Angle Guide

  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
  1. Tormek® Small Knife Sharpening Jig

    Tormek® Small Knife Sharpening Jig

    …The exact edge angle is set by turning the adjustable stop or using the micro-adjust on the universal support.* Patent pending.* Note: Some knives are difficult to mount in line with the guide bar. Knives can also be sharpened with asymmetrical bevels. In these cases, and if the angle is not correct…

    $32.00
  2. Angle Unit for Festool Guide Rails

    Angle Unit for Festool Guide Rails

    Quickly and accurately set angles for cutting or routing with the Festool FS guide rails. Ideal for making angled, mitered, or even compound cuts in sheet goods. Guide rail sold separately.

    $95.00
  3. INCRA Precision Protractor

    INCRA Precision Protractor

    We've reinvented the protractor by putting micro-fine guide holes at every 45o, 30o, 22.5o, 5o, 1o and 0.5o interval to plot any angle with ease and absolute accuracy.

    1 Review(s)
    $32.99 $19.99

    SAVE 39%

  4. Blue Right™ Woodworker's Protractor

    Blue Right™ Woodworker's Protractor

    …sites. Features a removable fence that lets you set the protractor flush against your work piece for accurate measuring, marking and projecting angles, or remove the fence and use it as a standard protractor. Convenient slots let you mark center points, and the flat edge has a center-finding rule.…

    $24.99
  5. Micro Jig Microdial Tapering Jig

    Micro Jig Microdial Tapering Jig

    …Microdial adjustment system features index holes to ensure a positive angle stop before you lock in your setting with the knobs. In addition, the tapering jig features the Memorylock system, which maintains two independent angle stops, and lets you easily toggle between the two. Two separate scales…

    $139.99
  6. Logan 350-1 Compact Elite Mat Cutter

    Logan 350-1 Compact Elite Mat Cutter

    …hooks onto edge of guide rail for precise cutting.* Adjustable depth pivoting straight cutter can cut standard thickness mat board and 3/16" foam board.* Removable 20" measuring bar for straight cutting.* Squaring bar and two guide rail stops ensure precise right angles.* Bevel head works with…

    $179.99
  7. Festool MFT/3 Multi Functional Table

    Festool MFT/3 Multi Functional Table

    …variety of clamping configurations, while a highly accurate 180° Angle Fence and integrated Guide Rail System combine to create an absolutely precise cross-cutting setup when used with Festool's TS Series saws. The Guide Rail also adjusts to allow cuts up to 3" deep and 27" wide-an impossible…

    $645.00
  8. Work Sharp Knife and Tool Sharpener, WSKTS

    Work Sharp Knife and Tool Sharpener, WSKTS

    …sharpening module, kitchen knife guide with 40° total angle, outdoor knife guide with 50° total angle and 65° single bevel scissor guide, abrasive belt kit that contains a P80 coarse belt, P220 medium belt and 6000 fine honing belt, plus a quick start guide and instructional DVD.…

    15 Review(s)
    $69.95
  9. Bessey Angle Clamp

    Bessey Angle Clamp

    …joint is 1-1/8". For added convenience use the Rockler Universal Fence Clamps to secure the Bessey Angle Clamp to a table or workbench. Technical Details * Galvanized Acme thread guide spindle * Non-marring jaw surfaces * Jaw body made of plastic coated die-cast metal * Maximum opening (unequal…

    4 Review(s)
    $42.99 $19.99

    SAVE 54%

  10. Festool Guide Rails

    Festool Guide Rails

    …cuts! With the correct Festool Guide Stop, they can work with Festool routers, plunge cut saws, jig saws and more. Technical Details:* Hard-anodized surface* Soft, non-slip coating* Hard rubber splinter guard* Mounting slot for: FSW angle unit, Connector for Guide Rails (482107), FSZ clamps, FS-AW…

    From: $80.00
  11. MagSwitch Resaw Guide Attachment

    MagSwitch Resaw Guide Attachment

    …Resaw Guide tool attachment is for use with the Magswitch Workholding System (sold separately, 38007). Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Angled

    $25.49
  12. Ceramic Guide Blocks for Bandsaws, 4-Pack

    Ceramic Guide Blocks for Bandsaws, 4-Pack

    …You'll get guide block seat tolerance of +/-.005. Outlasts every other guideblock on the market! These blocks will only fit 14" Delta or Jet Band-Saws.* #26687 - Guide Blocks for 14" Delta Band Saws: Includes three blocks that are 1/2" x 1/2" x 7/8" and one angled block that is…

    1 Review(s)
    $24.69
  13. Festool Guide Rail for LR 32 Hole Drilling System

    Festool Guide Rail for LR 32 Hole Drilling System

    …surface.* Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action.* Integrated splinterguard aligns perfectly to cut line, saving setup time and serving as protection against tearout.* Mounting slot for: FSW angle unit, Connector for Guide Rails (482107),…

    $315.00
  14. Festool Guide Rail Accessory Kit with New T-Loc Systainer

    Festool Guide Rail Accessory Kit with New T-Loc Systainer

    …Independent Partner Resellers. A complete kit to maximize the value of your FS guide rails when used with your Festool plunge saw or router. Quickly set angles for both mitered and compound cuts using the Angle Unit. Make accurate repeat cuts using the Limit Stop. Work more efficiently by attaching…

    1 Review(s)
    $210.00
  15. Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    …function extends angle cutting to -1° to 47° with positive stops at 0° and 45°.* Improved dust channel design further enhances extraction efficiency, so you can work right in the customer's space, with less clean-up. Other features: * When used with Festool guide rails, you can…

    1 Review(s)
    $615.00
  16. Push Block with Angled Handle

    Push Block with Angled Handle

    A more comfortable way to guide stock through your saw! The ergonomic handle is pitched at just the right angle for a safe, natural grip throughout the cut. And with the rubber friction pad maintaining a firm hold, you won't have to worry about kickback or slip-ups. Made from durable, high impact…

    4 Review(s)
    $7.59
  17. Work Sharp® Guided Field Sharpener

    Work Sharp® Guided Field Sharpener

    …three settings: coarse, fine and a dedicated groove specifically for sharpening fish hooks.* The 20° sharpening guides and 25° honing guides create consistent blade edge angles with speed, ease and repeatability.* Strong rare earth magnets secure the easily interchangeable diamond plates and…

    $29.99
  18. Leigh Louver Door Guides

    Leigh Louver Door Guides

    …can use your FMT to make precise louver doors with standard 1/4" x 1-1/4" louvers at a 45° angle. Matching tenons can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortise. Sold in left and right matching pairs. Note: New FMT guides not exactly as shown.

    $51.99
  19. Three Stone Oil Sharpening System

    Three Stone Oil Sharpening System

    Includes three 6" stones (1 Hard Arkansas: fine, 1 soft Arkansas: medium, and 1 Aluminum Oxide: Coarse), 1 ounce premium honing oil and sharpening angle guide.

    8 Review(s)
    $41.99
  20. 4'' Mini Try Square

    4'' Mini Try Square

    The must-have tool for laying out precise 90° angles, checking internal angles, marking stock or using as a guide for mortising.* Rosewood handle with 4-3/8" hardened steel blade.* Triple rivets ensure constant accuracy.

    1 Review(s)
    $21.49
  21. Nova Finger Grind Jig

    Nova Finger Grind Jig

    …precise grinding with no transition marks.* Chisel clamp accepts up to 1" chisels.* Extruded aluminum for strength and light weight.* Set guide angles let you dial in your favorite grind easily.* Quickly retouch the bevel edge with the finger grind bracket.* Ability to replicate tool bevels…

    $84.99
  22. Tormek AngleMaster WM-200

    Tormek AngleMaster WM-200

    …edge angles quickly and easily for accurate knife and tool sharpening with the Tormek AngleMaster WM-200! Works easily in two ways: use it to set a jig to a grindstone so it grinds your tool at any desired edge angle from 10° to 75°, or use it to measure an existing edge angle on a tool.…

    $26.00
  23. Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …Clamp-It® to a work surface using the Universal Fence Clamps, and it becomes a right angle fixture for bench assembly. Compact, lightweight clamps secure the Clamp-It® Square for tight 90 degree angle joints * Clamp-It® features a series of 3/8" holes to accommodate the Universal Fence…

    14 Review(s)
    $29.99
  24. Assorted Accessories for Festool OF 1400 EQ

    Assorted Accessories for Festool OF 1400 EQ

    Assorted Accessories for Festool® OF 1400 EQ Router

    From: $18.00
  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X