5 8 Miter Gauge

  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
  1. Incra Miter Gauge V27

    Incra Miter Gauge V27

    …any other tool in need of a better miter gauge. Technical Details:* Features exclusive AngleLock indexing system* Adjustable GlideLock miter bar with four expansion points adjust for zero side play* Twenty-seven laser cut pre-sets for perfect angles in increments over a full 120° range.*…

    $67.99
  2. iGaging Digital Miter Saw Gauge

    iGaging Digital Miter Saw Gauge

    When fine tuning miters, a little "error" can add up to a lot of "air" in your joints. But this easy-to-read digital gauge solves the problem by furnishing any miter saw with ultra-fine 0.05° resolution within +/- 0.001" accuracy. Unlike the gauge on your saw, when this gauge says 45°, it…

    1 Review(s)
    $52.99 $19.99

    SAVE 62%

  3. 45 Degree Miter Sled

    45 Degree Miter Sled

    Perfect miters - no adjustments! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90&deg angle, the miters will fit perfectly.* Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.* Through-slots in…

    85 Review(s)
    $25.99
  4. Incra® Miter 1000SE with Telescoping Fence

    Incra® Miter 1000SE with Telescoping Fence

    …possible! Special Edition miter gauge comes with sturdy telescoping fence and dual-arm Flip Shop Stop for accurate miter cuts on the table saw or router table.* Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive angle stops in increments over a full 180°…

    6 Review(s)
    $159.99
  5. Portable Cross Cut Sled

    Portable Cross Cut Sled

    …of the platform and fence.* MDF Fence face can be removed for replacement.* Nylon set screws in the miter bar are adjustable to eliminate slop.* Adjustable 90° stop.* Requires standard miter track (3/4" wide x 3/8" deep) For complete zero-clearance support on both sides of the blade, pair the…

    13 Review(s)
    $119.99
  6. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …Shooter Board Squaring Jig* Tenoning Jig Features:* (1) Large Build-It Panel* (1) Small Build-It Panel* (2) 18" T-Slot Panel Connector* (1) 18" Miter Slider* (1) Build-It Clamp* (1) pr. Build-It Brackets* (1) set of 8 Build-It Knobs* (1) 18" T-Track Regular* (1) 18" T-Track Plus* (5) Free Jig Plans

    2 Review(s)
    $146.99
  7. Large Toggle Clamp Foot

    Large Toggle Clamp Foot

    …Swivel-action 1-5/8" diameter foot works great for clamping angled stock. Available in two stud lengths. The extra-long 6" foot is ideal for use on a miter gauge or wherever extended reach is needed. Includes nuts and washers. Clamps sold separately. * Standard 5/16"-18 TPI stud size works with most…

    4 Review(s)
    $3.99
  8. Powermatic® 14'' Band Saw with 2-Piece Stand

    Powermatic® 14'' Band Saw with 2-Piece Stand

    …tensioning gauge settings indicated in "blade width" increments* 60-watt adjustable lamp built into the body provides direct light on blade and work piece while cutting (bulb not included)* Rigid one-piece welded stand requires no assembly* Comes with adjustable miter gauge, 3/8" band saw…

    2 Review(s)
    $1199.99
  9. Master Plate with Super Bar

    Master Plate with Super Bar

    …flatness for aligning your equipment. The Super Bar jig has an-onboard precision dial indicator that measures alignment as it slides in the miter gauge slot. This enables you to keep the saw blade parallel, align the fence, square tour protractor, and check runout on routers, drill presses, and…

    10 Review(s)
    From: $49.99
  10. Jet JTAS-12-DX, 12" XACTA SAW, 5HP 1PH

    Jet JTAS-12-DX, 12" XACTA SAW, 5HP 1PH

    …(In.) 8 * Maximum Width of Dado (In.) 13/16 * Table Type Cast Iron * Table Size (L x W) (In.) 31.5 x 24 * Table Size with Extension (L x W) (In.) 31.5 x 80 * Miter Gauge Type T-Slot with Stops * Dust Collection Minimum CFM Required (CFM) 350 * Dust Port Outside Diameter (In.) 4 * Motor Power (HP) 5

    $4112.49
  11. Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    …router table in place of the extension wing. Perfect for shops where space is tight, ProMAX includes a cast-iron top, Bench Dog's 28" ProFence, a miter gauge track that adjusts for a no-slop fit, and a solid aluminum insert plate that is pre-drilled to fit your specific router. If workspace is an…

    14 Review(s)
    $349.99
  12. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    …perfect circles as easily as making long, straight cuts* Magnetic blade storage drawer so you're ready for every cutting situation* Combination miter gauge and rip fence for angled cuts and long, straight cuts* Variable speed motor for controlled cuts* Adjustable safety guard covers the blade*…

    21 Review(s)
    $178.99
  13. Delta UNISAW Tablesaw, 3 HP, with 52" BIESEMEYER Fence System, Model 36-L352

    Delta UNISAW Tablesaw, 3 HP, with 52" BIESEMEYER Fence System, Model 36-L352

    …table to center of blade: 18-1/2 "* Table in Front of Saw at Max. Depth of Cut: 13-1/2 "* Max Width Of Dado: 1-1/8 "* Miter Gauge Groove: 3/8" x 3/4" * Chip Exhaust Opening: 4" & 5 "* Table Height: 35 "* Table Size: Size of Cast-Iron Top (with wings only): 31" x 40"; Size with BIESEMEYER Table, Wing…

    From: $3299.99
  14. Delta UNISAW Tablesaw, 3 HP, with 36" BIESEMEYER Fence System, Model 36-L336

    Delta UNISAW Tablesaw, 3 HP, with 36" BIESEMEYER Fence System, Model 36-L336

    …table to center of blade: 18-1/2 "* Table in Front of Saw at Max. Depth of Cut: 13-1/2 "* Max Width Of Dado: 1-1/8 "* Miter Gauge Groove: 3/8" x 3/4" * Chip Exhaust Opening: 4" & 5 "* Table Height: 35 "* Table Size: Size of Cast-Iron Top (with wings only): 31" x 40"; Size with BIESEMEYER Table, Wing…

    From: $3199.99
  15. SawStop Contractor Table Saw w/30'' Fence, CNS175-SFA30

    SawStop Contractor Table Saw w/30'' Fence, CNS175-SFA30

    …gap* Overall table flatness: 0.025"* Blade alignment with miter slot: 0.010" Maximum displacement* Deviation of miter gauge indexing stops from actual: ?0.25°* Alignment between spreader and blade: 0.010" Maximum difference* Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep* Dust…

    $1599.00
  16. SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52

    SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52

    …wing flatness: 0.025" maximum gap* Blade alignment with miter slot: 0.010" Maximum displacement* Deviation of miter gauge indexing stops from actual: ?0.25°* Alignment between spreader and blade: 0.010" Maximum difference* Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep* Dust…

    2 Review(s)
    $1899.00
  17. SawStop Contractor Table Saw w/36'' Fence, CNS175-TGP36

    SawStop Contractor Table Saw w/36'' Fence, CNS175-TGP36

    …wing flatness: 0.025" maximum gap* Blade alignment with miter slot: 0.010" Maximum displacement* Deviation of miter gauge indexing stops from actual: ?0.25°* Alignment between spreader and blade: 0.010" Maximum difference* Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep* Dust…

    3 Review(s)
    $1799.00
  18. Powermatic PM1500 Bandsaw, 3HP 1PH 230V

    Powermatic PM1500 Bandsaw, 3HP 1PH 230V

    …Maximum Saw Blade Width (In.) 1 * Table Height from Floor (In.) 40 * Table Tilt (Deg.) 10 Left, 45 Right * Minimum Saw Blade Width (In.) 1/8 * Miter Gauge Positive Stops 45, 90 * Dust Collection Minimum CFM Required (CFM) 600 * Dust Port Outside Diameter (In.) 4 * Motor Power (HP) 3 * Motor Phase 1…

    $2899.99
  19. Rockler High Pressure Laminate Router Table Top

    Rockler High Pressure Laminate Router Table Top

    …Table Tops have been newly redesigned with a dual-track miter slot in the table, and a whiter, brighter finish for improved visibility. The 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, such as the Incra gauge, while the adjacent universal T-track accepts stops,…

    1 Review(s)
    $99.99
  20. Kreg® Precision Router Table System With FREE Kreg® Precision Setup Bars

    Kreg® Precision Router Table System With FREE Kreg® Precision Setup Bars

    …Precision Setup Bars Features:* 3-in-1 bars act as a step gauge, depth gauge, and fence gauge* Fence gauge: makes positioning your fence quick and easy* Depth gauge: straddles your reducing rings for fast and easy bit height adjustments* Step gauge: Test the depth of your cut after each pass* Seven…

    1 Review(s)
    $540.99 $499.00
  21. Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    …redesigned with a dual-track miter slot in the table and an included dust port. Plus, these packages include our acclaimed Router Lift FX for above-table adjustments and bit changes! New 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both…

    $399.99
  22. Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    …with a dual-track miter slot in the table and an included dust port. Plus, these packages include a steel stand, and our acclaimed Router Lift FX for above-table adjustments and bit changes! New 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks…

    0 Review(s)
    $499.99
  23. Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

    …Steel Stand and the acclaimed Router Lift FX for effortless above-table adjustments and bit changes. 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs and more. Included aluminum Pro Fence…

    1 Review(s)
    $649.99
  24. Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

    …visibility, while the included Router Lift FX allows effortless above-table adjustments and bit changes. 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs and more. Included aluminum Pro Fence…

    $549.99
  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
Feedback X