Bench Dog

  • Items 1 - 24 of 94
  • Page:
    1. 1
    2. 2
    3. 3
  1. Round Bench Dogs

    Round Bench Dogs

    Securely hold stock to the bench. Featuring a spring steel wire that allows for height adjustment. For use on a 3/4" hole. The Round Bench Dogs are 4-3/8" long with a 3/4" diameter. The flat face area is 1-3/16" high.

    1 Review(s)
    $24.99
  2. Bench Accessory Kit

    Bench Accessory Kit

    …with our new seven piece bench accessory kit. The seven piece Bench Accessory kit features a non-slip mat to prevent work pieces from moving while using a router or electric sander. Two hold down clamps for keeping your work piece against your bench and four Bench Dogs that hold your stock in place…

    16 Review(s)
    $27.99
  3. Bench Cookie® Plus Master Kit

    Bench Cookie® Plus Master Kit

    Bench Cookie® Plus Work Grippers.* XL Risers triple the height of your Bench Cookie® Plus Work Grippers.* Raise workpieces for work with saws and other shop tools that require extra height.* Both sizes fit 3/4" bench dog holes or 3/4" holes drilled into sawhorses or other fixtures. Bench

    8 Review(s)
    $59.99 $39.99

    SAVE 33%

  4. Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    …adding this industrial grade router table in place of the extension wing. Perfect for shops where space is tight, ProMAX includes a cast-iron top, Bench Dog's 28" ProFence, a miter gauge track that adjusts for a no-slop fit, and a solid aluminum insert plate that is pre-drilled to fit your specific…

    14 Review(s)
    $349.99
  5. Rockler Bench Dogs

    Rockler Bench Dogs

    Bench Dogs are an inexpensive solution for holding stock in place for belt sanding, hand planing and securing other objects. * Ideal for all workbenches that have 3/4" dia. Holes. With low profile (7/16") for working with 1/2" thick material and up.* Sold in packages of 4.

    14 Review(s)
    $7.99
  6. Rockler Multi-Purpose Shop Kit

    Rockler Multi-Purpose Shop Kit

    Keep these shop essentials handy and save!* Set of 4 Rockler Bench Dogs* Rockler Screw-Lube* Magnetizer/Demagnetizer Rockler Bench Dogs* Hold stock in place while sanding, hand planing, or securing other objects* 3/4" dia. with a low 7/16" profile for working with 1/2" material and up* Set of…

    $17.47
  7. Bench Dog® ProTop Contractor Portable Router Table

    Bench Dog® ProTop Contractor Portable Router Table

    …most full-size router tables. With 15" of inside cabinet height, it can house virtually any router. It includes a non-marring laminate top, Bench Dog's 22" ProFence with integral 2-1/2" dust port, an aluminum miter accessory track that adjusts for a no-slop fit for standard miter gauges, a…

    12 Review(s)
    $299.99
  8. Rockler Bench Dog® Bullnose Trim Gauge

    Rockler Bench Dog® Bullnose Trim Gauge

    Simplify trim work on 3/4" rounded drywall corners with this clever jig. It helps layout perfect lines for tight-fitting three-piece corners. Plus, if you're working alone you can nail it in place to anchor your tape measure. Great for installing both crown and base molding. Technical Details:*…

    6 Review(s)
    $10.49
  9. 4-1/4'' Reach Hold-Down Clamp

    4-1/4'' Reach Hold-Down Clamp

    Use this clamp for wedging the workpiece against your bench. 4-1/4" reach. 8-1/4" long. 11/16" diameter.

    2 Review(s)
    $13.99
  10. Rockler Bench Dog® 40-150 ProLift Router Adjustment System

    Rockler Bench Dog® 40-150 ProLift Router Adjustment System

    …router running cool, while the direct-drive mechanism eliminates the complication and slop of belts, chains and gears. Compatible with ALL Bench Dog® Router Tables (and all NEW Rockler Router Tables). If you're looking for a powerful lift that moves faster and lasts longer, this is it!* Plate…

    17 Review(s)
    $349.99
  11. Beech Wood Workbenches

    Beech Wood Workbenches

    …a hardwood handle A Better Bench...* Solid beech top and supporting trestle* Dowel pin construction* Wider feet for added stability* Two rows of round dog holes spaced 5" apart* Dog holes on legs to support long workpieces while in vise* Four steel-cored round bench dogs* Storage shelf with plywood…

    27 Review(s)
    From: $524.99
  12. Trim-Loc™ Installation Tool

    Trim-Loc™ Installation Tool

    …perfect miters every time. Layout, mark and cut all the trim pieces at once. * Features precision-machined 45º and 90º guides to mark cut lines. * It's also a handy square and setup tool; holds stock in perfect alignment while you nail it in place. * With screw holes for mounting to bench.

    $12.99
  13. Bench Dog® Dual Track

    Bench Dog® Dual Track

    This durable aluminum auxiliary track features Bench Dog's innovative Universal T-track, which has a unique stacked-slot design that accepts any accessory with 1/4" T-bolts, 1/4" T-bolts, or 1/4" hex bolts. Perfect for tables, fences, and even jigs. In addition to the Universal T-track, Dual-Track…

    9 Review(s)
    $31.49
  14. Rockler Bench Cookie® Plus Work Grippers

    Rockler Bench Cookie® Plus Work Grippers

    …posts for your Bench Cookie® Plus Work Grippers.* Bench Cookie® Finishing Cones: Bench Cookie® Finishing Cones lift your project off your bench with minimal surface contact, keeping it stable during the entire finishing process! Custom sized to fit snugly over the Bench Cookies®.…

    31 Review(s)
    $12.49 $9.99

    SAVE 20%

  15. Bench Dog 3-Piece Safety Kit

    Bench Dog 3-Piece Safety Kit

    …L Ultra Push-Bloc delivers:* Ergonomically-correct handle* Non-marring rubber bottom uses the same high-friction rubber surface found on our Patent Pending Bench Cookie™ Work Grippers* Gives you maximum control while routing, jointing, and ripping One Magnetic Push Stick One Ultra Push-Bloc

    2 Review(s)
    $29.99
  16. Rockler Bench Dog® 1/4'' Shelf Pin Jig

    Rockler Bench Dog® 1/4'' Shelf Pin Jig

    Get level, wobble-free shelves, every time with the new Bench Dog Shelf Pin Jig. The jig is compact and portable, yet works with the tallest of cabinets. Just use the included index pin and self-centering drill bit to daisy-chain your shelf holes to whatever length desired. Can be used when the back…

    $19.99
  17. Bench Dog® Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

    Bench Dog® Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

    Meet the ultimate router table - complete with a fence, plate, steel cabinet, and a router lift! At 24" x 32" x 1-1/2", the Bench Dog Cast-Iron Router Table is the largest, flattest, and most durable option on the market. Weighing in at nearly 100 lbs, the one-piece top provides more than 5 square…

    2 Review(s)
    $1,249.99
  18. Rockler 9'' Quick Release Workbench Vise

    Rockler 9'' Quick Release Workbench Vise

    * Designed for benches up to 2-1/4" thick.* 9" wide jaws with 13" opening capacity.* Jaws are drilled out for easy attachment of wooden vise pads.* Features adjustable pop-up dog on vise face for clamping panels in conjunction with bench dogs.* Manufactured from close-grained cast iron.* With…

    20 Review(s)
    $159.99
  19. ProLift Adapter 40-002 for select Porter-Cable, Bosch and DeWalt routers

    ProLift Adapter 40-002 for select Porter-Cable, Bosch and DeWalt routers

    Necessary accessory to mount the following routers in the Bench Dog® ProLift router lift (28827, sold separately):* Porter-Cable 690 Series* Porter-Cable 890 Series* Bosch 1617* Bosch 1618* DeWalt 610* DeWalt 616* DeWalt 618

    $32.99
  20. Bench Dog® Crown-Cut

    Bench Dog® Crown-Cut

    Cutting crown molding doesn't have to be difficult! Crown-Cut eliminates the complication of cutting crown and cove molding, giving you perfect miters, every time. What's the secret? Crown-Cut holds the molding at its intended angle while you cut it. No more compound cuts and tedious trial and…

    9 Review(s)
    $27.99
  21. Rockler Crown Molding Support

    Rockler Crown Molding Support

    …light work" is a suitable motto for the new Crown Support from Bench Dog Tools. What used to require an assistant and a second ladder is now portable, permanent and unfailingly reliable. Unlike similar products on the market, the Bench Dog Crown Support straddles the molding, leaving the installer…

    6 Review(s)
    $31.99
  22. Bench Dog® Router Table Plates

    Bench Dog® Router Table Plates

    These 1/4" thick aluminum plates all measure 8-1/4" x 11-3/4" - the exact size of the plate opening in Bench Dog's new ProTop and ProMaxRT router tables. Each plate has a different mounting-hole configuration so that virtually every router on the market will fit one of the four pre-drilled options.…

    7 Review(s)
    $64.99
  23. Bench Dog® Pro-Cut™ Portable Saw Guide

    Bench Dog® Pro-Cut™ Portable Saw Guide

    Get perfect 90° crosscuts with your circular saw every time!* Built-in guides square Pro-Cut to the workpiece.* Two rubber strips prevent side-to-side movement. Instantly aligns your saw to the cut line, plus reduces dangerous kickbacks, binding and bent blades.* Ideal for cutting lumber,…

    $15.99
  24. Bench Dog® Panel-Loc™ Panel Cutting Guide

    Bench Dog® Panel-Loc™ Panel Cutting Guide

    The ultimate panel-cutting accessory! Developed by acclaimed woodworker Lonnie Bird, Panel-Loc is a combination hand guard and panel hold-down that provides safer and better cuts when routing raised panels. Orange push blocks not included. Firmly holds panel down and eliminates unwanted lifting; it…

    $52.99
  • Items 1 - 24 of 94
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X