Band Saw Guide Blocks

  • Grid List
  • Page:
    1. 1
  • Items 1 - 10 of 10
  • Page:
    1. 1
  1. Olson® Cool Blocks® for Band Saw

    Olson® Cool Blocks® for Band Saw

    Improve your band saw performance with the blade guide blocks recommended by professionals! Cool Blocks replace your standard upper and lower side blade guides, allowing blades to run cooler, quieter and last longer.* Four guide blocks per set.* Made from non-metallic composite material. * Made in…

    4 Review(s)
    From: $16.79
  2. Ceramic Guide Blocks for Bandsaws, 4-Pack

    Ceramic Guide Blocks for Bandsaws, 4-Pack

    …These blocks will only fit 14" Delta or Jet Band-Saws.* #26687 - Guide Blocks for 14" Delta Band Saws: Includes three blocks that are 1/2" x 1/2" x 7/8" and one angled block that is 1/2" x 1/2" x 1-3/8"* #26696 - Guide Blocks for 14" Jet Band Saws: Includes four blocks

    1 Review(s)
    $24.69
  3. Jet Band Saw Riser Blocks

    Jet Band Saw Riser Blocks

    …your band saw by increasing its cutting height capacity from 6" all the way up to 12"! Upgrade for 14" band saws. Increases blade requirements from 93-1/2" to 105". Comes complete with everything needed to convert your saw quickly and easily. Kit includes: Riser block, blade guard assembly, guide

    4 Review(s)
    $134.99
  4. Grr-Rip Block™ Smart Hook Push Block

    Grr-Rip Block™ Smart Hook Push Block

    …Grr-Rip Block increases safety and stability when working with jointers, band saws, router tables, shapers and table saws.* Gravity Heels grab the tail-end of the board or automatically retract mid-board.* Hooks easily locks in the up-position when not needed.* Use the 90° flip guide for veneers…

    2 Review(s)
    $29.95
  5. Jet® 14'' 1.25HP Deluxe Band Saw

    Jet® 14'' 1.25HP Deluxe Band Saw

    The all-new JWBS-14DXPRO 14" Deluxe Band Saw from JET (shown here with optional fence) has been fully redesigned to meet the needs of today's most demanding woodworkers. Gone are the days of adding a riser block; this 14" band saw comes with a massive cast iron frame for increased power that makes…

    4 Review(s)
    $999.99
  6. Jet® 10'' Bench Top Bandsaw w/Open Stand

    Jet® 10'' Bench Top Bandsaw w/Open Stand

    Introducing the all new JET® B3NCH 10" Band Saw. If space is at a premium in your shop or on the job, bring this bandsaw along to tackle your toughest jobs. With quick release blade tension, upper and lower ball bearing blade guides, an extra large cast iron tilting table, and a easily…

    4 Review(s)
    $374.99
  7. Bandsaw Duplicating Pin

    Bandsaw Duplicating Pin

    …Delta 14", General 14" & 15" and Powermatic 14". Also fits saws that use the Carter bearing systems.* Includes the necessary hardware for installation. On some saws you can use existing hardware that hold in the guide blocks.* Slots allow placement to the left or right of the blade as required.*…

    8 Review(s)
    $8.99
  8. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    guides, so they're not your typical skate wheel and bearing.* The unit comes stock with 3 wheel assemblies, which is perfect for most tasks.* Wheel assemblies can be positioned anywhere around the ring.* Patent pending.* Made in USA by the same folks who created the famous Carter band saw guides.

    $359.95
  9. Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …screwing into your expensive fence. * Use the fence clamps singly as stop blocks, or in pairs for sacrificial fences, half-fences, resaw fences, and a variety of other fixtures* Works great for table saws, band saws, cutoff saws, router fences and more* Attach the Clamp-It® to a work surface…

    14 Review(s)
    $29.99
  10. Magswitch T-Handle Magnetic Workholding Square

    Magswitch T-Handle Magnetic Workholding Square

    …reinforcing a fence anywhere on a steel table!* 90° corners for squaring.* Switches in and out of fixtures with ease.* Does not included Resaw Guide shown Magsquares allow for the attachment of all types of fixtures, or shop made jigs for quick connect/disconnect on bandsaws, tablesaws, drill…

    2 Review(s)
    $62.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 10 of 10
  • Page:
    1. 1
Feedback X