Block Oil

  • Grid List
  • Page:
    1. 1
  • Items 1 - 10 of 10
  • Page:
    1. 1
  1. Butcher Block Oil

    Butcher Block Oil

    Safe for butcher blocks, cutting boards, wood utensils, salad bowls and other wood surfaces. A completely natural oil that meets all FDA requirements for surfaces that contact food. Deeply penetrates and protects wood. Easy to apply- just wipe or brush on liberally, let penetrate for 5 minutes and…

    3 Review(s)
    $8.99
  2. Pumice Stone, Rotten Stone and Felt Blocks-Application Blocks (Sold Separately)

    Pumice Stone, Rotten Stone and Felt Blocks-Application Blocks (Sold Separately)

    …blemishes and dents. Use a felt application block (#58271 or 58289) to rub onto the surface. Rotten stone is a finer grit than Pumice stone. Use Rotten stone after Pumice stone to achieve a higher gloss. Can be used with water or a rubbing oil. Water gives a faster cutting action. Technical…

    8 Review(s)
    From: $8.79
  3. Butcher Block Conditioner

    Butcher Block Conditioner

    Treat your butcher blocks, cutting boards, turned bowls and utensils to specialized wood care with this conditioner. Food-grade mineral oil penetrates deep and, along with water-resistant beeswax and carnauba wax, rejuvenates wood and prevents drying and cracking. The antibacterial waxes help repair…

    6 Review(s)
    $9.99
  4. Mahoney's Food-Safe Fine Finishes

    Mahoney's Food-Safe Fine Finishes

    …such as bowls, butcher blocks and utensils. Heat-treated walnut oil Utility Finish hardens to a beautiful satin finish. Follow with Oil Wax Finish for a satin sheen. Made from beeswax, carnauba wax and walnut oil. Technical Details:* Utility Finish hardens to a satin finish.* Oil Wax Finish is best…

    1 Review(s)
    $15.99
  5. Salad Bowl Finish

    Salad Bowl Finish

    …Dried film is non-toxic for food contact 72 hours after drying. Additional coats can be reapplied at any time if maintenance of item becomes necessary. For actively used butcher blocks that are used for chopping and cutting, only use Butcher Block Oil (Product #15950). Available in pints and quarts.

    29 Review(s)
    From: $12.99
  6. Bloxygen Gas for Preserving Unused Finishing Materials

    Bloxygen Gas for Preserving Unused Finishing Materials

    …your container. Simply blow the oxygen out of your container with Bloxygen and then seal the lid. The heavy, inert Bloxygen gas sinks down to block oxygen from the liquid surface. Because Bloxygen is heavier than air, it will separate the liquid surface from any air that may remain in the container,…

    7 Review(s)
    $11.99
  7. Pumice Stone, Regular Grit, 1 Pound

    Pumice Stone, Regular Grit, 1 Pound

    …blemishes and dents. Use a felt application block (#58271 or 58289) to rub onto the surface. Rotten stone is a finer grit than Pumice stone. Use Rotten stone after Pumice stone to achieve a higher gloss. Can be used with water or a rubbing oil. Water gives a faster cutting action. Technical…

    8 Review(s)
    $8.99
  8. Rotten Stone, 1 Pound

    Rotten Stone, 1 Pound

    …blemishes and dents. Use a felt application block (#58271 or 58289) to rub onto the surface. Rotten stone is a finer grit than Pumice stone. Use Rotten stone after Pumice stone to achieve a higher gloss. Can be used with water or a rubbing oil. Water gives a faster cutting action. Technical…

    8 Review(s)
    $9.99
  9. 3/4'' Air Outlet Kit for RapidAir Maxline Compressed Air System M7510

    3/4'' Air Outlet Kit for RapidAir Maxline Compressed Air System M7510

    …included. Technical Details:* Aluminum outlet block measures 3.5"H x 3"W x 2"D.* Outlet is ported on the top and the back for rear entry.* Constructed of anodized aluminum.* Moisture drain prevents corrosion.* Compatible with most compressor oils.* 1/2" female NPT outlet port accepts quick connector…

    $29.99
  10. Buffer's Polish

    Buffer's Polish

    …Designed to replace the traditional "tripoli and oil" final rub on gloss finishes.* Contains no silicones or waxes that could interfere with additional finish coats, touch-up or refinishing.* May be applied with a soft cloth, felt rubbing block or a low-speed electric buffer. Please note that this…

    2 Review(s)
    $16.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 10 of 10
  • Page:
    1. 1
Feedback X