Beading Router Bit

  • Items 1 - 24 of 48
  • Page:
    1. 1
    2. 2
  1. Rockler Shutter Bead Router Bit - 7/8" Dia x 9/16" H x 1/2" Shank

    Rockler Shutter Bead Router Bit - 7/8" Dia x 9/16" H x 1/2" Shank

    For use with the Rockler Shutter System. Use this router bit to add elegance and style to your custom shutters. Use with the included bearing to put a bead on your shutter stiles, then remove the bearing to cut a chamfer on your shutter rails. 1/2" shank. Ready to build your own custom shutters with…

    $29.99
  2. Rockler Edge Beading Router Bits - 1/2" Shank

    Rockler Edge Beading Router Bits - 1/2" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    $34.99 From: $26.24

    SAVE 25%

  3. Freud® Traditional Beading Router Bits - 1/2" Shank

    Freud® Traditional Beading Router Bits - 1/2" Shank

    This Freud beading bit makes quick work of routing both beaded moldings and beaded edges for larger cabinetry elements. With its integral guide bearing, there is no need to set the depth of cut with a fence. You can even use the bit without a router table at all. The taller section at the top of the…

    3 Review(s)
    From: $35.97
  4. Freud® 99-760 Premier Adjustable Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    Freud® 99-760 Premier Adjustable Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    Produce perfect-fitting beaded stile and rail doors from 5/8" to 1-1/4" thick! Adjustable shims enable a tight fit when using plywood as thin as 7/32" (5.5mm), and also allow use with thick panels. To produce the front of a longer tenon profile for blind tenons, through tenons or bridle joints,…

    4 Review(s)
    $127.47
  5. Freud® Quadra-Cut™ Beading Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Beading Router Bits - 1/2" Shank

    …the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Beading bit applications: Create decorative bead edges.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    3 Review(s)
    From: $38.97
  6. Rockler Restoration Beading Router Bits - 1/2" Shank

    Rockler Restoration Beading Router Bits - 1/2" Shank

    Our beading bits come in a range of sizes to suit many applications. Use the smaller bits to make beaded trim moldings, and the larger bits for bull-nosed edges on thicker stock. A 1/4" beaded molding mitered around doors and drawer fronts adds a subtle and strikingly attractive effect. In…

    2 Review(s)
    From: $26.99
  7. Rockler Full Bead Router Bit - 1-1/8" Dia x 5/8" H x 1/4" Shank

    Rockler Full Bead Router Bit - 1-1/8" Dia x 5/8" H x 1/4" Shank

    …bearings, this beading bit lets you cut further into the panel, and in a variety of configurations, both freehand and in a table. It also doubles as a 1/4" round over bit - just raise the bit until only the bottom radius is exposed. Two flutes and 5/8" bearings. Top quality bits that meet the high…

    $49.99
  8. Rockler Bead In-Stile and Rail Router Bit Set - 1/2" Shank

    Rockler Bead In-Stile and Rail Router Bit Set - 1/2" Shank

    Rockler stile and rail bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. This stile and rail set includes two arbors that can be disassembled for enhanced versatility. You can shim out the tenon cutter for a precision fit, and you can even rearrange…

    $119.99
  9. Rockler Bead Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Bead Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  10. Rockler Roundover/ Beading Router Bits - 1/4" Shank

    Rockler Roundover/ Beading Router Bits - 1/4" Shank

    beaded edge—these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to the beading

    13 Review(s)
    From: $22.99
  11. Freud® Traditional Beading Router Bits - 1/4" Shank

    Freud® Traditional Beading Router Bits - 1/4" Shank

    Application: Matching moldings in historic homes.* Forms a single bead with a square shoulder.* Commonly used by remodelers to match base moldings in historic homes.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $33.97
  12. Rockler Edge Beading Router Bits - 1/4" Shank

    Rockler Edge Beading Router Bits - 1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  13. Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    Whether you need three beads in a row, or just a single bead for a decorative edge, this multi-purpose beading bit will suit your needs. Just crank the bit up or down to reveal as much of the cutter as is required. Cuts 1-3 beads in a single pass, potentially tripling productivity. Ideally suited…

    3 Review(s)
    $46.99
  14. Rockler Vertical Panel Router Bit Set With Wooden Case

    Rockler Vertical Panel Router Bit Set With Wooden Case

    …vertically oriented, which is ideal for smaller routers, and features a 5/8" radius ogee profile that goes well with the beaded profile on the stick work. The stile and rail cutters are full height cutters. This means that if you jog your router table fence, they can be used to joint off saw…

    1 Review(s)
    $149.99
  15. Freud® 99-763 Bead Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    Freud® 99-763 Bead Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    …These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and…

    $127.47
  16. Freud® Beadboard Router Bit System

    Freud® Beadboard Router Bit System

    …or switch to the 1/16" cutter for 3/8" material. Once the tongue and groove joints are complete, use the solid carbide Radius V-Groove Bit to rout the beads into the faces of your boards. Application: Create beautiful wainscoting, paneling, back panels for bookcases, and much more.* Mills…

    From: $18.97
  17. Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2" Shank

    Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2" Shank

    This handy set consists of the most commonly used roundover bits: 1/4", 3/8" and 1/2" radius. Each bit comes with an extra 3/8" bearing that can be used to convert the bit to a beading bit. Each bit also features a 1/2" shank for excellent rigidity and the smoothest possible cuts. Comes in a…

    4 Review(s)
    $89.99
  18. Router Bit Set-Up Jigs-Rail-and-Style Bits

    Router Bit Set-Up Jigs-Rail-and-Style Bits

    Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They…

    $7.69
  19. Freud® 99-020 Corner Beading Router Bit - 15/16" Dia x 5/8" H x 1/2" Shank

    Freud® 99-020 Corner Beading Router Bit - 15/16" Dia x 5/8" H x 1/2" Shank

    Application: Beams, posts, railings and fine furniture. * Adds an attractive bead to beams, posts, railings, and millwork. * Ideal for accenting square table legs. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on hand-held and table-mounted portable routers.

    $47.97
  20. Freud® Beading Router Bits - 1/4" Shank

    Freud® Beading Router Bits - 1/4" Shank

    Cut with confidence with this Freud quality router bit! Ideal for decorative work.* Add an attractive bead profile to furniture and millwork * Cuts all composition materials, plywoods, hardwoods, and softwoods* Use on hand-held and table-mounted portable routers

    From: $29.97
  21. Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    …door panels. To machine your parts, just use the upper half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a "hinging" action that is perfect for any curved element. The entire bit can also be used as an attractive decorative edge or molding profile.…

    4 Review(s)
    From: $49.99
  22. Freud® 36-119 Beading Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Freud® 36-119 Beading Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Cut with confidence with this quality Freud® edge forming router bit! Round over profile with steps on either side is ideal for decorative work.* 3/16" roundover radius.* 2-1/2" overall length.* Add an attractive bead profile to furniture and millwork.* Cuts all composition materials, plywoods,…

    $32.97
  23. Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    …children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table tops. The rounded profile measures 1/2" in length, so it will leave two 1/8" beads on 3/4" stock.

    1 Review(s)
    $29.99
  24. Rockler Matching Flute and Bead Router Bits - 1/2" Shank

    Rockler Matching Flute and Bead Router Bits - 1/2" Shank

    These two bits have corresponding cove and bead profiles, which make them ideal for creating curved forms such as those found in the long, curving hulls of canoes, and in lightweight coopered barrels. You can also use them for the flexible lids on roll-tops desks, provided there is only a convex…

    $29.99
  • Items 1 - 24 of 48
  • Page:
    1. 1
    2. 2
Feedback X