Adjustable Jig

  • Items 1 - 24 of 136
  • Page:
    1. 1
    2. 2
    3. 3
  1. Leigh Super 24'' Dovetail Jig

    Leigh Super 24'' Dovetail Jig

    adjustable one-piece fingers are easily positioned for any joint pattern, and you are always guaranteed a half pin at each edge of the joint. Rout half-blind pin boards and tail boards at the same time. The finger assembly can also produce two sizes of box joints, 5/16" and 5/8". Adjustments for fit…

    1 Review(s)
    $479.00
  2. Rockler Drawer Pull JIG IT® Template and Center Punch

    Rockler Drawer Pull JIG IT® Template and Center Punch

    …investment in drawers and doors -- with the JIG IT® for Drawer Pulls and Knobs.* The marking template offers spacing for boring of 2-1/2 inches, 3 inches, 3-1/2 inches, 3-3/4 inches, 4 inches, and the European 96mm size.* The handle lets you adjust your setback from the edge anywhere up to 4-1/2…

    22 Review(s)
    $19.99
  3. Rockler Speed-Cope Crown Molding Jig

    Rockler Speed-Cope Crown Molding Jig

    Cut crown and base molding the easy way with this innovative jig. Speed-Cope™ lets you make tricky cope cuts with ease, for perfect molding faster. It adjusts to handle most molding up to 7-1/4" wide, 45° and 90° inside miters, flat miters, and base, chair, and panel moldings. Includes…

    3 Review(s)
    $149.99
  4. Leigh D4R Pro 24" Dovetail Jig

    Leigh D4R Pro 24" Dovetail Jig

    …1-1/4" thick - all with infinite adjustment of pin, tail width and spacing.* Adjustable guidefingers mean you are never compelled to dimension your work to suit the jig. Plan your project just as if you were going to cut the joints by hand, then set up the jig to fit the work. You are never limited…

    10 Review(s)
    $579.00
  5. JIG IT® Shelving Jig w/Self-Centering Bit

    JIG IT® Shelving Jig w/Self-Centering Bit

    …the handle on the appropriate edge of jig* Choose row depending on use: Face Frame or Frameless. Self-Centering Drill Bits: Self-centering bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves every time. No adjustments are necessary! Various bit sizes available…

    188 Review(s)
    $36.99
  6. Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …because we're including a pair of Universal Fence Clamps in this all-in-one package! The Clamp-It® Assembly Square replaces custom clamping jigs, acts as a third hand, and eliminates the need for long clamps. Used with the included Universal Fence Clamps, you can assemble any two pieces at…

    14 Review(s)
    $29.99
  7. Kreg Jig K4MS Master System

    Kreg Jig K4MS Master System

    …the dust collection shroud aids in chip expulsion for faster, cleaner drilling. Adjustable for 1/2" to 1-1/2" thick stock in 1/8" incremental settings. * 3 tools in 1 - benchtop jig, portable contractor jig, repair jig with addition of spacer blocks to the bottom of drill guide* 3-hole drill guide…

    23 Review(s)
    $139.00
  8. Rockler Adjustable Clamp-It® Assembly Square

    Rockler Adjustable Clamp-It® Assembly Square

    …screw. The Adjustable Clamp-It rotates from 45º to 315° and locks in place at the angles you'll need most!* Works with any joinery technique.* Easily assemble pedestal bases, staircases, decks, cabinets, drawers and more without custom clamping jigs!* Replaces custom clamping jigs, acts as…

    26 Review(s)
    $19.99
  9. Porter-Cable Door Hinge Template

    Porter-Cable Door Hinge Template

    Porter-Cable's unique door hinge routing template is highly adjustable, allowing you to rout hinge mortises for various door thicknesses and hinge lengths. Once adjusted, just tap the included double-headed nails through the guide holes to hold it in place, and rout out your hinge mortise with the…

    $37.99
  10. Dowelmax Jr. Doweling Jig

    Dowelmax Jr. Doweling Jig

    …joints using 3/8" dowels. Additionally, using simple shop made spacers, or precision machined spacers (2 included with the Dowelmax Jr), the jig can be adjusted to complete offset joints. The Jr. is fully compatible with, and upgradeable to the Dowelmax classic system. No measuring is required;…

    1 Review(s)
    $99.00
  11. Leigh Super 18'' Dovetail Jig

    Leigh Super 18'' Dovetail Jig

    adjustable one-piece fingers are easily positioned for any joint pattern, and you are always guaranteed a half pin at each edge of the joint.* Rout half-blind pin boards and tail boards at the same time.* The finger assembly can also produce two sizes of box joints, 5/16" and 5/8".* Adjustments for…

    3 Review(s)
    $389.00
  12. Tormek AngleMaster WM-200

    Tormek AngleMaster WM-200

    …ways: use it to set a jig to a grindstone so it grinds your tool at any desired edge angle from 10° to 75°, or use it to measure an existing edge angle on a tool. The AngleMaster is the easiest way to get an exact setting regardless of the degree of stone wear! Adjusts to any stone diameter…

    $27.00
  13. Micro Jig Microdial Tapering Jig

    Micro Jig Microdial Tapering Jig

    With Micro Jig's precision tapering jig, you can cut clean, crisp tapers with precise repeatability in increments as fine as 1/8 of a degree. Cut 2-, 4-, even 8-sided tapered legs as well as tapers for table tops and cabinet parts with a single jig! The Microdial adjustment system features index…

    $139.99
  14. Heavy-Duty Tenoning Jig

    Heavy-Duty Tenoning Jig

    …heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is controlled with a fine-threaded adjustment knob. Constructed of…

    68 Review(s)
    $117.99
  15. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    …60579) using your router. Technical Details* Cuts box joints from 1/4" to 13/16" wide* Micro-adjust feature allows adjustments of less than 1/64"* Secure-lock settings keep the jig in place while in use* Plastic backing strip helps eliminate chip-out Best Used With: Freud Box Joint Cutter Set…

    16 Review(s)
    $119.99
  16. Dowelmax Classic Doweling Jig

    Dowelmax Classic Doweling Jig

    Dowelmax Classic is a highly versatile and adjustable dowel joinery system that enables the creation of perfect joints that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The system creates…

    2 Review(s)
    $249.00
  17. Rockler Pro Shelf Drilling Jig

    Rockler Pro Shelf Drilling Jig

    Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows. * Guarantees each row is perfectly in line* Spaces each hole exactly 37mm from the edge of your stock* Jig is easy to set up and easy to adjust for multiple rows* Rows are spaced exactly…

    16 Review(s)
    $84.99
  18. Tormek® Small Knife Sharpening Jig

    Tormek® Small Knife Sharpening Jig

    …the handle.* The Tormek® Small Knife Sharpening Jig consists of a guide bar, a handle grip, and an adjustable clamp. The knife handle is fastened with a knob on the adjustable clamp.* The guide bar mounts in the jaws of the Tormek Knife Jig SVM-45 (60533, sold separately).* Once installed, you…

    $33.00
  19. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    Quick, accurate and versatile jig allows you to cut perfect-fitting mortise and tenons with a plunge router - requires only one setup to cut both pieces.* Ideal for cabinet, chair and table construction. Technical Details:* Fully adjustable for compound angle joints.* With reversible template to…

    $383.99
  20. Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    …safe working conditions. * Easily attaches to Rockler's dovetail jigs * Built-in 2-1/4" port fits most shop vac hoses (not included).* Sliding baffle directs the dust collection to where the dovetails are being cut. * Sweep brush adjusts to provide a complete seal for stock thicknesses of 1/2" up to…

    131 Review(s)
    $205.98
  21. Micro Jig ZeroPlay® Guide Bar

    Micro Jig ZeroPlay® Guide Bar

    Each Micro Jig ZeroPlay Guide Bar is composed of two interlocking plastic bars that adjust laterally to theexact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. The ZeroPlay Guide Bar is a "One-Touch…

    $15.99
  22. Leigh Super 12'' Dovetail Jig

    Leigh Super 12'' Dovetail Jig

    adjustable one-piece fingers are easily positioned for any joint pattern, and you are always guaranteed a half pin at each edge of the joint. Rout half-blind pin boards and tail boards at the same time. The finger assembly can also produce two sizes of box joints, 5/16" and 5/8". Adjustments for fit…

    3 Review(s)
    $269.00
  23. Oneway Wolverine Vari-Grind 2 Jig

    Oneway Wolverine Vari-Grind 2 Jig

    …your spindle and bowl gouges quickly, at any angle. Oneway's patented pivot point keeps your gouges moving in a true cylindrical pattern about the adjusting rod, creating a conical cutting edge, while the side-to-side motion of the tool is restrained so that the tool cannot slip off the side of the…

    $74.99
  24. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    …the bandsaw as a single-point fence for cutting curved slats in multiples.* Adjusts from 1-3/8" away from your miter track to 5-11/16" away from your miter track, enough for the thinnest rips* Measures 5-1/4"W x 8"L.* The jig is stationary, while the fence is moved for each cut.* Fits 3/4" W x 3/8"…

    104 Review(s)
    $26.99
  • Items 1 - 24 of 136
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X