Adjustable

  • Items 1 - 24 of 1163
  • Page:
    1. 1
    2. 2
    3. 3
  1. Micro Adjuster for Router Table Fence

    Micro Adjuster for Router Table Fence

    …finely threaded micro adjuster screw. Included rare earth magnet attaches to the reversible screw and attracts the metal fence tab. This allows push and pull adjustment from either side of the fence. A key feature of the Micro Adjuster is that the user can make adjustments from either side of the…

    7 Review(s)
    $22.99
  2. Adjustable Corner Support

    Adjustable Corner Support

    Levels heavy cabinets. Includes a heavy gauge bracket with a 5/16" - 8mm threading screw for solid, steady support of heavy cabinets. Adjusts within a 2- 3/8" range. Bolt is 2-3/4" long. Price for single bolt.

    8 Review(s)
    $4.59
  3. Leveler Block

    Leveler Block

    These ready to install, pre-drilled blocks make leveling cabinets and bookcases a snap. The threaded nylon tipped glide is adjustable to a height of 2" either from the top, through a hole in the cabinet floor, or from below using an open end wrench. Leveling blocks are easy to install with glue and…

    5 Review(s)
    $6.99
  4. Combination Leg Equalizer

    Combination Leg Equalizer

    Adjusts vertically and swivels for uneven floors. Mounting screws are not included. Technical Details:* 1-7/8" long bolt with 3/8" - 16 threading.* Base diameter is 1-3/4". * Zinc plated steel.* Mounting screws are not included.* Set of 4.

    27 Review(s)
    $19.79
  5. FastCap Upper Hand Work Support, Extends from 28'' to 60''

    FastCap Upper Hand Work Support, Extends from 28'' to 60''

    Lifting heavy cabinets is hard enough, let alone holding them in place while you adjust for level and fasten to the wall. The telescoping Upper Hand Work Support is specifically designed for upper cabinets, making cabinet installation faster, easier, and safer! The Upper Hand extends from 28" to 60"…

    5 Review(s)
    $47.29
  6. S/S Glide, 3/8"-16 Threading L=36MM W=32MM (MKRS-32N3)

    S/S Glide, 3/8"-16 Threading L=36MM W=32MM (MKRS-32N3)

    Height adjustable and leveling glideMaterial: Body - 304 Stainless Steel Bottom - RubberFinish: Body - Satin Bottom - BlackStainless steel fasteners not available * Catalog Page (PDF format)

    $9.99
  7. Tablesaw CrossCut Sled

    Tablesaw CrossCut Sled

    …measures 2-7/8"H x 27"L.* MDF Fence face can be removed for replacement.* Spring-loaded ball bearings in the miter bar have adjustable tension to eliminate slop.* Adjustable 90° stop.* Requires standard miter track 3/4" w x 3/8" deep* Right edge of miter bar is 6" from right edge of un-cut…

    91 Review(s)
    $139.99
  8. Adjustable Leveler Leg

    Adjustable Leveler Leg

    These leveler legs adjust up to 2-3/16" to give you a range from 3-11/16" to 5-7/8". Toe kicks are removable--giving you easy access to plumbing and electrical fixtures! * Load rated at 400 lbs. per leg.* Foot measures 1-3/4" diameter.* Includes four plinth clips for attaching up to two toe kicks.*…

    10 Review(s)
    $17.49
  9. Self-Leveling Glides

    Self-Leveling Glides

    …versatility! Allows chairs to glide smoothly, and conforms to floor and furniture differences. The only glide on the market that automatically adjusts for angled or uneven legs! Works on indoor and outdoor wooden furniture. Allows chairs to glide smoothly, and conforms to floor and furniture…

    10 Review(s)
    $8.99
  10. Rockler Aluminum Miter Bar

    Rockler Aluminum Miter Bar

    …smooth-sliding action on table saws, router tables, workbenches and more! These solid aluminum bars have nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x 3/8" miter slot. Available individually in 18", 24" and 36" lengths.* Great for shop-made crosscut…

    12 Review(s)
    From: $19.99
  11. Black Adjustable Table Leg Set - Set of 4

    Black Adjustable Table Leg Set - Set of 4

    Set includes four 28" Long x 2" diameter black metal legs, four 4-1/2" x 4-1/2" steel mounting plates and #9 x 1" screws. Legs simply screw into included mounting plates. 220 lb. load capacity per leg. The adjustable foot allows 1'' adjustment 28'' to 29''.

    16 Review(s)
    $79.99
  12. Router Raizer

    Router Raizer

    …plate from 3/16" to 1/2" thick will do the trick! Height adjustments are made with a speed wrench that fits through a small hole drilled through your insert plate. When hand-held, adjustments are made from the top with a knurled adjustment knob that also works with the speed wrench. Router Raizer…

    15 Review(s)
    $104.99
  13. Rev-A-Shelf Filler Pullout Organizer w/Adjustable Shelves for Wall Cabinets (432-WF Series)-39" Height

    Rev-A-Shelf Filler Pullout Organizer w/Adjustable Shelves for Wall Cabinets (432-WF Series)-39" Height

    …to be installed in between cabinets* Wall filler pull-out with adjustable shelves* Full-extension ball-bearing slides* Fillers can only be installed with new cabinet construction* Limited Lifetime WarrantySpecifications:* All adjustable shelf wall filler pullout organizers measure 11-1/8" deep*…

    From: $109.99
  14. Rockler Picture-Hanging Keyhole Template

    Rockler Picture-Hanging Keyhole Template

    …be level. The two short slots are perfectly symmetrical so you can switch easily from left to right. The long slot increases your horizontal adjustability. Use with the 5/8" Short-Shank Guide Bushing (#38756 - Sold Separately), (specially designed for 1/4" template stock) and a 3/8" Hanging Slot…

    $11.59
  15. Deluxe Sewing Center Plan

    Deluxe Sewing Center Plan

    …- Sewing Machine Lift Mechanism: Designed to lift and lower a sewing machine. Mounts to underside of table top and back of cabinet. Release and latch mechanism lock the sewing machine height at different levels which may be adjusted. Mechanism can be adjusted to fit most free arm sewing machines.

    25 Review(s)
    $13.95
  16. Adjustable Molding Storage Rack

    Adjustable Molding Storage Rack

    Molding is seldom enough used that it shouldn't take up prime real estate in your shop. That's why we've sized our new Adjustable Molding Storage Rack so you can fit it above your shop cabinets-out of the way until it's time to trim out your project. The rack is also a nice size to install above…

    $21.99
  17. Crib Plan with Fixed Sides

    Crib Plan with Fixed Sides

    …headboards and between long spindles running the height of the crib or short spindles with a solid panel for privacy. Crib spring height is adjustable to four levels. Plan includes scaled-down templates for the curved pieces, cut lists and full instructions. Crib has fixed sides. Crib Hardware…

    3 Review(s)
    $11.59
  18. Kreg Universal Steel Stand

    Kreg Universal Steel Stand

    …The stand is made from a heavy gauge steel and is adjustable from 31" to 36" in height. Includes 4 leveling feet and assembly hardware. Technical Details:* Heavy-duty steel construction* 31" to 36" height adjustability* Stand Dimensions: 28" Wide x 20" Deep* 4-Stable…

    $149.00
  19. Salice® Push Frameless Self-Opening Overlay Door Hinge

    Salice® Push Frameless Self-Opening Overlay Door Hinge

    …hinges and a magnetic release device are state-of-the-art. The nickel-plated, self-lubricating steel hinges feature three-way cam-action adjustability for simple installation and precise door alignment. They install the same as any typical European concealed cup hinge, and are available to…

    $24.99
  20. Installing Kitchen Cabinets, Fine Homebuilding DVD

    Installing Kitchen Cabinets, Fine Homebuilding DVD

    …demonstrates all of the cabinet installation basics, from leveling and scribing cabinets for an accurate fit, to installing the countertops and adjusting doors and drawers. DVD format allows you to skip directly to the chapter you need and review it as often as you like. 48 minutes. Tom Law is a…

    $20.99
  21. High Chair Plan

    High Chair Plan

    …"removable" tray. adjusts to three positions. Made of cold rolled steel, zinc-plated. supplied with installation screws - four 5/8" x #6 flathead, Nickel Plated and 4-1/2" x #7 roundhead Nickel Plated. Supplied with a pair of latches and catches. tray has three positions for adjustments. High Chair…

    $10.99
  22. Small Toggle Clamp

    Small Toggle Clamp

    …of clamping pressure, it works great as a quick-action hold-down clamp for jigs or for keeping workpieces in place.* Bottom of rubber clamp foot adjusts from level with mounting surface to 7/16" below mounting surface.* Total length with arm extended: 2-5/16".* Length of arm only extended: 1-1/4"*…

    8 Review(s)
    $13.99
  23. Large Brass-Finish Sawtooth Picture Hangers, 4-Pack

    Large Brass-Finish Sawtooth Picture Hangers, 4-Pack

    A hassle-free hanging solution for pictures, paintings and other wall hangings. Sawtooth hangers allow easy adjustability for level, and a secure connection to the wall. Mounting nails included. Also available in Small Zinc Finish and Large Zinc Finish varieties. Technical Details:* Easy to level -…

    $1.29
  24. WEST SYSTEM&reg Epoxy-Filler

    WEST SYSTEM® Epoxy-Filler

    …surfaces: 462-550 sq. ft. (43-50 m2) Combined with 205 Fast, 206 Slow and 209 Extra-Slow Hardeners, the cure time of 105 can be fine-tuned and adjusted for a wide range of temperatures. For coating and roller applications, it can be combined with 207 Coating Hardener, which provides excellent…

    2 Review(s)
    From: $15.99
  • Items 1 - 24 of 1163
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X