600 Grit Sand Paper

  • Page:
    1. 1
  • Items 1 - 2 of 2
  • Page:
    1. 1
  • How-To Articles (2)
Product not found, but we found these articles.
  1. Fixing Chips and Scratches / Rockler How-to

    Fixing Chips and Scratches / Rockler How-to

    …will take several days or longer. Keep filling until the lacquer sits just slightly proud after it is cured and hard. Sand the area flush to the surrounding finish using 600 grit or finer sandpaper wrapped around a small, stiff block. "No matter which method you use, burn-in stick or doping in, the…

  2. Turned Multi-bit Screwdrivers Project / Rockler How-to

    Turned Multi-bit Screwdrivers Project / Rockler How-to

    …on your stock piece. Now it was time to finish-sand the handle and the cap (avoid sanding the cap's tenon). I set the speed to below 1,000 rpm and worked from 150- to 180- to 220-grit papers. After the sanding was done, I made a deep groove on the top of the cap with a thin parting tool, leaving…

  • Page:
    1. 1
  • Items 1 - 2 of 2
  • Page:
    1. 1
Feedback X