Angle Square

  • Items 1 - 24 of 67
  • Page:
    1. 1
    2. 2
    3. 3
  1. 10'' Sliding T-Bevel Square

    10'' Sliding T-Bevel Square

    Metal blade pivots and can be locked at any angle.

    $20.99
  2. Digital Sliding T-Bevel Gauge

    Digital Sliding T-Bevel Gauge

    Take the guesswork out of angle measurement and duplication with this 2-in-1 Digital Sliding T-Bevel and Protractor! Features a large digital angle readout that gives you precise 360° measurements with an accuracy to 0.3° and .05° resolution and holds them while you transfer to stock.…

    5 Review(s)
    $36.99
  3. Clamp-It® Assembly Square

    Clamp-It® Assembly Square

    …fixed head with a comfortable ergonomic handle and a moveable tailpiece. Sold Separately Find the right Clamp-It® for every project! Also available from Rockler: * Clamp-It® Mini Assembly Square* Clamp-It® Adjustable Assembly Square* Clamp-It® Assembly Square w/Universal Fence Clamps

    109 Review(s)
    $12.99
  4. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …plus the plans for 5 useful workshop jigs. Warm up with the disc sander jig or the squaring jig for fast results. Then try the coping sled for clean, square rail-ends, throw the crosscut sled together for angled cuts on the table saw or build the tenoning jig for crisp tenons in almost no time.…

    2 Review(s)
    $146.99
  5. Woodworker's Adjustable Triangle

    Woodworker's Adjustable Triangle

    …Easy-to-read angle lines* Durable acrylic construction is 1/4" thick for long long-lasting durability at home or on the job site.* Converts easily to a drafting triangle by removing the fence* With the fence attached, square the drafting triangle to the edge of your workpiece for accurate angle

    2 Review(s)
    $39.99
  6. iGaging 12'' Center Rule & Angle Gauge

    iGaging 12'' Center Rule & Angle Gauge

    …The 12" Center Rule/Angle Gauge is made of hardened stainless steel.* Clear 1/2 degree marks and 1/4 degree dots on the angle gauge for easy reading.* All corners are square, so the rule can be used for drawing parallel and square lines, and for squaring saw blades.* Range: 0-12" / 0-50 degrees

    $19.99
  7. 45/90 Degree Stainless Steel Miter Gauge

    45/90 Degree Stainless Steel Miter Gauge

    …blade angles; check corners for square — the possibilities are endless. A sturdy base allows it to stand upright. Interior windows add marking versatility. A low-profile design lets you stow it easily in your shop apron. Use this versatile gauge to set up miters, scribe parallel lines, square

    4 Review(s)
    $27.99
  8. Tormek Square Edge Jig SE-76

    Tormek Square Edge Jig SE-76

    …and plane irons in place while sharpening with the Tormek Square Edge Jig (SE-76)! Mounts on Tormek's universal support to hold tools in place, and the jig automatically lines up chisels and plane irons for correct grinding angle. Lower clamp has a ridge to fit shorter tools. Two safety stops…

    2 Review(s)
    $58.00
  9. Laguna Tools Platinum Series Universal Sliding Table System

    Laguna Tools Platinum Series Universal Sliding Table System

    Do you need to square sheet stock but don't have the space for a panel saw? Laguna Tools solves that problem with the Platinum Series Universal Sliding Table, a sliding table attachment that converts virtually any cabinet style table sawto give you the cutting capacity of a small panel saw!*…

    $695.00
  10. Bessey Angle Clamp

    Bessey Angle Clamp

    Use the Bessey right angle clamp for clamping square corners at a precise 90 degrees. The right angle clamp is ideal for holding parts to be screwed or glued together. The clamp's maximum opening is 7/8" on one side and 2-1/2" on the other side for members of different thicknesses and 1-3/4" for…

    4 Review(s)
    $42.99 $19.99

    SAVE 54%

  11. Starrett Protractor Angle Finder

    Starrett Protractor Angle Finder

    Takes error-prone calculations out of the process of miter cuts, providing a perfect miter every time.* With two scales.* Aluminum.

    $89.99
  12. Adjustable Aluminum Angle Finder/Protractor

    Adjustable Aluminum Angle Finder/Protractor

    Accurately measure angles from 15° to 170° to ensure proper layout for cuts, corners, joints and more. Protractor is anchored to pivoting 20" and 9" ruler arms, and the angle indicator moves along the protractor as ruler arms are opened and closed. Ruler arms feature standard measurement…

    $31.99
  13. iGaging 8" Digital Angle Protractor (35-408)

    iGaging 8" Digital Angle Protractor (35-408)

    Take steel blade angle measurement to a new digital degree! Mark miters, check 90°corners and more. Two overlapping steel blades feature inch and millimeter markings to1/16" and 0.1mm. Digital protractor device measures the angle between the blades asthey are slid apart. Measures entire 360°…

    6 Review(s)
    $41.99
  14. Starrett® 6'' Combination Square with Square Head

    Starrett® 6'' Combination Square with Square Head

    The combination square is one of the world's most practical and versatile tool inventions - the basic tool for every builder and craftsman. Features try/miter gauge, depth gauge, height gauge and marking gauge - all in one! With reversible lock bolt, scriber, spirit level and machine-divided blade…

    7 Review(s)
    $92.99
  15. 3' Steel Center Square

    3' Steel Center Square

    Quickly and easily locate the center of round and square stock up to 6" in diameter.* The 3mm thick beveled blade is made from spring steel and is hardened and ground for extended life.* Solid steel right angle stock is 3/8" thick.* Comes in a convenient snap-close vinyl storage case.

    8 Review(s)
    $24.99
  16. Adjustable Clamp-It® Assembly Square

    Adjustable Clamp-It® Assembly Square

    …for tightening and loosening, while interlocking teeth securely set angle.* Assembles in seconds. Find the right Clamp-It® for every project! Also available from Rockler:* Clamp-It® Assembly Square* Clamp-It® Mini Assembly Square* Clamp-It® Assembly Square w/Universal Fence Clamps

    26 Review(s)
    $19.99
  17. 4'' Mini Try Square

    4'' Mini Try Square

    The must-have tool for laying out precise 90° angles, checking internal angles, marking stock or using as a guide for mortising.* Rosewood handle with 4-3/8" hardened steel blade.* Triple rivets ensure constant accuracy.

    1 Review(s)
    $21.49
  18. Stanley 46-123 11'' Combination Square

    Stanley 46-123 11'' Combination Square

    12" square makes it easy to mark angles, cuts, and more.* Hard-chrome-plated blade is rust resistant Built-in scriber Durably etched blade is easy to read Precision-machined working surface for improved accuracy Built-in scriber for surface marking High-visibility yellow, die-cast handle with brass…

    $15.99
  19. Angle Cut Maple, Black Walnut and Purpleheart Laminated Pen Blank

    Angle Cut Maple, Black Walnut and Purpleheart Laminated Pen Blank

    This blank is angle cut after being professionally laminated to provide a striking pattern! This Laminated Pen Blank is made of Maple, Black Walnut and Purpleheart in a beautiful layered pattern and measures approximately 5" long x 3/4" square.

    6 Review(s)
    $4.99
  20. 45°-90°-45° Saddle Square and Miter

    45°-90°-45° Saddle Square and Miter

    …trapezoidal face lets you scribe perfect 45° lines in both directions without having to flip thetool! Additional features:* Great for marking and angle checking* Interior window makes marking parallel lines fast and easy* Three scales allow for precise distance measurement (metric only)* Weighs…

    1 Review(s)
    $26.99
  21. #8 Square Drive Lube Finished Screws-Number 8 Screws

    #8 Square Drive Lube Finished Screws-Number 8 Screws

    …lube finish reduces friction for easier installation and protects the screws from surface rust. Square Drive allows freedom from slippage and marring. Requires #2 Square Driver. Sharp thread angle cuts into wood to prevent splitting. Screws resists pullout with threads that cut nearly perpendicular.…

    17 Review(s)
    From: $3.99
  22. 18'' True Angle® Protractor

    18'' True Angle® Protractor

    …and read the angle! Make any angle in seconds — no math required! True Angle is essential for installing crown molding and trim, and is the ideal measuring tool for our Compound Miter Jig (#67626). Ideal for Crown Molding!* 360° adjustable protractor/bevel square has pivoting straight…

    2 Review(s)
    $20.99
  23. Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …Clamp-It® to a work surface using the Universal Fence Clamps, and it becomes a right angle fixture for bench assembly. Compact, lightweight clamps secure the Clamp-It® Square for tight 90 degree angle joints * Clamp-It® features a series of 3/8" holes to accommodate the Universal Fence…

    14 Review(s)
    $29.99
  24. Square-X Drive Lube Finished Screws-Number 6

    Square-X Drive Lube Finished Screws-Number 6

    …reduces friction for easier installation and protects the screws from surface rust. Square-X drive combines a square recess for non-slip fastening and Phillips for convenience. Sharp thread angle cuts into wood to prevent splitting. Screws resists pullout with threads that cut nearly perpendicular.…

    25 Review(s)
    From: $2.99
  • Items 1 - 24 of 67
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X