Allen

  • Items 1 - 24 of 170
  • Page:
    1. 1
    2. 2
    3. 3
  1. Standard / Metric Hex Key Set, While Supplies Last!

    Standard / Metric Hex Key Set, While Supplies Last!

    This 16-piece set includes all the essential hex key sizes. With separate rings for standard and metric, it makes finding the right key easy. All 16 wrenches are made from carbon steel. Metric keys are black. Standard keys are nickel plated. Limit 1 per Customer Standard key sizes:* 1/16", 5/64",…

    2 Review(s)
    $8.99
  2. Heavy Duty Corner Levelers

    Heavy Duty Corner Levelers

    …heavy duty corner levelers. Stability is assured! Simply mount under cabinet edge or in a kerf, then adjust with a height range of 1" using an Allen wrench (sold separately) through a hole in the cabinet floor. Technical Details:* Load capacity is 330 pounds each.* Thread size is 3/8", 16 tpi.*…

    3 Review(s)
    $21.99
  3. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments.

    22 Review(s)
    From: $19.99
  4. Clamp Tite Drill Stop

    Clamp Tite Drill Stop

    …bit. Because of this, it resists loosening and shifting, which can mar the drill bit and unexpectedly change drilling depth. Use a 7/64" Allen wrench to tighten and loosen the drill stop. * For 3/8" drill bits* Split collar design helps prevent slippage* Requires 7/64" Allen wrench (not included)

    2 Review(s)
    $4.79
  5. Allen Wrench

    Allen Wrench

    Needed accessory for adjusting the Heavy Duty Corner Levelers (31217, sold separately).

    $1.79
  6. Hex Bolts with Nuts-1/4 Hex Bolts

    Hex Bolts with Nuts-1/4 Hex Bolts

    These hex cap screws are used to fasten nearly all types of hard materials, especially useful in metal-to-metal connections, or where heavy-duty fastening is required. Commonly used with flat or lock washers. Corresponding nuts are included. Available in a range of sizes to suit your needs Technical…

    $1.29
  7. Hex Bolts with Nuts-5/16 Hex Bolts

    Hex Bolts with Nuts-5/16 Hex Bolts

    These hex cap screws are used to fasten nearly all types of hard materials, especially useful in metal-to-metal connections, or where heavy-duty fastening is required. Commonly used with flat or lock washers. Corresponding nuts are included. Available in a range of sizes to suit your needs Technical…

    $1.29
  8. Zinc Coated Hex Nuts

    Zinc Coated Hex Nuts

    Bright, durable zinc coating will keep these finished hex nuts looking clean and corrosion-free for years to come. Choose from three sizes, each in packs of eight.

    From: $0.49
  9. Hex Head Power Bit

    Hex Head Power Bit

    Use this 4 mm Hex Head Power Bit to install connector bolts and cap nuts. Recommended for use with a magnetic drive bit holder. Made from hardened tool steel for maximum durability.What's in the Box One 4 mm hex head power bit. Best Used With Magnetic Bit Holder for Hex Drives. Available below (Item…

    $1.59
  10. Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters

    Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters

    Precision-ground edges and flute design cut precise edges that don't require sanding! Suitable for both soft and hardwoods. Plug diameter is slightly tapered from one size to .025" oversized. Available in 1/4", 3/8" and 1/2" plug sizes. With 1/4" hex shank on all cutters to fit quick-change chuck…

    18 Review(s)
    From: $14.99
  11. Hex Drive Threaded Inserts-Choose size

    Hex Drive Threaded Inserts-Choose size

    Use for a tight grip! Larger teeth give increased holding strength, ideal for end grain and particle board applications. Made of die cast zinc alloy. Has a self tapping harpoon thread. Thread listed is the size of the internal thread size. Sold in pack of 8.

    16 Review(s)
    $6.99
  12. 16-Pc. Hex Key and Precision Screwdriver Set

    16-Pc. Hex Key and Precision Screwdriver Set

    A great all-around set of hex-keys and screwdrivers for repairing electronics,bikes, appliances, and more around the home, garage, and workshop. Includesthree folding multi-tools with heavy-duty, anodized aluminum handles,and chrome-finished blades that resist rust and corrosion. Pen-style…

    1 Review(s)
    $19.99
  13. Magnetic Bit Holder for Hex Drives

    Magnetic Bit Holder for Hex Drives

    Hex Shank. Magnetizes drive bits.

    1 Review(s)
    $9.49
  14. 1/4'' Hex x 3'' Magnetic Bit Holder

    1/4'' Hex x 3'' Magnetic Bit Holder

    You'll never drop a screw again with the 1/4" Hex x 3" Magnetic Bit Holder from Lutz®! A strong magnet holds the bit inside the socket while you work. Made from heat-treated S-2 tool steel for durability. Technical Details:* Strong magnet holds the bit inside the socket while you work* Lutz®…

    $3.29
  15. Festool 1'' Impact Hex Bit, Phillips #2, 5-Pack

    Festool 1'' Impact Hex Bit, Phillips #2, 5-Pack

    These Phillips hex bits are specially heat-treated for durability when usedwith impact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with…

    $15.00
  16. Festool 1'' Impact Hex Bit, Torx #40, 5-Pack

    Festool 1'' Impact Hex Bit, Torx #40, 5-Pack

    These Torx hex bits are specially heat-treated for durability when used withimpact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with…

    $16.00
  17. Festool 1'' Impact Hex Bit, Torx #30, 5-Pack

    Festool 1'' Impact Hex Bit, Torx #30, 5-Pack

    These Torx hex bits are specially heat-treated for durability when used withimpact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with…

    $16.00
  18. Festool 1'' Impact Hex Bit, Torx #20, 5-Pack

    Festool 1'' Impact Hex Bit, Torx #20, 5-Pack

    These Torx hex bits are specially heat-treated for durability when used withimpact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with…

    $16.00
  19. Festool 1'' Impact Hex Bit, Phillips #3, 5-Pack

    Festool 1'' Impact Hex Bit, Phillips #3, 5-Pack

    These Phillips hex bits are specially heat-treated for durability when usedwith impact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with…

    $15.00
  20. Festool 1'' Impact Hex Bit, Torx #25, 5-Pack

    Festool 1'' Impact Hex Bit, Torx #25, 5-Pack

    These Torx hex bits are specially heat-treated for durability when used withimpact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with…

    $16.00
  21. Kreg Quick-Change Pocket Hole Bit Adaper

    Kreg Quick-Change Pocket Hole Bit Adaper

    This solid, forged-steel adapter adds quick-change compatibility to Kreg's standardround-shanked 3/8" diameter pocket-hole bits. Two Allen screws secure the bit,while a hex-shaped shank allows for rapid transitions in quick-change chucks. Additional features:* Durable, one-piece forged steel…

    $7.99
  22. Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks

    …Insty-Driver. Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments.

    22 Review(s)
    $40.49
  23. Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    Rockler/Insty-Drive Tapered Drill Bits and Countersinks-Replacement Tapered Drill Bits

    …countersink set shown includes 3 countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for countersink depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments. OPTIONAL ACCESSORIES :

    22 Review(s)
    From: $7.99
  24. Kreg Quick Change Kit

    Kreg Quick Change Kit

    …need: an innovative Quick-Change Chuck, a 6" long #2 Square Driver, and thenew 3/8" Hex-Shank Pocket Hole Drill Bit (with depth collar and allen wrench). Additional features:* All new 3/8" Hex-Shank Step Drill Bit snaps directly into the Quick Change Chuck– no need for a bit adaptor.*…

    4 Review(s)
    $29.39
  • Items 1 - 24 of 170
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X