4 Jaw Turning Chuck

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
  1. 4-Jaw Turning Chuck

    4-Jaw Turning Chuck

    …adjustable jaws allow you to lock in square or odd-shaped stock on your lathe. Stepped jaws can also be reversed for added versatility. Technical Details:* Stepped jaws can also be reversed for added versatility.* Internal measurements: 5-1/4" max., 3/8" min.* 6" dia. chuck includes key.*…

    $106.99
  2. Fine Woodworking Turning Techniques and Projects, Book

    Fine Woodworking Turning Techniques and Projects, Book

    …Gouges* Four-Jaw Chucks* Sharpening Gouges* Turning for Non-Turners* Learn to Turn Spindles* Duplicate Spindles by Hand* Tips for Hollowing End Grain* Go Beyond the Lathe for Beautiful Vessels* Faceplate Turning is Fun* Secrets of Segmented Turning* Making Split Turnings* Fixing Turning Mistakes*…

    $21.95
  3. Rockler Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

    Rockler Stainless Steel Pizza Cutter Turning Kit, Chrome Finish

    …stock. DO NOT TURN ON THE DRILL PRESS. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock…

    22 Review(s)
    $19.99
  4. Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    Stainless Steel Pizza Cutter Turning Kit, Brass Finish

    …(#43469 Sold Separately) and chuck in your drill press. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock.…

    $19.99
  5. Oneway Stronghold Chuck

    Oneway Stronghold Chuck

    …2 Jaws). It is considerably heavier than the Talon Chuck (3.5 lbs) or Oneway Chuck (4.5 lbs) which makes it perfect for large turnings. Capacities of the Stronghold chuck with standard #2 Jaws (included):* External (compression): Min - 1-3/4" Max - 3-1/4"* Internal (expansion): Min - 2-3/8" Max - 4"

    3 Review(s)
    $274.99
  6. Spigot Jaws for Oneway Talon Chuck

    Spigot Jaws for Oneway Talon Chuck

    The Oneway Spigot Jaws are machined long and deep for a secure grip on narrow spindles, tenons and cups. Serrations on the outside provide excellent grip while expansion chucking. External (compression) chucking capacity: 1/4" to 1-5/8". Internal (expansion) chucking capacity: 1" to 2-3/8". Note:…

    $45.19
  7. #3 Jaws for Oneway Stronghold Chuck

    #3 Jaws for Oneway Stronghold Chuck

    The #3 Jaws for the beefy Oneway Stronghold Chuck (30589, sold separately) have the mass and size necessary for large bowls and vases. With their profiled jaws, they provide maximum gripping power with minimal damage to the piece. Chucking capacities of the Stronghold Chuck with #3 Jaws:* External…

    $57.79
  8. Jumbo Jaws for Oneway Stronghold Chuck

    Jumbo Jaws for Oneway Stronghold Chuck

    …shapes. Chucking capacities of the Stronghold Chuck with Jumbo Jaws:* External (compression): 2-3/4" minimum, 11" maximum* Internal (expansion): 4-3/4" minimum, 12" maximum Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT…

    $110.29
  9. Mega Jumbo Jaws for Oneway Stronghold Chuck

    Mega Jumbo Jaws for Oneway Stronghold Chuck

    …shapes. Chucking capacities of the Stronghold Chuck with Mega Jumbo Jaws:* External (compression): 1-3/4" minimum, 14" maximum* Internal (expansion): 4-3/4" minimum, 15" maximum Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are…

    $133.39
  10. Nova Powergrip Jaw Set

    Nova Powergrip Jaw Set

    …excellent durability. Powergrip Jaws are compatible with the SuperNova 2, and come standard with all Titan chucks. Note: This is the Jaw Set only. Needs to be used with the Titan and Supernova chuck sold separately * Ideal for large spigot and hollow form turning.* Jaws grip both in contraction and…

    $62.99
  11. Nova Soft Jaw Set

    Nova Soft Jaw Set

    …eliminate any errors that may have added up from mounting the jaws to the chuck, then to the spindle.* Maximum contact with workpiece. Near full diameter contact is achievable, since you can turn out to the exact diameter required.* Thick jaw body lets user profile any shape they wish, limited only…

    $18.99
  12. #3 Jaws for Oneway Scroll Chuck System

    #3 Jaws for Oneway Scroll Chuck System

    …profiled jaw design. Chucking capacities of the Oneway Scroll Chuck with #3 Jaws:* External (compression): 3-3/8" minimum, 4-3/4" maximum* Internal (expansion): 3-7/8" minimum, 5-3/8" maximum Chucking capacities of the Oneway Talon Chuck with #3 Jaws:* External (compression): 2-7/8" minimum, 4"

    $58.79
  13. #1 Jaws for Oneway Scroll Chuck System

    #1 Jaws for Oneway Scroll Chuck System

    Install these jaws on your Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) for turning small bowls, knobs, vases or spindles. Chucking capacities of the Oneway Scroll Chuck with #1 Jaws:* External (compression): 3/8" minimum, 2" maximum* Internal (expansion):…

    $52.49
  14. Nova Step Jaw Set

    Nova Step Jaw Set

    …Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models.* All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.* Nova chucks are…

    $52.49
  15. Oneway Scroll Chuck System

    Oneway Scroll Chuck System

    …to satisfy the woodturner's every need. Chucks were designed to meet most turning needs. Less time spent getting ready to turn and more time spent turning means better quality, and more finished projects. Large projects can be turned more safely, and turning can be done at the ends of long stock.…

    $195.29
  16. Jumbo Jaws for Oneway Scroll Chuck System

    Jumbo Jaws for Oneway Scroll Chuck System

    Jaws can hold an infinite number of round, oval or square shapes. Chucking capacities of the Oneway Scroll Chuck with Jumbo Jaws:* External (compression): 2-7/8" minimum, 11" maximum* Internal (expansion): 4-7/8" minimum, 12" maximum Chucking capacities of the Oneway Talon Chuck with Jumbo Jaws:*

    $115.49
  17. Oneway Talon Chuck System

    Oneway Talon Chuck System

    …additional jaws (listed with chucking capacities) are compatible with the Talon Chuck and can be purchased separately. #1 Jaws (22740)* External (compression): 3/8" minimum, 1-3/4" maximum* Internal (expansion): 7/8" minimum, 2-3/8" maximum #3 Jaws (22747)* External (compression): 2-7/8" minimum, 4"

    6 Review(s)
    $213.50
  18. Nova G3 Insert Chuck

    Nova G3 Insert Chuck

    …included chuck key.* Able to take all Nova accessory jaws. However, please note: the larger accessory jaws in the Nova line are not recommended for use on the Nova G3 Insert Chuck. For more information, see the offers for individual jaw sets. Features standard on all Nova chucks:* All Nova chucks

    $149.99
  19. Nova Mini Step Jaw Set

    Nova Mini Step Jaw Set

    …Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models.* All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.* Nova chucks are…

    $36.99
  20. Nova SuperNova 2 Insert Chuck

    Nova SuperNova 2 Insert Chuck

    …all-purpose geared chuck, suitable for a majority of users, and is packed with exciting, innovative features such as a fully sealed composite indexing backing plate and copper - infused jaw slides. Its patented gearing system delivers incredible gripping power. You'll find yourself turning longer,…

    $199.99
  21. Nova Chuck Spur Center

    Nova Chuck Spur Center

    …fits snugly into your Nova chuck jaws. Inward and outward creep is totally eliminated, as the shank is slotted to allow the chuck jaws to close over it. With wedge-shaped prongs at the center, and at each corner, you get five points of contact for a firm grip on your turning blank. * Allows you to…

    $19.99
  22. 16'' Longworth Style Chuck

    16'' Longworth Style Chuck

    …been a challenge - not with the Longworth Style Chuck. Simply rotatethe plates, tighten down the buttons, and you're ready to turn. * Eliminates the time and inconvenience of installing, adjusting and readjustingordinary rechucking jaws.* Capable of holding projects in compression or expansion…

    1 Review(s)
    $199.99
  23. 10'' Longworth Style Chuck

    10'' Longworth Style Chuck

    …been a challenge - not with the Longworth Style Chuck. Simply rotatethe plates, tighten down the buttons, and you're ready to turn. * Eliminates the time and inconvenience of installing, adjusting and readjustingordinary rechucking jaws.* Capable of holding projects in compression or expansion…

    1 Review(s)
    $139.99
  24. Mini Jumbo Jaws for Oneway Scroll Chuck System

    Mini Jumbo Jaws for Oneway Scroll Chuck System

    …sleeve for superior holding. Chucking capacities of the Oneway Scroll Chuck with Mini Jumbo Jaws:* External (compression): 2" minimum, 8-1/8" maximum* Internal (expansion): 4" minimum, 10-1/8" maximum Chucking capacities of the Oneway Talon Chuck with Mini Jumbo Jaws:* External (compression): 2"…

    $102.99
  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
Feedback X