Bit Extender

  • Items 1 - 24 of 30
  • Page:
    1. 1
    2. 2
  1. Forstner Bit Extender

    Forstner Bit Extender

    Get an extra 2-1/2" of reach into deep holes with this Forstner bit extender. Great for rustic furniture and joining wide timbers. Also works with any other style of 3/8" shank drill bit greater than 1" in diameter.Forstner bit not included.

    9 Review(s)
    $6.49
  2. Router Xtreme Xtension™

    Router Xtreme Xtension™

    …router bits from above the table with only one tool - PLUS extend router bit's reach. * No need to lock your spindle - single locking screw secures the bit.* Runs 1/8" through 3-1/2" diameter cutters.* Additional 1-1/4" length and 1" deep bore provide complete support of all 1/2" and 1/4" shank bits

    5 Review(s)
    $76.99
  3. Leigh 7-Piece Router Bit Set

    Leigh 7-Piece Router Bit Set

    …7 carbide tipped bits, each honed with 600 grit diamond wheels for superbly smooth, efficient cutting. 8mm bit shanks are 1-3/4" long to extend through the thickness of the guide fingers. Set includes 4 Through Dovetail bits (1/4", 5/16", 3/8', and 7/16"), and 3 Half-blind bits (10°, 12°,…

    1 Review(s)
    $147.99
  4. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …with a forstner bit or another bit of your choice. 2. Chuck the 1/2" Tenon-Lok™ cutting tool in your drill. 3. Before starting the drill, position the Tenon-Lok™ cutter all the way at the bottom of the mortise. 4. Start drilling at a low RPM and push hard enough to extend the cutter's…

    2 Review(s)
    $25.49
  5. JIG IT® Shelving Jig w/Self-Centering Bit

    JIG IT® Shelving Jig w/Self-Centering Bit

    …handle includes two storage compartments for self-centering bits! Additional Self-Centering Bit sizes available separately. * Drills holes either 1-7/16" or 2-1/2" from edge. * Insert shelf pin in top or bottom position to extend jig for continuous drilling.* Shelving Jigs measure 20"…

    188 Review(s)
    $36.99
  6. General Finishes Dry-Time Extender, Pint

    General Finishes Dry-Time Extender, Pint

    Sometimes, the fast dry-times of water-based finishes can be a bit too much. If you're working on a larger project where lap lines might be issue, this specially formulated wetting additive will extend your open times for better flattening and fewer brush marks. Pint.

    $11.99
  7. Freud® 66-100 Solid Carbide Bevel Trim Router Bit - 1/4" Dia x 1/4" H x 1/4" Shank

    Freud® 66-100 Solid Carbide Bevel Trim Router Bit - 1/4" Dia x 1/4" H x 1/4" Shank

    With its slight 7° bevel, this laminate trimming bit will give you a nice, defined edge with just enough angle to take away the sharpness. The shank extends beyond the cutting edge, so the bit self-pilots against the substrate. Without the need a bearing guide, you won't have to worry about…

    $9.47
  8. Freud® 99-762 Shaker Stile and Rail Router Bit - 1-11/16" Dia x 1/2" Shank

    Freud® 99-762 Shaker Stile and Rail Router Bit - 1-11/16" Dia x 1/2" Shank

    …for rattle-free plywood panels or solid wood raised panels. You can even create extended tenons for extra joint strength on larger doors. All this with Freud's trademark TiCo™ Hi-Density Carbide to maximize bit life and material finish.* Tenon length: 7/16".* Lets you choose from a variety of…

    $127.47
  9. Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    …allow you to extend long rows of holes indefinitely* Included indexing pins store conveniently in the ends of each guide rail when not in use* Drilling template is made of thick acrylic for durability* Designed for un-assembled cabinet components from 8-1/4"W to 25-1/4"W Self-Centering Drill Bits:

    $111.47
  10. Freud® 99-760 Premier Adjustable Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    Freud® 99-760 Premier Adjustable Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    …cutter (including bearing and spindle). High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch buildup. 1/2" shanks.* Create extended tenons for extra door joint strength (patented solution) - Top portion of cutter, including bearing and…

    4 Review(s)
    $127.47
  11. Freud® 64-100 Solid Carbide Flush Trim Router Bit - 1/4" Dia x 3/8" H x 1/4" Shank

    Freud® 64-100 Solid Carbide Flush Trim Router Bit - 1/4" Dia x 3/8" H x 1/4" Shank

    …tablemounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD™ Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and precision-ground for the smoothest possible cuts. Specifications:*…

    $9.47
  12. Rockler Pitch & Resin Remover

    Rockler Pitch & Resin Remover

    Ready-to-use solution quickly and easily cleans away the residue buildup that develops on blades and bits. Cleaner cutting edges will give you superior machining results and extend the life of your tools. Available in 16 fl. oz spray bottle or 1 quart size. Technical Details:* Pitch & Resin Remover…

    8 Review(s)
    From: $10.99
  13. Porter-Cable 895PK Multi-Base Router Kit Fixed and Plunge Base

    Porter-Cable 895PK Multi-Base Router Kit Fixed and Plunge Base

    …grips for greater comfort in extended use* Spindle lock feature allows for single wrench bit changes* Clear Lexan® sub-base provides improved durability and bit visibility* Collets included to accept 1/4" and 1/2" shank bits* Release the motor, adjust bit height and clamp the motor from…

    6 Review(s)
    $279.99
  14. Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases

    Porter Cable 450PK Compact Router Combo with Fixed and Plunge Bases

    …adjustment rod for precise depth setting* Up to 1.5" of depth travel with standard base and 2" with plunge base* Extended 8-Slot 1/4" Collet Maximizes Surface Contact with Router Bit Shank for a Tighter Grip* Fixed & Plunge Base Combo Kit; Large Plunge Base Platform Provides Added Stability for…

    $189.00
  15. Flex Extension

    Flex Extension

    Lets you drill and drive-even in the tightest spaces! Extend your reach with the Flex Extension! It bends, twists, and turns to let you get into the tightest spaces with ease, yet lets you keep a firm and steady grip while the while the inside turning mechanism rotates.* 12" long.* Designed for…

    16 Review(s)
    $7.99 $2.99

    SAVE 63%

  16. Leigh Pin Plates for R9 Plus Joinery System, 2 Pack

    Leigh Pin Plates for R9 Plus Joinery System, 2 Pack

    Extend the length of your joinery by adding a pair of Leigh R9 Pin Plates to your Leigh R9 Plus Joinery System! Each additional pin plate position extends the beam by 10" and allows an additional 9 inches of joint pattern. Technical Details:* Each additional pin plate position extends the beam by…

    $11.99
  17. Avenger Pro Limited Edition 10-Piece Countersink Set

    Avenger Pro Limited Edition 10-Piece Countersink Set

    High speed steel taper drill bits and heat treated carbon steel plug cutters cut all types of wood, plywood, and composite wood material and perform over an extended life. Set comes in a convenient carrying case.

    1 Review(s)
    $114.99
  18. Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters

    Hex Shank Tapered Plug Cutters-Hex Shank Tapered Plug Cutters

    …press or similar stationary machine. Hex shank can be used in keyed, keyless and quick-change chucks. Features:* Made from heat treated steel for extended tool life* Flute design for smooth, clean, precise cutting action in any type of wood* Makes wooden plugs with chamfered/tapered shapes for easy…

    16 Review(s)
    From: $14.99
  19. Rockler Pro Shelf Drilling Jig

    Rockler Pro Shelf Drilling Jig

    …allow you to extend long rows of holes indefinitely* Included indexing pins store conveniently in the ends of each guide rail when not in use* Drilling template is made of thick acrylic for durability* Designed for un-assembled cabinet components from 8-1/4"W to 25-1/4"W Self-Centering Drill Bits:

    16 Review(s)
    $84.99
  20. Solid Brass Lid Support Hinge

    Solid Brass Lid Support Hinge

    …35mm hinge cup drilling bit.* Hinges can be mortised in or surface mounted.* Integral stop holds lid open at just over 90°.* Solid brass construction with a polished brass finish.* Periodic lubrication with light household oil is recommended for smooth movement of leaves and extended hinge life.

    1 Review(s)
    $22.99
  21. Miniature Purse Pen Hardware Kit - Chrome

    Miniature Purse Pen Hardware Kit - Chrome

    …pen for purses and pockets alike. And there's no need to worry about cramped hands, either. Once the cap is removed, it fits onto the butt end, extending the length of the pen to a comfortable 5". Friction fit cap. Features a chrome finish. Includes pen hardware kit and replaceable ballpoint refill.…

    $6.99
  22. Miniature Purse Pen Hardware Kit - Gold-Plated

    Miniature Purse Pen Hardware Kit - Gold-Plated

    …pen for purses and pockets alike. And there's no need to worry about cramped hands, either. Once the cap is removed, it fits onto the butt end, extending the length of the pen to a comfortable 5". Friction fit cap. Features a gold-plated finish. Includes pen hardware kit and replaceable ballpoint…

    0 Review(s)
    $7.99
  23. Dewalt DCD950VX 18V 1/2'' XRP™ Hammerdrill/Drill/Driver w/Vehicle Charger

    Dewalt DCD950VX 18V 1/2'' XRP™ Hammerdrill/Drill/Driver w/Vehicle Charger

    …XRP™ extended run-time batteries provide long run-time & battery life* Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time* Heavy-duty 1/2" self-tightening chuck tightens throughout operation providing superior bit gripping…

    $391.99
  24. Dewalt DCD970KL 18V 1/2'' XRP™ LiIon Hammerdrill Drill Driver

    Dewalt DCD970KL 18V 1/2'' XRP™ LiIon Hammerdrill Drill Driver

    extended run-time batteries provide superior ergonomics, long run-time & battery life* Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time* Heavy-duty 1/2" self-tightening chuck tightens throughout operation providing superior bit

    $329.00
  • Items 1 - 24 of 30
  • Page:
    1. 1
    2. 2
Feedback X