Alignment

  • Items 1 - 24 of 203
  • Page:
    1. 1
    2. 2
    3. 3
  1. iGaging Digital Indicator

    iGaging Digital Indicator

    Calibrate with confidence! This handy device is ideal for tasks including fence alignment, table saw alignment and setting jointer depth. The indicator unit is affixed to a slide bar for on-the-fly adjustment. The slide bar sits flat along the table surface when the miter bar is positioned in a…

    3 Review(s)
    $74.99
  2. Table Leaf Aligners, 6 Pairs

    Table Leaf Aligners, 6 Pairs

    …together. Zinc-plated steel. Six pairs per pack. Technical Details:* Three pairs of table aligners recommended per joint/seam.* Each leaf aligner measures 1-9/16" x 1-1/2".* One package includes enough leaf aligners for two leaves.* Sturdy, zinc-plated metal plates tightly interlock for perfectly…

    1 Review(s)
    $4.99
  3. Align-N-Lock

    Align-N-Lock

    Dual purpose lever lock and striker hardware is perfect for aligning and locking both table leaves and table halves. Performs both functions simultaneously for quick and easy table setups. Technical Details* Yellow zinc plated* 2-3/8" x 2-15/16" overall* Requires 4" minimum lateral dimension for…

    27 Review(s)
    $4.19
  4. Table Pins-Choose type

    Table Pins-Choose type

    Align tops with Table Pins. Hold table leaves or halves in perfect alignment.* Brass pins are 5/16" diameter.* Wood and plastic pins measure 3/8" in diameter x 1-1/4" .* 8 per pack.

    17 Review(s)
    From: $2.79
  5. Master Plate with Super Bar

    Master Plate with Super Bar

    …provide a full 10" of near-perfect flatness for aligning your equipment. The Super Bar jig has an-onboard precision dial indicator that measures alignment as it slides in the miter gauge slot. This enables you to keep the saw blade parallel, align the fence, square tour protractor, and check runout…

    10 Review(s)
    From: $49.99
  6. Additional Alignment Plate for JIG IT® Multi-Tool Rail

    Additional Alignment Plate for JIG IT® Multi-Tool Rail

    Extra alignment plate for easy, accurate drilling of concealed-hinge cup holes on cabinet doors with the JIG IT® Multi-Tool Rail Master Pack (31126, sold separately).

    $37.79
  7. Big Gator V-Drill Guide - Standard

    Big Gator V-Drill Guide - Standard

    …the bottom of the guide allows for perpendicular alignment with all drill sizes on round parts or corners.* Bottom surface is precision ground to ensure stability and accurate perpendicular alignment on flat surfaces.* Round stock hole alignment marks on one side. * Prevents drill bit wander.*…

    2 Review(s)
    $24.99
  8. Nova Acruline 2MT Alignment System

    Nova Acruline 2MT Alignment System

    Use the Nova Acruline 2MT Alignment System to bring the centers of your Nova lathe back into perfect alignment. This is especially useful on lathes with a pivoting headstock, which should be realigned when the headstock is moved back to the inline position. The #2 morse tapers fit most brands, but…

    $18.99
  9. Wixey Saw Fence Digital Readout

    Wixey Saw Fence Digital Readout

    …unit with positional data. Digital readout displays measurements in decimal and fractional inches or millimeters. Mounting bracket, hardware and alignment gauge included. Additional Features:* Works with most popular brands and styles of fences including Biesemeyer, Powermatic, Jet, HTC, General,…

    8 Review(s)
    $109.99 $81.99

    SAVE 25%

  10. Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Get the tool alignment and adjustment gauge Fine Woodworking magazine calls "the best we've seen." From spindle and arbor runout to blade alignment, dado depth, router bit height and more, the Betterley UNA-GAUGE packs an amazing range of measurement capabilities into a single tool. Features:*…

    3 Review(s)
    $199.99
  11. FastCap Miller FastBlock, 2-Pack

    FastCap Miller FastBlock, 2-Pack

    …perfectly flat against the face of the cabinet. That's where the enhanced adjustability of the Miller FastBlock comes into play, allowing you to align the drawer guides perfectly parallel, perpendicular to the cabinet face, and also adjust for height. The Miller FastBlock replaces the commonly used…

    1 Review(s)
    $1.99
  12. 1-2-3 MicroGage

    1-2-3 MicroGage

    Bring machine shop accuracy to your workshop! Align, measure, calibrate and tunea variety of tools including routers, shapers, jointers, planers, drill presses, fences andmore. 1-2-3 block is made of hardened tool steel and ground to 0.0002" for ultraprecision. Dial indicator has 1" travel with…

    1 Review(s)
    $119.00
  13. 45° Lock Miter Router Bit

    45° Lock Miter Router Bit

    …Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased long grain gluing surface also helps…

    19 Review(s)
    $74.99
  14. KV8091 Slides & Full Overlay Pocket Door System-Pocket Door Slides

    KV8091 Slides & Full Overlay Pocket Door System-Pocket Door Slides

    …system that virtually eliminates door sag.* Precision steel ball bearings provide smooth and quiet operation.* Innovative indexing pin allows easy alignment and installation.* Mounts directly to cabinet side.* Minimum stile width of door is 2-1/2".* Side space requirements: min. 1-3/4" if doors are…

    4 Review(s)
    From: $93.49
  15. JIG IT® Drill Guide

    JIG IT® Drill Guide

    The exclusive JIG IT® Drill Guide can be used with a drill press or a hand drill to ensure perfectly aligned holes every time! Use with our Long Shank Forstner Bits (sold separately) to drill flat-bottomed holes.

    17 Review(s)
    $16.39
  16. Rockler 1/2'' Dowel Drilling Jig, While Supplies Last!

    Rockler 1/2'' Dowel Drilling Jig, While Supplies Last!

    An incredibly affordable doweling jig for those who want a quick joint without the fussy layout. Rockler Doweling Jigs are transparent, you need only set the two parts together, strike a line across the face of the joint and line up the jig. Made to last with a 3/16" acrylic faces and hardened steel…

    $15.49 $9.99

    SAVE 36%

  17. Self Centering Doweling Jig for Thick Timbers

    Self Centering Doweling Jig for Thick Timbers

    Great for large jobs such as swing sets and outdoor structures! Opens to a full 6" . Precisely aligned guides for five permanent holes including 1/4" , 5/16" , 3/8" , 7/16" , and 1/2".

    14 Review(s)
    $83.99
  18. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    …of heavy-duty 3/8" anodized aluminum with * All adjustments are made with easy-grip knobs.* Index lines on the guide block allow you to precisely align the jig with your reference marks.* Index lines on the ends of jig, allow you to line up mortise width-wise on the piece.* Handles stock thicknesses…

    32 Review(s)
    $137.99
  19. Brass Plated Table Lock

    Brass Plated Table Lock

    …is perfect for locking both table leaves and table halves, ensuring quick and easy table setups. Note: Mechanism does not align table. Best for tables that have alignment pins. Technical Details* Base plate measures 2-1/4" x 2-9/16"* 15/16" projection* Made of brass plated steel* Includes four…

    9 Review(s)
    $6.99
  20. Mag-Dro® Mitre Slot Base

    Mag-Dro® Mitre Slot Base

    Get precise measurements right where you need them with the help of the Mag-Dro® Mitre Slot Base! Connects quickly and easily to any caliper and fits in the 3/4" slot on your table saw, router, bandsaw, and more.* Fits most 6" calipers* Connects and disconnects to your caliper in seconds* Can be…

    4 Review(s)
    $8.99
  21. Jet® 15'' Planer w/Quick-Change Knives

    Jet® 15'' Planer w/Quick-Change Knives

    …a planer in the shop, but nobody likes to deal with the hassle of changing the knives. Enter the JET JWP-15DX Planer with quick change knives that align themselves, no adjustment required. Plus, each knife has two cutting edges to save you a little cash and a lot of frustration. This sweet machine…

    $1989.99
  22. Pock-it Hole Clamp® with Quick Release

    Pock-it Hole Clamp® with Quick Release

    …with a new Quick Release features a unique design that inserts a built-in adjustable pin into a 3/8" x 15° pocket hole, giving you perfect alignment every time. Now setups are even quicker and easier with the new quick-release slide button to snug up your fit, then use the ratcheting handle for…

    9 Review(s)
    $21.99
  23. Powermatic® 1 HP Drill Press, PM2800B

    Powermatic® 1 HP Drill Press, PM2800B

    …* 6" of quill travel with one revolution of the handle * Fence system adjustable for a perfect 90 degree relationship to the table, for rapid alignment of stock * Adjustable material stop makes repetitive actions accurate and quick * A digital RPM readout allows user to optimize the spindle speed…

    $1399.99
  24. Edge Stop for Festool LR 32 Guide Rail

    Edge Stop for Festool LR 32 Guide Rail

    For parallel alignment of LR 32 guide rail. Includes stop and sliding stop flag.

    $68.00
  • Items 1 - 24 of 203
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X