele High-Intensity LED Strip Lights - 4-7/8" Long Strip Light

    Hafele High-Intensity LED Strip Lights - 4-7/8" Long Strip Light

    …that feature 12 LEDs and require 0.8 watts. Connect up to six strips or 30" of lighting with Intermediate Connectors (37600, 37864 and 37767, sold separately) for larger lighting applications. Allow 2 weeks for delivery. Note: LED Strip Lights require a Transformer and Connector Lead for operation.

    From: $24.99
  19. Slimlite Fluorescent Lights

    Slimlite Fluorescent Lights

    …Lights may be connected directly or hooked together with pigtail connectors Power cord sold separately. Replacement bulbs available. The rocker switch #39129 requires the use of either a connecting cable or direct connector to link up additional lights. Maximum of 200 watts in a series. Please…

    5 Review(s)
    $67.99 $61.19

    SAVE 10%

  20. Rockler Quick-Release Corner Framing Clamp Kit

    Rockler Quick-Release Corner Framing Clamp Kit

    …is needed! With 45-1/2" max. opening capacity.This 20 pc. kit includes (8) 1/4" x 20 threaded rods,(4) Quick release threaded nuts, (4) Threaded connector nuts, and (4) Right angle corners. Technical Details:* Features quick-release threaded nuts on all four corners* Fast, easy adjustments* Corners…

    45 Review(s)
    $28.99 $19.99

    SAVE 31%

  21. 90 Degree Flush Elbow-Polished Brass

    90 Degree Flush Elbow-Polished Brass

    A smooth 90° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-1/4"* length(L): 2-1/4"Measurements (for use…

    From: $19.49
  22. 90 Degree Flush Elbow-Polished Stainless Steel

    90 Degree Flush Elbow-Polished Stainless Steel

    A smooth 90° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-1/4"* length(L): 2-1/4"Measurements (for use…

    From: $38.99
  23. Full Overlay Hinge Pack

    Full Overlay Hinge Pack

    …slotted screws and (4) corner connectors to fasten frames. No drilling is required! Frames are sold separately (GRP11050_1) and are available in Narrow Aluminum, Curved Aluminum and Wide Aluminum. Simply cut the frame ends with a 45 Degree miter, slide the corner connectors into the ends and slide…

    $23.29
  24. Half Overlay Hinge Pack

    Half Overlay Hinge Pack

    …slotted screws and (4) corner connectors to fasten frames. No drilling is required! Frames are sold separately (GRP11050_1) and are available in Narrow Aluminum, Curved Aluminum and Wide Aluminum. Simply cut the frame ends with a 45 Degree miter, slide the corner connectors into the ends and slide…

    $23.29
  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X