Blade Gauge

  • Items 1 - 24 of 99
  • Page:
    1. 1
    2. 2
    3. 3
  1. Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Get the tool alignment and adjustment gauge Fine Woodworking magazine calls "the best we've seen." From spindle and arbor runout to blade alignment, dado depth, router bit height and more, the Betterley UNA-GAUGE packs an amazing range of measurement capabilities into a single tool. Features:*…

    3 Review(s)
    $199.99
  2. Kreg® Precision Setup Bars

    Kreg® Precision Setup Bars

    …adjustments* Step gauge: Test the depth of your cut after each pass* Seven set-up bars: 1/8" (.125), 3/16" (.188), 1/4"(.250), 5/16" (.313), 3/8" (.375), 7/16" (.438), 1/2" (.500)* Each individual bar is made from soft aluminum designed to prevent damage to your router bit or saw blade in case they…

    3 Review(s)
    $41.99
  3. Wixey Digital Angle Gauge

    Wixey Digital Angle Gauge

    …calibrates the gauge to any reference surface.* No more errors in parallax from reading the angle gauges on your miter saw.* Includes 3.0V battery.* Digital gauge with large easy-to-read LCD.* Built-in super strong magnets secure the angle gauge to any ferrous metal saw blade.* 0.1° resolution.*…

    136 Review(s)
    $39.99
  4. Wixey 3'' Digital Protractor

    Wixey 3'' Digital Protractor

    …in a tight spot. Use it for a variety of applications, from measuring and layout to setting miter and bevel angles. And with magnets on every blade edge, it's especially easy to use on metal. It also features a convenient tightening mechanism for holding measurements. Protractor shuts off…

    5 Review(s)
    $52.99
  5. Wixey™ Mini Digital Height Gauge

    Wixey™ Mini Digital Height Gauge

    …inch! This compact gauge includes a digital readout in metric or imperial as well as a steel rule. Measures from 0 to 3.2" (0-83mm). Perfect for measuring the height of router bits and saw blades, or measuring for placement of a dado with greater accuracy. Magnetic feet make the gauge self-standing…

    13 Review(s)
    $25.99
  6. Depth Gauge

    Depth Gauge

    Metal rule depth gauge helps set the height of router bits and saw blades with greater accuracy.* Self-standing for setting cutter depth on router tables and low profile for backfence adjustment. * Horizontal and vertical measuring.* For hand routers, router tables and table saws.* With 2-3/8" wide…

    $16.49
  7. Digital Sliding T-Bevel Gauge

    Digital Sliding T-Bevel Gauge

    …display button, locking knob or manual measurement transfer, four function control buttons, and an auto shut-off feature. 8" stainless steel blade with impact-resistant ABS handle. Includes one CR2032 3V lithium battery. Technical Details:* 2-in-1 tool takes the guesswork out of angle measurement…

    5 Review(s)
    $36.99 $24.99

    SAVE 32%

  8. Nova 10-in-1 Chuck Gauge

    Nova 10-in-1 Chuck Gauge

    This tool combines all of the turner's most commonly used gauges into one efficient device. It includes a dovetail gauge, diameter gauge, center finder, dowel gauge, angle checker, dovetail marking tool, ruler, protractor and faceplate marking tool. With over 10 functions, you'll work faster and…

    $13.99
  9. 45/90 Degree Layout Miter Gauge

    45/90 Degree Layout Miter Gauge

    …this precise gauge also works to prep saw blades or drill presses for angled jobs. A balanced, wide-face design adds remarkable stability, while interior windows make marking parallel lines fast and easy. Made from solid, lightweight aluminum. Use this versatile gauge for precise 45°…

    5 Review(s)
    $27.99
  10. Digital Angle Gauge w/Flip-Out Display

    Digital Angle Gauge w/Flip-Out Display

    …items), zero the gauge, then set the gauge on your table and adjust the angle as desired. Of course, it also works perfectly for leveling machinery. Features: * Flip-out display for easy readability from many angles.* Super strong magnets securely attach the gauge to saw blades and other metallic…

    $49.99
  11. Kreg™ Precision Miter Gauge System

    Kreg™ Precision Miter Gauge System

    …quick, foolproof position changes at 0°, 10°, 22-1/2°, 30° and 45°.* Precision flipstop precisely measures distance from the blade; curved face self-elevates to bypass the stop.* Precision 24" long, 3/4" aluminum bar contains five bar adjusters to eliminate play in the miter…

    13 Review(s)
    $139.00
  12. 45/90 Degree Stainless Steel Miter Gauge

    45/90 Degree Stainless Steel Miter Gauge

    Used for precise 45° and 90° reference, this solid steel gauge has applications allover the shop. Lay out miters for picture frames or trim; set blade angles; check corners for square — the possibilities are endless. A sturdy base allows it to stand upright. Interior windows add…

    4 Review(s)
    $27.99
  13. 45 Degree Stainless Steel Miter Gauge

    45 Degree Stainless Steel Miter Gauge

    This solid steel gauge is perfect for quick miter layout and tool setup. Mark 45° linesfor picture frames, corner molding, box constructions and more. Stand it upright andprep saw blades or drill press tables for angled applications. The interior windowmakes marking parallel lines fast and easy.…

    $16.99
  14. Porter-Cable 18 Gauge 2'' Brad Nailer Kit

    Porter-Cable 18 Gauge 2'' Brad Nailer Kit

    …project. TheBN200C also comes equipped with a low-nail reload indicator to remind youwhen it's time to reload, and boasts a special hardened driver blade for a long,useful life. Includes 500 nails, a carrying case, and an owners manual. Technical Details:* Long life maintenance-free motor to keep…

    0 Review(s)
    $81.99
  15. iGaging 12'' Center Rule & Angle Gauge

    iGaging 12'' Center Rule & Angle Gauge

    …The 12" Center Rule/Angle Gauge is made of hardened stainless steel.* Clear 1/2 degree marks and 1/4 degree dots on the angle gauge for easy reading.* All corners are square, so the rule can be used for drawing parallel and square lines, and for squaring saw blades.* Range: 0-12" / 0-50 degrees

    $19.99
  16. Jet® FS-1652H Foot Shear, 52'' x 16 Gauge

    Jet® FS-1652H Foot Shear, 52'' x 16 Gauge

    …during operation to prevent errors, while back and front gauges allow precise, repeatable cuts. * Ideal for precision shearing of mild steel up to 16 gauge* Dual-sided blades provide twice the cutting life* Upper blade is two-way; bottom blade is one-way* 2° angle cutting edge; 1° face…

    $2,399.00
  17. iGaging 6'' MiniMag Magnetic Fractional Digital Height Gauge

    iGaging 6'' MiniMag Magnetic Fractional Digital Height Gauge

    …powerful magnetic base on this height gauge clamps itself to any ferrous metal surface for setting the precise height of your saw blade, dado blade or router bit with an accuracy of 0.001". Also great for aligning jointer knives. The MiniMag Digital Height Gauge features a large LCD display with…

    2 Review(s)
    $49.99
  18. Porter-Cable 18 Gauge 1-3/8'' Brad Nailer Kit, While Supplies Last!

    Porter-Cable 18 Gauge 1-3/8'' Brad Nailer Kit, While Supplies Last!

    Porter Cable's BN138 1-3/8" Brad Nailer pairs a maintenance-free motor with a hardened driver blade for long life and an internal piston catch for consistent power. It also boasts tool-free depth-of-drive adjustments with convenient detents to dial in your setting quickly. The removable…

    $74.99
  19. Porter-Cable 16 Gauge 2-1/2-inch Finish Nailer Kit (FN250C)

    Porter-Cable 16 Gauge 2-1/2-inch Finish Nailer Kit (FN250C)

    …located behind driver guide for better visibility* Adjustable belt hook* Integrated rubber grip for improved comfort* Special hardened driver blade* Strong, lightweight, die-cast aluminum housing Specifications:* Magazine Capacity: 100 Nails* Firing Modes: Sequential Fire* Jam Clearance: Front…

    $169.99
  20. Dewalt DC490KA Heavy-Duty 18V Cordless 18 Gauge Swivel Head and Shear Kit

    Dewalt DC490KA Heavy-Duty 18V Cordless 18 Gauge Swivel Head and Shear Kit

    Heavy-Duty 18V Cordless 18 Gauge Swivel Head and Shear Kit * 3 Year Limited Warranty* Powered by the DEWALT 18V "system" of battery packs* Head swivels 360¦ which allows user to access tight quarters while maintaining comfort* Cuts 7/32" strip which continuously curls out of the cutting area…

    $400.99
  21. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    …making long, straight cuts* Magnetic blade storage drawer so you're ready for every cutting situation* Combination miter gauge and rip fence for angled cuts and long, straight cuts* Variable speed motor for controlled cuts* Adjustable safety guard covers the blade* Rockwell's highest professional…

    21 Review(s)
    $178.99
  22. Bosch T-Shank Fine Cut Jig Saw Blades

    Bosch T-Shank Fine Cut Jig Saw Blades

    Bosch T-Shank Fine Cut Jig Saw Blades are ideal for cutting sheet metal 10-16 gauge, ferrous and non-ferrous, metals 1/16'' to 1/8'' thick. The 17-24 TPI progressive tooth design provides for smooth cuts in various thicknesses.

    $11.49
  23. Fein MultiMaster HSS Saw Blade, Wood, with Depth Stop, 32607065020

    Fein MultiMaster HSS Saw Blade, Wood, with Depth Stop, 32607065020

    The Fein HSS Saw Blade is ideal for making precise long cuts as well as for installing parquet, laminate and wall panels. The included depth stop helps you accurately gauge depth when sawing. The HSS Saw Blade is for use the Fein MultiMaster Tool. Technical Details:* 4" Diameter* Cuts wood, parquet,…

    $88.99
  24. Mini Combo Miter Saw Set

    Mini Combo Miter Saw Set

    …kerf saw blade has 42 teeth per inch and can cut material up to 2 inches wide and 15/16" thick. The miter box has preset slots for 30°, 45° and 90° angles. Technical Details:* Saw blade measures 6-1/2" long x 1-3/16" deep* Miter box measures 6-1/2" long* 42 TPI Blade* Blade is not…

    5 Review(s)
    $21.99
  • Items 1 - 24 of 99
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X