Bowl Turning Gouge

  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
  1. Ellsworth Signature Gouge

    Ellsworth Signature Gouge

    …versatile 5/8" bowl gouge on the market - with the edge and balance needed for the finest projects! * Designed by David Ellsworth with a parabolic flute and specific tip shape. * Allows you to make huge roughing cuts and delicate finish cuts on both the inside and outside of open bowls and hollow…

    $120.99
  2. Fingernail Bowl Gouges 842F for Sorby Sovereign Turning System-Tools

    Fingernail Bowl Gouges 842F for Sorby Sovereign Turning System-Tools

    Make rounder, smoother bowls with these high quality Sorby gouges. Use with the Sorby Sovereign Handle (sold separately) for maximum control and stability. 3/8" and 1/2" gouges are both compatible with the Sovereign Handle and its included collet adapters.

    From: $46.99
  3. Robert Sorby Bowl Gouges-Standard Bowl Gouges

    Robert Sorby Bowl Gouges-Standard Bowl Gouges

    Robert Sorby bowl gouges are a must in the tool kit of every bowl turner. Throughout the world, the name Robert Sorby is synonymous with all that is good in woodturning and Robert Sorby turning tools remain the benchmark by which all others are judged. Robert Sorby bowl gouges are a must in the tool…

    3 Review(s)
    From: $79.99
  4. Robert Sorby Bowl Gouges-Fingernail Bowl Gouges

    Robert Sorby Bowl Gouges-Fingernail Bowl Gouges

    Robert Sorby bowl gouges are a must in the tool kit of every bowl turner. Throughout the world, the name Robert Sorby is synonymous with all that is good in woodturning and Robert Sorby turning tools remain the benchmark by which all others are judged. Robert Sorby bowl gouges are a must in the tool…

    4 Review(s)
    From: $69.99
  5. 3/4" Robert Sorby #843H Roughing-Out Gouge

    3/4" Robert Sorby #843H Roughing-Out Gouge

    turning of uneven or square stock to round. Recommended for the initial turning of uneven or square stock to round. The shape of the roughing-out gouge enables the tool to cut safely with the wings (the name given to the tips of the side walls) well back from the workpiece. Not for use on bowl grain…

    1 Review(s)
    $79.99
  6. 1-1/4" Robert Sorby #843LH Roughing-Out Gouge

    1-1/4" Robert Sorby #843LH Roughing-Out Gouge

    turning of uneven or square stock to round. Recommended for the initial turning of uneven or square stock to round. The shape of the roughing-out gouge enables the tool to cut safely with the wings (the name given to the tips of the side walls) well back from the workpiece. Not for use on bowl grain…

    1 Review(s)
    $138.99
  7. Pro-PM Powder Metallurgy High Speed Steel Spindle Gouge

    Pro-PM Powder Metallurgy High Speed Steel Spindle Gouge

    Make turning a little easier and a lot more fun with Crowns exclusive Pro-PM Powder Metallurgy High Speed Steel Spindle Gouge! This gouge is the "elite' of all turning gouges. Made from an advanced Powder Metal, the molten steel has been compressed and sintered giving this Pro-PM turning tool a…

    $83.99
  8. DVD - Turning Bowls with Richard Raffan

    DVD - Turning Bowls with Richard Raffan

    Internationally acclaimed turner and teacher Richard Raffan shows how to turnspectacular bowls on a lathe. Explore topics such as preparing bowl blanks, sharpeningtools, using bowl gouges and scrapers, sanding, finishing and more. Running time: 120minutes.

    $20.99
  9. Bowl Turning, Fine Woodworking DVD

    Bowl Turning, Fine Woodworking DVD

    …hold tools, grind and modify chisels and gouges, mount bowl blanks on the lathe, rough out the bowl shape, work end grain, control warp in thin-walled bowls, and design bowl forms.* Del Stubbs has been a turner and teacher for more than 30 years.* He turns everything from architectural spindles and…

    2 Review(s)
    $20.99
  10. Crown 3-piece Turning Set

    Crown 3-piece Turning Set

    …pens and similar projects with this Crown 3-piece Turning Set. Tools are pre-honed and pre-sharpened. Ready to use straight from the box. Technical Details:* Tools are pre-honed and pre-sharpened.* 1/4" Bowl gouge* 1/2" Oval skew chisel gouge* 1/8" Parting tool* All are made of high speed steel…

    1 Review(s)
    $100.99
  11. Woodworker's Journal Turning Projects CD

    Woodworker's Journal Turning Projects CD

    …uncommon) turning chucks! Articles/Projects included on this CD:* Choosing Your Lathe* Our Top Ten Turning Safety Tips* Anatomy of a Bowl* Sharpening a Bowl Gouge* Attaching Bowl Blanks with Glue Blocks* Tips for the Skew-Chisel Challenged* Shaker Sewing Stand* Mastering Turned Eggs* Turned Fishing…

    $13.69
  12. Crown 1/2' 13mm Powder Metallurgy Bowl Gouge, 242PM

    Crown 1/2' 13mm Powder Metallurgy Bowl Gouge, 242PM

    Make turning a little easier and a lot more fun with Crowns exclusive Pro-PM Powder Metallurgy High Crown 242PM 1/2" 13mm Bowl Gouge! This gouge is the "elite' of all turning gouges. Made from an advanced Powder Metal, the molten steel has been compressed and sintered giving this Pro-PM turning tool…

    $102.99
  13. Tormek Turning Tool Setter TTS-100

    Tormek Turning Tool Setter TTS-100

    …sharpness on your woodturning tools! Allows you to quickly and easily keep your turning tools sharpened to factory specifications.Replicate in seconds the exact shape and edge angle on your bowl and spindle gouges, as well as flat or oval skew chisels with either a straight or curved edge. Technical…

    0 Review(s)
    $33.00
  14. Carter Hollow Roller™ Vessel Turning System

    Carter Hollow Roller™ Vessel Turning System

    Hollowing out a vessel or bowl just got a lot safer and easier with the Carter Hollow Roller™ Vessel Turning System! The patent pending system uses a captive bar tool allowing you to focus on your work, and safely turn hollow forms and bowls using your own gouges and scrapers. The fully sealed…

    1 Review(s)
    $358.99
  15. 6-Piece Sorby Turning Tool Set

    6-Piece Sorby Turning Tool Set

    …Sorby tool is carefully hardened and tempered to its specific set of needs, and the handles are guaranteed to never loosen. Includes a 3/4'' roughing gouge, 3/8'' bowl gouge, 3/8'' spindle gouge, 1/2'' round-nose scraper, 3/4'' skew with oval shank and 1/8'' parting tool. Made in Sheffield, England.

    $286.99
  16. Turning Wood, Fine Woodworking DVD

    Turning Wood, Fine Woodworking DVD

    …use a skew chisel with ease, manipulate gouges effectively, secure stock on the lathe, turn spindles and other centerwork, and make a simple bowl.* Richard Raffan is an internationally acclaimed turner and teacher. He is the author of Turning Wood, Turning Projects, Turning Boxes and Turning Bowls.

    2 Review(s)
    $19.95
  17. Tormek Woodturner's Accessory Kit TNT-708

    Tormek Woodturner's Accessory Kit TNT-708

    Shape and sharpen all your turning tools with this Tormek Woodturner's Accessory Kit (TNT-708)! You get Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with…

    1 Review(s)
    $324.00
  18. Tormek® Magnum Bundle

    Tormek® Magnum Bundle

    …Accessory Kit Details:* Shape and sharpen all your turning tools* Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges - maximum tool width is 25mm* Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools* Turning Tool Setter (TTS-100T) with built-in edge…

    $1125.00
  19. Tormek® Ultimate Bundle

    Tormek® Ultimate Bundle

    …Accessory Kit Details:* Shape and sharpen all your turning tools* Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges - maximum tool width is 25mm* Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools* Turning Tool Setter (TTS-100T) with built-in edge…

    $1307.00
  20. 3-Piece Robert Sorby Woodturning Set with DVD

    3-Piece Robert Sorby Woodturning Set with DVD

    …Robert Sorby 843H 3/4" Roughing Gouge:* Recommended for initial turning of uneven or square stock to round.* Shape enables the tool to cut safely with the wings (the name given to the tipsof the side walls) well back from the workpiece.* Not for use on bowl grain projects.* Overall length:…

    $129.99
  21. Robert Sorby Micro Sandmaster Set

    Robert Sorby Micro Sandmaster Set

    …your ticket to smoothing hard-to-reachareas in delicate bowls, vases, and other hollow turnings. Includes a fullyadjustable head, eight versatile adhesives, and a modular aluminum handle thataccepts a wide range of blades and other turning attachments. Position the fully-adjustable head at any angle…

    $62.99
  22. Oneway Wolverine Grinding Jig

    Oneway Wolverine Grinding Jig

    …your gouges, chisels, scrapers, parting tools, skews and carving tools. * Designed to sharpen traditional bowl gouges and other curved chisels with straight edges such as roughing and spindle gouges.* Can be used with most shop grinders.* Oneway recommends using an 8" dia. wheel turning at the…

    $104.99
  23. Oneway Wolverine Vari-Grind 2 Jig

    Oneway Wolverine Vari-Grind 2 Jig

    …instructional DVD. Technical Details:* Designed to sharpen spindle gouges and bowl gouges with fingernail profiles and side grind profiles.* Can be used with most shop grinders.* Oneway recommends using an 8" dia. wheel turning at the standard 3450 RPM.* The Vari-Grind 2 restrains tool motion in…

    $74.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
Feedback X