Beading Bit

  • Items 1 - 24 of 55
  • Page:
    1. 1
    2. 2
    3. 3
  1. Edge Beading Router Bits-1/2" Shank

    Edge Beading Router Bits-1/2" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    $34.99 From: $23.99

    SAVE 31%

  2. Freud Traditional Beading Bits

    Freud Traditional Beading Bits

    This Freud beading bit makes quick work of routing both beaded moldings and beaded edges for larger cabinetry elements. With its integral guide bearing, there is no need to set the depth of cut with a fence. You can even use the bit without a router table at all. The taller section at the top of the…

    3 Review(s)
    From: $35.97
  3. Edge Beading Router Bit-1/4" Shank

    Edge Beading Router Bit-1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  4. Shutter Bead Router Bit

    Shutter Bead Router Bit

    For use with the Rockler Shutter System. Use this router bit to add elegance and style to your custom shutters. Use with the included bearing to put a bead on your shutter stiles, then remove the bearing to cut a chamfer on your shutter rails. 1/2" shank. Ready to build your own custom shutters with…

    $29.99
  5. Triple Bead Router Bit

    Triple Bead Router Bit

    Whether you need three beads in a row, or just a single bead for a decorative edge, this multi-purpose beading bit will suit your needs. Just crank the bit up or down to reveal as much of the cutter as is required. Cuts 1-3 beads in a single pass, potentially tripling productivity. Ideally suited…

    3 Review(s)
    $46.99
  6. Rockler Restoration Beading Router Bits, 1/2" Shank

    Rockler Restoration Beading Router Bits, 1/2" Shank

    Our beading bits come in a range of sizes to suit many applications. Use the smaller bits to make beaded trim moldings, and the larger bits for bull-nosed edges on thicker stock. A 1/4" beaded molding mitered around doors and drawer fronts adds a subtle and strikingly attractive effect. In…

    2 Review(s)
    From: $26.99
  7. Freud Traditional Beading Bits - 1/4'' Shank

    Freud Traditional Beading Bits - 1/4'' Shank

    Application: Matching moldings in historic homes.* Forms a single bead with a square shoulder.* Commonly used by remodelers to match base moldings in historic homes.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $33.97
  8. 1/2'' Convex Edging Router Bit

    1/2'' Convex Edging Router Bit

    …children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table tops. The rounded profile measures 1/2" in length, so it will leave two 1/8" beads on 3/4" stock.

    1 Review(s)
    $29.99
  9. Freud Corner Beading Bit

    Freud Corner Beading Bit

    Application: Beams, posts, railings and fine furniture. * Adds an attractive bead to beams, posts, railings, and millwork. * Ideal for accenting square table legs. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on hand-held and table-mounted portable routers.

    $47.97
  10. Vertical Panel Router Bit Set With Wooden Case

    Vertical Panel Router Bit Set With Wooden Case

    …size. The panel raiser is vertically oriented, which is ideal for smaller routers, and features a 5/8" radius ogee profile that goes well with the beaded profile on the stick work. The stile and rail cutters are full height cutters. This means that if you jog your router table fence, they can be…

    1 Review(s)
    $149.99
  11. 30 Degree Chamfer Bead Profile Bit

    30 Degree Chamfer Bead Profile Bit

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  12. Classical Edge Bead Bit

    Classical Edge Bead Bit

    With its graceful, elongated round over accented by a small bead, the profile on this edge forming bit looks at home on a wide variety of cabinetry styles. The 3/8" guide bearing makes setups fool-proof, and the 1/2" shank with high-grade carbide leaves a smooth, chatter-free cut.

    $45.99
  13. 1/8'' Miniature Roundover Router Bit

    1/8'' Miniature Roundover Router Bit

    …miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts! This bit features a small 1/8" radius, and can be used as a round over bit, or lowered to create a bead on one face of the workpiece. 1/8" radius bits are also ideal for…

    2 Review(s)
    $19.99
  14. Rockler 3-Pc. Roundover/Beading Bit Set

    Rockler 3-Pc. Roundover/Beading Bit Set

    This handy set consists of the most commonly used roundover bits: 1/4", 3/8" and 1/2" radius. Each bit comes with an extra 3/8" bearing that can be used to convert the bit to a beading bit. Each bit also features a 1/2" shank for excellent rigidity and the smoothest possible cuts. Comes in a…

    4 Review(s)
    $89.99
  15. Freud # 99-472 Beadboard Bit System

    Freud # 99-472 Beadboard Bit System

    …or switch to the 1/16" cutter for 3/8" material. Once the tongue and groove joints are complete, use the solid carbide Radius V-Groove Bit to rout the beads into the faces of your boards. Application: Create beautiful wainscoting, paneling, back panels for bookcases, and much more.* Mills…

    From: $18.97
  16. Matching Flute and Bead Router Bits

    Matching Flute and Bead Router Bits

    These two bits have corresponding cove and bead profiles, which make them ideal for creating curved forms such as those found in the long, curving hulls of canoes, and in lightweight coopered barrels. You can also use them for the flexible lids on roll-tops desks, provided there is only a convex…

    $29.99
  17. Freud Beading Router Bits

    Freud Beading Router Bits

    Cut with confidence with this Freud quality router bit! Ideal for decorative work.* Add an attractive bead profile to furniture and millwork * Cuts all composition materials, plywoods, hardwoods, and softwoods* Use on hand-held and table-mounted portable routers

    From: $29.97
  18. Freud Quadra-Cut Beading Bit

    Freud Quadra-Cut Beading Bit

    Soften furniture edges and create decorative profiles with this premium beading bit from Freud. The bit combines a round over with subtle steps on either side for added definition. Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible, providing crisp, clean edges…

    3 Review(s)
    $51.97
  19. Freud Quadra-Cut Beading Bits-Optional Sizes

    Freud Quadra-Cut Beading Bits-Optional Sizes

    Beading Bits cut a precise radius with a step on either side, the perfect combination of tactile softness and visual definition. The 4 cutter Quadra-Cut design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Beading

    3 Review(s)
    From: $38.97
  20. 1/2" Beadlock® Pro Accessory Kit

    1/2" Beadlock® Pro Accessory Kit

    The Beadlock® Pro Accessory Kit include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For use with the Beadlock® Pro Joinery Kit.

    $47.99
  21. Freud Canoe Joint Bits

    Freud Canoe Joint Bits

    …versions suitable for stock up to 1/2" thick, see Rockler bits 91701 and 36992. Application: Producing joints for curved projects such as circular planters and canoes.* Bit 99-017 cuts the flute and 99-018 cuts the mating bead.* Cuts all composition materials, plywoods, hardwoods, and softwoods.*…

    From: $49.97
  22. Rockler Bead & Cove Bits for Canoe Building

    Rockler Bead & Cove Bits for Canoe Building

    …door panels. To machine your parts, just use the upper half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a "hinging" action that is perfect for any curved element. The entire bit can also be used as an attractive decorative edge or molding profile.…

    4 Review(s)
    From: $49.99
  23. Freud 36-119, 3/16'' Radius Beading Bit

    Freud 36-119, 3/16'' Radius Beading Bit

    Cut with confidence with this quality Freud® edge forming router bit! Round over profile with steps on either side is ideal for decorative work.* 3/16" roundover radius.* 2-1/2" overall length.* Add an attractive bead profile to furniture and millwork.* Cuts all composition materials, plywoods,…

    $32.97 $19.99

    SAVE 39%

  24. Router Bit Set-Up Jigs for 22637 Drawer Lock Corner Bit

    Router Bit Set-Up Jigs for 22637 Drawer Lock Corner Bit

    Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit. All jigs are manufactured for 3/4" stock. They are made of durable HDPE and measure 2" x 3-7/8" x 3/4". (Jigs designed for rail-and-stile have…

    $7.69
  • Items 1 - 24 of 55
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X