Band Saw Bearings

  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
  1. Jet® 14'' 1.25HP Deluxe Band Saw

    Jet® 14'' 1.25HP Deluxe Band Saw

    The all-new JWBS-14DXPRO 14" Deluxe Band Saw from JET (shown here with optional fence) has been fully redesigned to meet the needs of today's most demanding woodworkers. Gone are the days of adding a riser block; this 14" band saw comes with a massive cast iron frame for increased power that makes…

    4 Review(s)
    $999.99
  2. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …guides, so they're not your typical skate wheel and bearing.* The unit comes stock with 3 wheel assemblies, which is perfect for most tasks.* Wheel assemblies can be positioned anywhere around the ring.* Patent pending.* Made in USA by the same folks who created the famous Carter band saw guides.

    $359.95
  3. Carter Band Saw Bearing Guides

    Carter Band Saw Bearing Guides

    …NOTE: These guides will not fit older band saw models with vertical guide posts that have hex-shaped shafts. Available in two models for either Jet or Delta band saws:* 39360 - Fits Jet 14" Band Saws (does not fit Jet Hex Shaft).* 39373 - Fits Delta 14" Band Saws (does not fit Delta Hex Shaft)

    10 Review(s)
    $179.00
  4. Powermatic® 14'' Band Saw with 2-Piece Stand

    Powermatic® 14'' Band Saw with 2-Piece Stand

    The PWBS-14CS Band Saw has an extra large, two-piece cast-iron table. It consists of a 15" x 15" tilting section and a fixed 15" x 5" extension for a total working surface area of 15" x 20". A balanced, nine-spoke cast-iron wheel makes for smooth blade travel, and a Carter™ quick-tension…

    2 Review(s)
    $1,199.99
  5. Rockler Ball Bearing Stand

    Rockler Ball Bearing Stand

    You'll be able to handle almost any load with our heavy-duty Ball Bearing Stand! It's ideal for use with wide or long stock on table saws, band saws, planers and drill presses. Constructed of 1-1/2" steel tubing for superior strength and stability, and have adjustable height from 28-3/4" to 47".…

    21 Review(s)
    $59.99
  6. Jet® 14'' 1HP Band Saw with Closed Stand

    Jet® 14'' 1HP Band Saw with Closed Stand

    A simple but strong band saw that is perfect for the home shop. It requires very little setup when you first get it home but promises years of solid heavy-duty use. You won't regret buying this one!* 6" resaw capacity* 15" x 15" offset cast-iron table gives you more work area in front of the blade*…

    $749.99
  7. Jet® 20'' 3HP Bandsaw w/Quick Tension

    Jet® 20'' 3HP Bandsaw w/Quick Tension

    …accurate blade tracking * Foot brake for rapid stops * Upper and lower ball bearing, micro-adjustable blade guides for proper support during the cut of different size boards * Tool-less, independently adjustable ball bearing guide system for quick and easy adjustments and smooth operation * Rigid,…

    $2,904.99
  8. Jet® 18'' 3HP Bandsaw w/Quick Tension

    Jet® 18'' 3HP Bandsaw w/Quick Tension

    …tension and a second release setting for blade change.* Upper and lower ball bearing, micro-adjustable blade guides for proper support during the cut of different size boards * Tool-less, independently adjustable ball bearing guide system for quick and easy adjustments and smooth operation * Rigid,…

    $1,939.99
  9. Jet® 10'' Bench Top Bandsaw w/Open Stand

    Jet® 10'' Bench Top Bandsaw w/Open Stand

    Introducing the all new JET® B3NCH 10" Band Saw. If space is at a premium in your shop or on the job, bring this bandsaw along to tackle your toughest jobs. With quick release blade tension, upper and lower ball bearing blade guides, an extra large cast iron tilting table, and a easily…

    4 Review(s)
    $374.99
  10. Jet® 18'' 1.75HP Bandsaw w/Quick Tension

    Jet® 18'' 1.75HP Bandsaw w/Quick Tension

    …blade change.* Upper and lower ball bearing, micro-adjustable blade guides for proper support during the cut of different size boards* Tool-less, indpendently adjustable ball bearing guide system for for quick and easy adjustments and smooth operation* 8-spoke band wheels computer balanced to spin…

    $1,784.99
  11. Powermatic® 20'' Bandsaw

    Powermatic® 20'' Bandsaw

    …more work area in front of the blade. The table tilts 45° to the right and 10° to the left and comes standard with T-slot miter gauge. The saw blade is surrounded by a fully adjustable guard, yet easily accessible for changing. Cast iron drive wheels are balanced and equipped with vulcanized…

    $4,819.99
  12. Powermatic® 18'' Bandsaw 5HP 1PH

    Powermatic® 18'' Bandsaw 5HP 1PH

    …tension, and blade release settings for easy blade changes and tracking * Micro-adjustable, tool-less bearing guide system gives close blade control while reducing friction * Special grooved thrust bearing stabilizes smaller blades * Heavy duty T-style rip fence has adjustable aluminum resaw fence *…

    $4,794.99
  13. Bandsaw Duplicating Pin

    Bandsaw Duplicating Pin

    …following bandsaws: Jet 12" and 14", Delta 14", General 14" & 15" and Powermatic 14". Also fits saws that use the Carter bearing systems.* Includes the necessary hardware for installation. On some saws you can use existing hardware that hold in the guide blocks.* Slots allow placement to the…

    8 Review(s)
    $8.99
  14. Powermatic 2013 20'' Bandsaw, 2HP 1PH 230V

    Powermatic 2013 20'' Bandsaw, 2HP 1PH 230V

    sawing capability * 1 Year Warranty * Brochure * Blade Length 158½" * Blade Speed 2000 / 4000 SFPM * Blade Width 1/4 to 1-1/2 * Brand Powermatic * Cutting Capacity Width 20" * Dust Collection Minimum CFM 600cu.ft/min * Dust Port Outer Diameter 4" * Height 81inch * Length 43inch * Maximum Saw

    $4,650.99
  15. Powermatic® 24'' Bandsaw, 3 HP

    Powermatic® 24'' Bandsaw, 3 HP

    …more work area in front of the blade. The table tilts 45° to the right and 10° to the left and comes standard with T-slot miter gauge. The saw blade is surrounded by a fully adjustable guard, yet easily accessible for changing. Cast iron drive wheels are balanced and equipped with vulcanized…

    $5,278.99
  16. Powermatic® 24'' Bandsaw, 5 HP

    Powermatic® 24'' Bandsaw, 5 HP

    …more work area in front of the blade. The table tilts 45° to the right and 10° to the left and comes standard with T-slot miter gauge. The saw blade is surrounded by a fully adjustable guard, yet easily accessible for changing. Cast iron drive wheels are balanced and equipped with vulcanized…

    $5,569.99
  17. Powermatic® 18'' Bandsaw 5HP 3PH

    Powermatic® 18'' Bandsaw 5HP 3PH

    …blade release settings for easy blade changes and tracking * Micro-adjustable, virtually tool-less bearing guide system gives close blade control while reducing friction * Special grooved thrust bearing stabilizes smaller blades * Heavy duty T-style rip fence has adjustable aluminum resaw fence *…

    $4,794.99
  18. Jet® HVBS-56M 5'' x 6'' Horizontal/Vertical Bandsaw, 115/230V, Single-Phase

    Jet® HVBS-56M 5'' x 6'' Horizontal/Vertical Bandsaw, 115/230V, Single-Phase

    saw a must have for your operation. * Heavy-Duty 14-gauge steel stand* Blade drive is a sealed, steel, heat treated worm driving a bronze worm gear in an oil bath* Automatic shut-off after cut* Wheels and handle for easy movement* Ball bearing supported blade wheel* Fully adjustable ball bearing

    $529.00
  19. Rockler Roller Stand

    Rockler Roller Stand

    You'll be able to handle almost any load with our Rockler Roller Stand! It's ideal for use with wide or long stock on table saws, band saws, planers and drill presses. The 220 lb capacity roller stand is constructed of 1-1/2" steel tubing for superior strength and stability as well as an adjustable…

    16 Review(s)
    $59.99
  20. MagSwitch Dual Roller Guide Attachment

    MagSwitch Dual Roller Guide Attachment

    …fence. Features a dual set of roller bearing supports for firm yet smooth gliding of wood through a blade. Includes micro adjustment for fine tuning to 90 degrees. Ideal for re-sawing on band saws, a second hand to support raised/long or tall panels on table saws, general in-feed out-feed support on…

    0 Review(s)
    $42.99
  21. MagSwitch Resaw Guide Attachment

    MagSwitch Resaw Guide Attachment

    …resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support. Technical Details:* Product Dimensions: 4" x 8-1/2"* Low profile design for use on your smallest tables* Includes micro adjustment for fine tuning to 90 degrees* Features roller bearing support for…

    $25.49
  22. Grr-Rip Block™ Smart Hook Push Block

    Grr-Rip Block™ Smart Hook Push Block

    …working with jointers, band saws, router tables, shapers and table saws.* Gravity Heels grab the tail-end of the board or automatically retract mid-board.* Hooks easily locks in the up-position when not needed.* Use the 90° flip guide for veneers or resawing on band saws.* 90° flip guide…

    2 Review(s)
    $29.95
  23. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    …narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig into the miter track and locks your setting at the same time. Ball bearing guide keeps your workpiece…

    104 Review(s)
    $26.99
  24. Festool Trion PS 300 EQ Barrel Grip Jigsaw with New T-Loc Systainer

    Festool Trion PS 300 EQ Barrel Grip Jigsaw with New T-Loc Systainer

    …stores or independent partner resellers. The PS 300 is a jigsaw with the blade guidance system of a bandsaw. Two side guides and a rear thrust bearing keep the blade tracking straight and perpendicular for unprecedented precision. You'll be amazed at the cut quality. Replaceable zero clearance…

    $275.00
  • Items 1 - 24 of 25
  • Page:
    1. 1
    2. 2
Feedback X