Back Brackets

  • Items 1 - 24 of 42
  • Page:
    1. 1
    2. 2
  1. 100-lb. Over-Travel Drawer Slides - Centerline® 757 (10" to 28")

    100-lb. Over-Travel Drawer Slides - Centerline® 757 (10" to 28")

    …RoHS compliant, meeting the newest European and US ecological standards.* Tested to 50,000 cycles and backed by Rockler's limited lifetime warranty.* Replaces Accuride series3832.* Rear brackets (47585, sold separately) required for mounting to faceframe cabinets. Note: Over travel for all 10"-28"…

    From: $13.49
  2. Chippendale Back Bracket Feet

    Chippendale Back Bracket Feet

    These feet are intended to be paired with our Chippendale Front Bracket Feet (31132, sold separately) and are sold in left/right pairs. All are carefully carved from 1-1/8" thick x 4-1/2" high stock with an ogee profile and a 3/4" flat on top. All measure 6"W x 4-1/2"H.

    From: $35.69
  3. Queen Anne Back Bracket Feet

    Queen Anne Back Bracket Feet

    These feet are intended to be paired with our Queen Anne Front Bracket Feet (33246, sold separately), and are sold in left/right pairs. All are carefully carved from 1-1/8" thick x 4-1/2" high stock with an ogee profile and a 3/4" flat on top. All measure 6"W x 4-1/2"H.

    From: $35.69
  4. Chippendale Front Bracket Feet

    Chippendale Front Bracket Feet

    …that meets the floor. The feet can be used on either the left or right side by simply turning 90° and pair perfectly with our Chippendale Back Bracket Feet (39515, sold separately). Each order includes triangular corner blocks to be used if extra support is needed. All feet are carefully carved…

    From: $37.29
  5. Rear Brackets for Shop Basics™ GS757 Over-Travel Drawer Slides

    Rear Brackets for Shop Basics™ GS757 Over-Travel Drawer Slides

    …materials. The front end of the slide is simply screwed to the inside edge of the face frame, while the rear end slips into the brackets, which are screwed to the cabinet back. * Designed for use with Shop Basics™ GS757 Over-Travel Drawer Slides (e.g. 43765, sold separately).* Sturdy steel…

    $4.99
  6. Accuride Face Frame Brackets for 2132 Series Drawer Slides

    Accuride Face Frame Brackets for 2132 Series Drawer Slides

    …front and back of Accuride slides for easy installation of Accuride drawer slides on face frame cabinets. (Not required for frameless or European style cabinetry.) These brackets are designed for Accuride series 2132 drawer slides. Pack includes two front brackets and two rear brackets, enough for…

    $9.69
  7. Queen Anne Front Bracket Feet

    Queen Anne Front Bracket Feet

    …that meets the floor. The feet can be used on either the left or right side by simply turning 90° and pair perfectly with our Queen Anne Back Bracket Feet (33989, sold separately). Each order includes triangular corner blocks to be used if extra support is needed. All feet are carefully carved…

    From: $37.29
  8. Accuride Face Frame Brackets For series 3832, 3834 and 3864 Slides

    Accuride Face Frame Brackets For series 3832, 3834 and 3864 Slides

    …and back of Accuride slides for easy installation of Accuride drawer slides on face frame cabinets. (Not required for frameless or European style cabinetry.) These brackets are designed for Accuride series 3832, 3834 and 3864 slides. Pack includes two front brackets and two rear bracket - enough…

    $6.09
  9. Chrome-Plated Mounting Bracket for Hafele Laundry Basket

    Chrome-Plated Mounting Bracket for Hafele Laundry Basket

    The bracket slips into V-notches in the basket, allowing simple removal when it's time to do laundry. The system can also be mounted to the closet wall or to the back of a traditional door, provided there is swing clearance. Chrome-plated steel.

    $2.99
  10. Upper Extension Bracket Kit for Panel Pro 2 Panel Saw

    Upper Extension Bracket Kit for Panel Pro 2 Panel Saw

    …Extension Brackets will come in handy when you're adding wooden upper supports to your Panel Pro 2 Panel Saw! The brackets attach to the back of the frame, making it possible to add a couple of 2 x 4s and keep your sheet goods stable while ripping or cross-cutting. Technical Details* Brackets attach…

    $19.99
  11. Matte Nickel Mounting Bracket for Hafele Laundry Basket

    Matte Nickel Mounting Bracket for Hafele Laundry Basket

    The bracket slips into V-notches in the basket, allowing simple removal when it's time to do laundry. The system can also be mounted to the closet wall or to the back of a traditional door, provided there is swing clearance. Steel with matte nickel finish.

    $2.99
  12. Dark Oil-Rubbed Bronze Mounting Bracket for Hafele Laundry Basket

    Dark Oil-Rubbed Bronze Mounting Bracket for Hafele Laundry Basket

    The bracket slips into V-notches in the basket, allowing simple removal when it's time to do laundry. The system can also be mounted to the closet wall or to the back of a traditional door, provided there is swing clearance. Steel with dark oil-rubbed bronze finish.

    $2.99
  13. Centerline® Lifetime 3612 Rear Brackets, 2-Pack

    Centerline® Lifetime 3612 Rear Brackets, 2-Pack

    Back brackets are required for mounting to face frame cabinets. Used with Centerline Lifetime Series 3612 75-pound Full Extension Drawer Slides.

    $5.29
  14. Jams Shelf Brackets-Select Option

    Jams Shelf Brackets-Select Option

    …handsome brackets! After mounting, sandwich the back edge of any shelf between jaws and tighten to hold in place. When properly mounted to wall studs, brackets support up to 40 lbs. per pair. For shelving 3/16" to 3/4" thick and a maximum of 7-7/8" deep. Jaw opening 13/16" to 25/32". Brackets

    10 Review(s)
    $12.49
  15. Hafele Laundry Baskets and Mounting Brackets-Chrome-Plated

    Hafele Laundry Baskets and Mounting Brackets-Chrome-Plated

    …hampers can mount to the back of a tilt-out door using the separate mounting bracket (sold separately below). The bracket slips into V-notches in the basket, allowing simple removal when it's time to do laundry. The system can also be mounted to the closet wall or to the back of a traditional door,…

    $46.29
  16. Foot Rail Bar Bracket-Polished Brass

    Foot Rail Bar Bracket-Polished Brass

    Attaches foot rail to bar fronts. (Note: All brackets and are supplied with necessary hardware for proper installation.) Bar Mount Bracket may be bolted from back side for additional strength.Measurements (for use with 1-1/2" inch tubing):* clearance/projection (CP): 6-1/16"* base(B): 4"Measurements…

    From: $31.49
  17. Foot Rail Bar Bracket-Polished Stainless Steel

    Foot Rail Bar Bracket-Polished Stainless Steel

    Attaches foot rail to bar fronts. (Note: All brackets and are supplied with necessary hardware for proper installation.) Bar Mount Bracket may be boltedfrom back side for additional strength.Measurements (for use with 1-1/2" inch tubing):* clearance/projection (CP): 6-1/16"* base(B): 4"Measurements…

    From: $50.49
  18. Lathe Dust Hood

    Lathe Dust Hood

    …never been easier! Hood assembly features a hinged viewing shield that can swing up and out of the way. Hood mounts by clamping the bracket to the back of the lathe bed. * Includes convenient mounting bracket that allows easy installation onto many different styles of lathe.* For use with 4" hose.

    10 Review(s)
    $24.99
  19. File Frame System

    File Frame System

    …Set includes black metal 13" front and back rails, 22" cut-to-size side rails, cut-to-size brackets, and side-to-side rail.Easy to adjust between filing configurations - rails snap in and out of position without tools. Able to withstand thousands of back and forth cycles. Accommodates letter, legal…

    $14.99
  20. 500-lb. Heavy Duty Full-Extension Drawer Slides - Accuride 9301 (16" to 60")

    500-lb. Heavy Duty Full-Extension Drawer Slides - Accuride 9301 (16" to 60")

    …anywhere side space is limited, the slides are load rated at 110 lbs. per pair. Drawer widths 32" and cycled 75,000 times. Price is per pair of slides. PLEASE NOTE: We DO NOT carry all sizes listed on the Accuride Product Information Sheet. Click to see Accuride Mounting Brackets (Series 9301)

    6 Review(s)
    From: $122.99
  21. Accuride Eclipse 3132SC Undermount Slides-Eclipse 3132SC Undermount Slides

    Accuride Eclipse 3132SC Undermount Slides-Eclipse 3132SC Undermount Slides

    …drawer front adjustment (1/4 turn cam lock secures drawer front position after horizontal adjustment); and auto-adjust cabinet member positioning.* 100 lb. load rating.* Clear zinc finish.* Self-adjusting face frame bracket (for overlay applications) with 2" depth adjustment sold separately.

    9 Review(s)
    From: $38.99
  22. Universal Cam Lock

    Universal Cam Lock

    Cam Lock adjusts for varying thickness. Cam lock mounting bracket adjusts for 3/4" to 1-3/8" thick panels. Offers three setbacks (1/32", 9/32" , and 15/32"). Back mounting design. Keyed alike.

    5 Review(s)
    $16.99
  23. I-Semble™ Cross Strap Shelf Stabilizer Kit

    I-Semble™ Cross Strap Shelf Stabilizer Kit

    Building backless shelving systems and furniture with our I-Semble™ Slip-on Shelf Brackets (47934, sold separately) couldn't be much simpler, but if the shelving system is very large, you might need some additional support against racking. That's where the I-Semble™ Cross Strap Book…

    $11.99
  24. I-Semble™ Shelf Blocks, 6'' x 8''

    I-Semble™ Shelf Blocks, 6'' x 8''

    …office desk, entertainment centers, kids furniture, fun dorm furniture, and so much more using minimal tools and I-Semble™ Shelf Blocks! These brackets measure 6"D x 8"H, enough for most books, CDs and DVDs. They're so easy to use, even someone with just a few do-it-yourself skills can build a…

    $16.99
  • Items 1 - 24 of 42
  • Page:
    1. 1
    2. 2
Feedback X