Bandsaw Guide

  • Items 1 - 24 of 42
  • Page:
    1. 1
    2. 2
  1. Thin Rip Tablesaw Jig

    Thin Rip Tablesaw Jig

    …binding and kickback. It's simple to use; a single knob locks the jig into the miter track and locks your setting at the same time. Ball bearing guide keeps your workpiece firmly against the fence for perfect repeatability. Use the graduated scale to fine-tune for extremely thin strips. * Note:…

    104 Review(s)
    $26.99
  2. Carter Band Saw Bearing Guides

    Carter Band Saw Bearing Guides

    …lubricated. The kit includes all required mounting hardware plus complete instructions for mounting. PLEASE NOTE: These guides will not fit older band saw models with vertical guide posts that have hex-shaped shafts. Available in two models for either Jet or Delta band saws:* 39360 - Fits Jet 14"…

    10 Review(s)
    $179.00
  3. Olson® Cool Blocks® for Band Saw

    Olson® Cool Blocks® for Band Saw

    Improve your band saw performance with the blade guide blocks recommended by professionals! Cool Blocks replace your standard upper and lower side blade guides, allowing blades to run cooler, quieter and last longer.* Four guide blocks per set.* Made from non-metallic composite material. * Made in…

    4 Review(s)
    From: $16.79
  4. Bandsaw Duplicating Pin

    Bandsaw Duplicating Pin

    Easily duplicate any profile on the bandsaw! Just use this handy guide pin with your choice of template to churn out as many identical shapes as you need - perfect for cathedral style doors. The pin can be adjusted to cut just a hair oversized to make final sizing quick and easy; simply leave the…

    8 Review(s)
    $8.99
  5. Ceramic Guide Blocks for Bandsaws, 4-Pack

    Ceramic Guide Blocks for Bandsaws, 4-Pack

    …to provide a cooler running blade and truer tracking. You'll get guide block seat tolerance of +/-.005. Outlasts every other guideblock on the market! These blocks will only fit 14" Delta or Jet Band-Saws.* #26687 - Guide Blocks for 14" Delta Band Saws: Includes three blocks that are 1/2"…

    1 Review(s)
    $24.69
  6. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …rigid internal ring to prevent sidewall flex* The MultiRest uses the same high strength industrial sealed bearings used in our time tested bandsaw upgrade guides, so they're not your typical skate wheel and bearing.* The unit comes stock with 3 wheel assemblies, which is perfect for most tasks.*…

    $359.95
  7. Jet Band Saw Riser Blocks

    Jet Band Saw Riser Blocks

    …to convert your saw quickly and easily. Kit includes: Riser block, blade guard assembly, guide post, mounting hardware and instructions. Must be used with 105" band saw blade. Technical Details:* Fits Jet 14" bandsaw with 7/8" dia. guide post* Increases depth of cut from 6" maximum to 12" maximum

    4 Review(s)
    $134.99
  8. Laguna LT14 x 14 SUV Bandsaw

    Laguna LT14 x 14 SUV Bandsaw

    …with a powerful 3HP Leeson motor and a 14" resawing height. Pictured with Bandsaw Mobility Kit (sold separately). * Cast iron table * 14" resaw height* Quick release blade* Rack and pinion adjustment for the upper guide * Rack & pinion table tilt* Convenient foot brake with micro switch* Two 4"…

    4 Review(s)
    $1699.00
  9. Kreg Precision Band Saw Fence

    Kreg Precision Band Saw Fence

    …changes* Mounting Rail is 26" long Fence is 18" long* Finish is Anodized for easy clean-up* Pre-drilled holes on the mounting rail fit on most 14" Band Saws* Easy to Remove - no tools required!* Optional resaw guides provides a higher level of control when adjusting for band saw blade drift.

    2 Review(s)
    $107.00
  10. MagSwitch Dual Roller Guide Attachment

    MagSwitch Dual Roller Guide Attachment

    The Magswitch Dual Roller Guide tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Base and MagJigs (sold separately). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Features a dual set of…

    0 Review(s)
    $42.99
  11. Laguna 1412 14'' Band Saw

    Laguna 1412 14'' Band Saw

    …The magnetic blade guard is raised and lowered with a worm-drive rack and pinion so your blade guides stay perfectly adjusted regardless of the height. The saw includes Laguna's renowned ceramic blade guide system. A huge, quick release lever relieves tension for fast blade changes, while convenient…

    1 Review(s)
    $1097.00
  12. Magswitch T-Handle Magnetic Workholding Square

    Magswitch T-Handle Magnetic Workholding Square

    …squaring.* Switches in and out of fixtures with ease.* Does not included Resaw Guide shown Magsquares allow for the attachment of all types of fixtures, or shop made jigs for quick connect/disconnect on bandsaws, tablesaws, drill presses or other ferrous workstations. NOTE: 50mm Magswitch T-Handle…

    2 Review(s)
    $62.99
  13. 7'' Resaw Guide for Kreg Band Saw Fence

    7'' Resaw Guide for Kreg Band Saw Fence

    Resaw guides provide a higher level of control when adjusting for band saw blade drift. Curved face of the guide helps steer board into the cut. Easily attaches to the face of the band saw fence. This 7" Resaw Guide is designed for larger capacity band saws. Use with Kreg Precision Band Saw Fence…

    $19.99
  14. Laguna Tools LT16 HD MBAND 165600 Bandsaw

    Laguna Tools LT16 HD MBAND 165600 Bandsaw

    Laguna Tools says the LT16 HD is a Bandsaw Brute! Powerful, durable, tough, and enduring with an American-made Baldor 4.5 HP motor, it's a woodworker's dream!* Award-winning Laguna Guides with Space Age technology for quick adjustment and presicion cutting* 16 inches of resawing* High/low fence*…

    $3499.00
  15. Complete Illustrated Guide to Bandsaws

    Complete Illustrated Guide to Bandsaws

    The possibilities of what your bandsaw can do are endless ... and explained thoroughly in this beautifully photographed and illustrated book. Contains:* The versatile bandsaw* Tune-up and alignment* Bandsaw blades* Blade guides* Safety* Sawing straight* Sawing basic curves* Advanced cutting…

    $24.95
  16. The New Complete Guide to the Bandsaw Book

    The New Complete Guide to the Bandsaw Book

    Learn how truly versatile the bandsaw can be with the newest volume from renowned band saw expert Mark Duginske. From its typical usage for fair curves, straight cuts, scrollwork, ripping and resawing, all the way to mortise and tenon and dovetail joinery, you'll be amazed at how much you can get…

    1 Review(s)
    $19.95
  17. MagSwitch Resaw Guide Attachment

    MagSwitch Resaw Guide Attachment

    The Magswitch Resaw Guide tool attachment is for use with the Magswitch Workholding System (sold separately, 38007). Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron…

    $25.49
  18. 4-1/2'' Resaw Guide for Kreg Band Saw Fence

    4-1/2'' Resaw Guide for Kreg Band Saw Fence

    Resaw guides provide a higher level of control when adjusting for band saw blade drift. Curved face of the guide helps steer board into the cut. Easily attaches to the face of the band saw fence. Use with Kreg Precision Band Saw Fence (26186) * Incredibly durable anodized aluminum * 4-1/2" Tall for…

    $17.99
  19. Taunton's Complete Illustrated Guide to Box Making, Book

    Taunton's Complete Illustrated Guide to Box Making, Book

    …you will need to produce boxes you'll be proud of. You'll learn about making boxes by using traditional carcase joinery or by shaping on the bandsaw or lathe. Stowe also covers special boxmaking techniques associated with making lids and bases, attaching them to the box, and partitioning boxes…

    $24.95
  20. Powermatic® 20'' Bandsaw

    Powermatic® 20'' Bandsaw

    …left table tilting * Foot brake for rapid stops * Upper and lower ball bearing guides mean less friction, longer life for blade and guides * Rack and pinion adjustable blade guide post for precise locating of guides to workpiece * Table has beveled edge to allow smooth stock movement and easier…

    $4819.99
  21. Jet® JWBS-14SF 14'' Bandsaw

    Jet® JWBS-14SF 14'' Bandsaw

    …industrial-quality build and conveniences such as tool-free blade guide adjustments and a quick-release blade tensioning system, Jet's JWBS-14SF is poised to make a big impression, with the small footprint of a bandsaw. The fence has been redesigned with a laser-etched scale and is micro-adjustable…

    $1899.99
  22. Laguna Tools Italian LT18 Bandsaw

    Laguna Tools Italian LT18 Bandsaw

    …height * Cast iron table * 4" x 2" dust ports* Award-winning Laguna Guides with Space Age technology for quick adjustment and precision cutting* 1-3/8" maximum blade width * 1/16" minimum blade width * Rack and pinion upper guide * High/low fence* Geared trunions* EZ tension indicator* Foot brake*…

    $3850.00
  23. Powermatic® 18'' Bandsaw 5HP 1PH

    Powermatic® 18'' Bandsaw 5HP 1PH

    The new PM1800 Bandsaw is a part of the new breed of high performance products from Powermatic - the Gold Standard since 1921. Designed with an enormous 18" resaw, multi-step blade tension, precision blade guides, and a 5HP motor hungry for hardwoods, this powerhouse comes standard with all the…

    $4794.99
  24. Powermatic® 18'' Bandsaw 5HP 3PH

    Powermatic® 18'' Bandsaw 5HP 3PH

    The new PM1800 Bandsaw is a part of the new breed of high performance products from Powermatic - the Gold Standard since 1921. Designed with an enormous 18" resaw, multi-step blade tension, precision blade guides, and a 5HP motor hungry for hardwoods, this powerhouse comes standard with all the…

    $4794.99
  • Items 1 - 24 of 42
  • Page:
    1. 1
    2. 2
Feedback X