744

  • Items 1 - 24 of 32
  • Page:
    1. 1
    2. 2
  1. Festool Suction Adapter for HL 850 E

    Festool Suction Adapter for HL 850 E

    Replacement dust port adapter for HL 850 E Planer, enabling connection to Chip Collection Bag or to CT suction hose. The suction adapter can be attached to the left or the right side of the planer.

    $16.00
  2. Spanish Cedar Veneer

    Spanish Cedar Veneer

    Use this Spanish cedar veneer for your humidor. Technical Details:* Flexible veneer is laminated to a special 10 mil paper backing.* Sanded and ready to finish.* Can be left unfinished to line cigar boxes.* Veneer is 24" x 48".

    5 Review(s)
    $32.99
  3. Mortise Chisel Bit 3/8"

    Mortise Chisel Bit 3/8"

    The bit removes most of the material, and the chisel squares up the sides, allowing you to cut precise 3/8 mortises for mortise-and-tenon joints. Fits the Jet Benchtop Mortising Machine (81421, sold separately).

    $28.69
  4. Do-It-Yourself Pad Kit for Festool LS 130 Sander

    Do-It-Yourself Pad Kit for Festool LS 130 Sander

    For creating your own sanding pad to match custom profiles.

    $57.00
  5. Freud 97-260, 3-Piece Door Set

    Freud 97-260, 3-Piece Door Set

    Set contains Premier Adjustable Ogee Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door…

    $201.97
  6. Nova Step Jaw Set

    Nova Step Jaw Set

    These step jaws are designed to operate primarily in the contracting mode, gripping the base of footed bowls. The step sizes provide optimum gripping for three foot sizes with minimal crushing of the wood fibers. There is also an expanding dovetail so you have the option of gripping recessed bowls.…

    $52.49
  7. Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    The Nova Precision Midi Direct Thread Chuck is the smallest chuck in the Nova lineup—ideal for lathes with up to a 12" swing over the bed. Its small size minimizes the load on small spindles and bearings, yet is extremely accurate, and built to the same exacting standards as the SuperNova 2…

    $119.99
  8. Bosch T-Shank Fine Cut Jig Saw Blades

    Bosch T-Shank Fine Cut Jig Saw Blades

    Bosch T-Shank Fine Cut Jig Saw Blades are ideal for cutting sheet metal 10-16 gauge, ferrous and non-ferrous, metals 1/16'' to 1/8'' thick. The 17-24 TPI progressive tooth design provides for smooth cuts in various thicknesses.

    $11.49
  9. Do-It-Yourself Coffins Book

    Do-It-Yourself Coffins Book

    Basic casket building at its best. The author's simple approach teaches the tools and techniques needed to build strong and beautiful coffins for pets and people. By Dale Power w/ Jeffrey B. Synder. Color photos illustrate every step in creating three coffins for pets and three for people. Several…

    17 Review(s)
    $14.95
  10. Jet® Drum Sander 1.75HP w/Open Stand

    Jet® Drum Sander 1.75HP w/Open Stand

    This sander is a leader in it's class. It can sand up to 44" wide with greater accuracy that any thing else in it's class. Technical Details:* Our Exclusive SandSmart™ infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine…

    4 Review(s)
    $1784.99
  11. Festool Plug-it Cable, 4m (490656)

    Festool Plug-it Cable, 4m (490656)

    Replacement power cord for TS 55 and TS 75. Works on all Festool tools with Plug-it connect. Convenient 13' length.

    $44.00
  12. Festool MFT/3 Multi Functional Table

    Festool MFT/3 Multi Functional Table

    Festool has combined great new features with the best elements of previous MFT tables to deliver this versatile, state-of-the-art work station. At a carefully chosen working height of 35-1/2", it stands slightly taller than both the MFT 800 and 1080 for maximum comfort. It also offers a much larger…

    $645.00
  13. 45/90 Degree Layout Miter Gauge

    45/90 Degree Layout Miter Gauge

    Make layout easier — scribe perfect 45° and 90° cutlines at the same time! Ideal for picture frames, corner molding, and various box constructions, this precise gauge also works to prep saw blades or drill presses for angled jobs. A balanced, wide-face design adds remarkable stability,…

    5 Review(s)
    $27.99
  14. Side Handle SOV-SH for Sorby Sovereign Turning Tool System

    Side Handle SOV-SH for Sorby Sovereign Turning Tool System

    Add support and control to your Sorby Sovereign Handle with this similarly designed side handle. The threaded end simply screws into the threaded opening on the side of the Sovereign handle to maximize command of your tools. Extra control is especially useful for deep hollowing applications. Softex…

    $22.49
  15. Top Knobs Back to Back Passage  Door Pull, M829-18 pair

    Top Knobs Back to Back Passage Door Pull, M829-18 pair

    * Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality. * Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.…

    $338.19
  16. Festool Fusion-Tec MultiJetstream Longlife Soft Sanding Pad, 150mm (498987)

    Festool Fusion-Tec MultiJetstream Longlife Soft Sanding Pad, 150mm (498987)

    Offering truer running performance for smoother surfaces, less vibration, and longer life, Fusion-Tec pads are the latest from Festool in high-performance sanding accessories. This pad will replace all 6'' Multi-Jetstream Pads for the ETS 150/3, ETS 150/5 and RO 150 E. Fusion-Tec pads are fully…

    $44.00
  17. Berenson Plymouth Pull, 2797-298-P

    Berenson Plymouth Pull, 2797-298-P

    * Finish: Black Nickel* Base Material: STEEL* Length: 3-3/8 Inches* Width: 3/8 Inch* Projection: 1-3/16 Inches* Center to Center Hole Spacing: 3 Inches* Base Diameter: 3/8 Inch* Machine Screw Thread Size: 8-32* Screw Length: 1 Inch* Pilot Hole Size: 3/16 Inch* Screws are included* Warranty: Lifetime

    $3.99
  18. Amerock Allison Value Hardware Appliance Pull, BP55247-G10

    Amerock Allison Value Hardware Appliance Pull, BP55247-G10

    * Finish: Satin Nickel* Base Material: Zinc* Length: 12 2/3 inch* Width: 4/5 inch* Projection: 2 1/5 inch* Center to Center Hole Spacing: 12 inch* Machine Screw Thread Size: 2 x #10 24 x 0.75"; 2 x #10 24 x 1"; 2 x #10 24 x 1.25"; 2 x #10 24 x 1.5"; 2 x #10 24 x 1.75"; 2 x Washers 3/4" OD* Screws…

    $61.99
  19. Amerock Allison Value Hardware Knob, 14204WHT

    Amerock Allison Value Hardware Knob, 14204WHT

    * Finish: White* Base Material: Zinc* Projection: 15/16 inch* Knob Diameter: 1-1/4 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $2.49
  20. Amerock Allison Value Hardware Knob, BP1910-26

    Amerock Allison Value Hardware Knob, BP1910-26

    * Finish: Polished Chrome* Base Material: Zinc* Projection: 1-1/8 inch* Knob Diameter: 1-1/4 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $1.89
  21. Amerock Allison Value Hardware Pull, BP865CS-26

    Amerock Allison Value Hardware Pull, BP865CS-26

    * Finish: Polished Chrome* Base Material: Zinc* Length: 3-5/16 inch* Width: 3/8 inch* Projection: 1-1/4 inch* Center to Center Hole Spacing: 3 inch* Machine Screw Thread Size: 2 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $1.79
  22. Amerock Brass and Sterling Traditions Appliance Pull, BP1316-RB

    Amerock Brass and Sterling Traditions Appliance Pull, BP1316-RB

    * Finish: Roman Bronze* Base Material: Zinc* Length: 22 1/4 inch* Width: 1 1/7 inch* Projection: 2 1/4 inch* Center to Center Hole Spacing: 18 inch* Machine Screw Thread Size: 2 x #10 24 x 0.75"; 2 x #10 24 x 1"; 2 x #10 24 x 1.25"; 2 x #10 24 x 1.5"; 2 x #10 24 x 1.75"; 2 x Washers 3/4" OD* Screws…

    $144.69
  23. Amerock Conrad Knob, BP29203-G10

    Amerock Conrad Knob, BP29203-G10

    * Finish: Satin Nickel* Base Material: Zinc* Length: 38.9mm* Width: 12.8mm* Dia.: 1.531 inch* Projection: 26.5mm* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $3.99
  24. Amerock Expressions Knob, BP1475-PWT

    Amerock Expressions Knob, BP1475-PWT

    * Finish: Pewter* Base Material: Zinc* Projection: 1-1/4 inch* Knob Diameter: 1-3/8 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $6.29
  • Items 1 - 24 of 32
  • Page:
    1. 1
    2. 2
Feedback X