4 Spring Clamps

  • Grid List
  • Page:
    1. 1
  • Items 1 - 18 of 18
  • Page:
    1. 1
  1. Rockler Dust Right® Floor Sweep System

    Rockler Dust Right® Floor Sweep System

    …tightest spots in the shop. All three components are made with durable ABS plastic that is built to last. For convenient storage, add a few 4" spring clamps (sold separately) and hang the entire system on the wall. Patent pending. Features:* Floor Nozzle contains built-in filter grate to keep…

    47 Review(s)
    $42.99 $32.24

    SAVE 25%

  2. 4" Spring Hose Clamp, Each

    4" Spring Hose Clamp, Each

    …collection system working at maximum suction with this 4" Spring Hose Clamp! Made of durable yellow chromate, the clamp has a 1-3/4" long bolt that allows you to tighten any connection, creating a tight seal and eliminating suction loss. Perfect for 4" dust collection hose fittings. Also available…

    3 Review(s)
    $0.99 $0.74

    SAVE 25%

  3. 4" Spring Hose Clamp, Pack of 5

    4" Spring Hose Clamp, Pack of 5

    …system working at maximum suction with these 4" Spring Hose Clamps! Made of durable yellow chromate, the clamps have a 1-3/4" long bolt that allows you to tighten any connection, creating a tight seal and eliminating suction loss. Perfect for 4" dust collection hose fittings. Pack of 5. Also…

    3 Review(s)
    $4.49 $3.37

    SAVE 25%

  4. Spring Miter Clamp Set

    Spring Miter Clamp Set

    Master all your clamping needs!* Perfect for picture frames and furniture repairs. * Kit contains spreader tool and four each of the following clamps: 2-9/16", 3-3/8", 4-3/16" and 4-15/16".* Also includes four suction feet for attachment to clip ends to prevent marring.

    5 Review(s)
    $34.99
  5. 10-Piece Woodworker's Spring Clamp Set

    10-Piece Woodworker's Spring Clamp Set

    …capacity clamps. Clamps are made from high-strength nylon with glass fiber for durability. Pivoting jaw pads accommodate a variety of angles. Features:* Large spring clamps are 9'' long with a 3'' jaw opening.* Medium spring clamps are 6'' long with a 2'' jaw opening.* Small spring clamps are 4''

    $16.99
  6. Trim Clip Miter Aid

    Trim Clip Miter Aid

    …challenge with no place to hook your tape-especially if the trim piece is long. Not so with the Miter Aid. Simply clip it on with the integral spring clamp, and the Miter Aid provides a slot for your tape measure, perfectly aligned with the inside corner of a 45° miter. No need for an assistant…

    $14.99
  7. Bosch MRP23EVS Plunge Router, 2.3 HP

    Bosch MRP23EVS Plunge Router, 2.3 HP

    …Range: 3" (76 mm) * Afterlock Adjustment Range: 5/8" (16 mm) * Subbase/Base Openings: 2" / 3-5/16"* Smooth Plunge Action - Accuracy, ease of use * Springed Plunge-Lock Lever - Ease of locking at desired depth * 2" Subbase Holes - Wide Base Openings Ability to use larger bits * Quick-Clamp System -…

    3 Review(s)
    $251.99
  8. Bosch MRF23EVS Fixed Base Router, 2.3 HP

    Bosch MRF23EVS Fixed Base Router, 2.3 HP

    The best Bosch fixed base router yet! The handle-mounted trigger is an industry firstyou'll relish every time you turn the router on. Another key feature is the excellentvisibility in the crucial bit area, illuminated with clean, bright LED lighting wheneverthe router is plugged in, and surrounded…

    $242.99
  9. Bosch MRC23EVSK Modular Router, 2.3 HP

    Bosch MRC23EVSK Modular Router, 2.3 HP

    …Range: 3" (76 mm) * Afterlock Adjustment Range: 5/8" (16 mm) * Subbase/Base Openings: 2" / 3-5/16"* Smooth Plunge Action - Accuracy, ease of use * Springed Plunge-Lock Lever - Ease of locking at desired depth * 2" Subbase Holes - Wide Base Openings Ability to use larger bits * Quick-Clamp System -…

    2 Review(s)
    $321.99
  10. Powermatic® Manual Dovetail Machine

    Powermatic® Manual Dovetail Machine

    …of pieces takes place manually by an eccentric clamp.* Four centerlines - 1", 1-1/2", 2" and 2-1/2" - create a custom appearance* Manual eccentric clamping will keep boards firm * Eccentric spindle collet for resharpened cutters * Spring loaded carriage makes for smooth, effortless dovetail…

    $3,934.99
  11. Festool RS 2 E Orbital Sander with New T-Loc Systainer

    Festool RS 2 E Orbital Sander with New T-Loc Systainer

    …speed and convenience and traditional clamp-on half-sheets for economy. Half-sheet paper changes are completely painless; the lever-actuated spring clamps lock open so you don't have to fumble with two things at once. You can even use the optional Hole Punch (70828) to form all 10 dust collection…

    $395.00
  12. Powermatic® Tilt Table Mortiser w/Stand

    Powermatic® Tilt Table Mortiser w/Stand

    …15-1/2"* Table Travel - Cross: 4"* Motor Power: 1 HP* Motor Voltage: 115/230 V* Prewired Voltage: 115 V* Motor Current: 11/5.5 A* Motor Phase: 1 Ph Standard Equipment * 1HP motor* Work stop for repeat cut* Depth and length stops* Enclosed stand with shelf* Gas spring assists head travel for smooth…

    1 Review(s)
    $1,274.99
  13. Kreg Jig® K5 Pocket Hole System

    Kreg Jig® K5 Pocket Hole System

    …portable use, and you have, quite simply, the most advanced Kreg Jig® yet * Front-mounted clamp handle makes clamping easy - no need to reach around the workpiece to close the clamp.* Ratcheting clamp mechanism adjusts without tools.* Quick-release pin holds drill block in place, and can't get…

    1 Review(s)
    $139.00
  14. Rockler Dust Right® Master System

    Rockler Dust Right® Master System

    …fits on any 4" dust port for easy direct collection, and the Floor Nozzle combines with the 36" Extension Wand to keep floors spotless. The system also includes a smaller Bench Nozzle, a StableGate™ blast gate with a wall-mounting bracket to keep the hose organized, plus four spring clips to…

    55 Review(s)
    $82.99 $62.24

    SAVE 25%

  15. Powermatic® Pneumatic Dovetail Machine

    Powermatic® Pneumatic Dovetail Machine

    …Four centerlines - 1", 1-1/2", 2" and 2-1/2" - create a custom appearance * Pneumatic clamping provides quick locking and unlocking of the work piece * Eccentric spindle collet for resharpened cutters * Spring loaded carriage makes for smooth, effortless dovetail cutting * Cutter height of 3/16"…

    $6,425.99
  16. Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    …indicator and built in scale.* Lightweight cast aluminum magnesium base.* Full-length channel beneath the guide rail accepts clamps for obstruction-free clamping. Clamps sold separately in the Festool FS/2 Guide Rail Accessory Kit (71458). Includes:* 75" guide rail* 8-1/4" 36-tooth carbide blade*…

    $725.00
  17. Bosch Colt PR20EVSPK Palm Router/Plunge Base Combo Kit

    Bosch Colt PR20EVSPK Palm Router/Plunge Base Combo Kit

    …scales in both inch and metric measurements.* Smooth plunge action.* Plunge lock release lever is conveniently located to allow maximum control, springs to locked position for ease of use.* 7-step adjustable depth stop turret plus microfine adjustment on depth rod for fast, accurate bit depth…

    $189.99
  18. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …Tenon-Lok™ cutting tool in your drill. 3. Before starting the drill, position the Tenon-Lok™ cutter all the way at the bottom of the mortise. 4. Start drilling at a low RPM and push hard enough to extend the cutter's spring-loaded dovetailing blades. Let the drill come to a complete stop…

    2 Review(s)
    $25.49
  • Grid List
  • Page:
    1. 1
  • Items 1 - 18 of 18
  • Page:
    1. 1
Feedback X