Box Lid Support

  • Items 1 - 24 of 44
  • Page:
    1. 1
    2. 2
  1. Toy Box Lid Supports-Back Mount

    Toy Box Lid Supports-Back Mount

    …toy boxes, lid supports prevent chest lids from accidentally slamming shut on fingers. Lid supports feature a solid brass slide with a statuary bronze finish. Available in center/back-mount configuration in three load ratings. Technical Details * Allows lid to open to 85 degrees * Use on boxes with…

    105 Review(s)
    $10.29
  2. Self Balancing Lid Support-Select"  lbs. weight you need

    Self Balancing Lid Support-Select" lbs. weight you need

    An adjustable spring loaded support holds lids in open position. Surface mounts only 4-1/2" from back of the cabinet. Statuary bronze finish. (Lid weight times front to back size) divided by 2 equals" pounds range. Use on toy boxes with 3/4" thick backs. Price per pair.

    2 Review(s)
    $38.59
  3. Lift-O-Mat® Gas Spring Lid Support

    Lift-O-Mat® Gas Spring Lid Support

    Effortless opening of doors and lids! Gas springs are the ideal choice for cabinet doors and lid supports that open upward. You'll get soft and quiet closing, plus smooth motion and stopping. Each set includes two gas springs and four mounting brackets. (Screws not included). Available in Black…

    21 Review(s)
    $48.29
  4. Friction Lid Supports-Curved

    Friction Lid Supports-Curved

    Curved Friction - Use in cabinets where depth is limited. Works in boxes as shallow as 2-1/2". Brass finished steel. Screws included. 5-1/2" overall. Price for one support.

    2 Review(s)
    $6.79
  5. Solid Brass Side Rail Hinges with Lid Support

    Solid Brass Side Rail Hinges with Lid Support

    …for your finest music boxes, jewelry boxes, humidors, and all other small boxes and cases. These deluxe solid brass hinges are gold-plated for a beautiful finish that will complement your best woodworking projects. An integral lid support keeps heavier duty small-box lids propped open. Technical…

    3 Review(s)
    $52.99
  6. Large Lid Support

    Large Lid Support

    Great for many uses, such as large boxes and display cases.* Special mounting plates allow for smooth movement.* Measures 9-5/8" overall.

    3 Review(s)
    $5.69
  7. Soft Down Lid Support

    Soft Down Lid Support

    Lids lower gently--never crushing fingers. Support opens lids to a maximum angle of 105° and is 8-7/8" long overall. They have nickel plated steel arms with cream colored plastic housing. Compact design makes these supports ideal for installing in tight places. Use one support per 43 inch/lbs.…

    24 Review(s)
    $27.29
  8. Basic Economy Drop Front Support

    Basic Economy Drop Front Support

    Simple elbow jointed arm is easy to install. Short arm is 5" and long arm is 6". Made of brass-plated steel. Price for each. Great for straight or slant front secretaries.

    2 Review(s)
    From: $10.39
  9. Small Box Lid Support

    Small Box Lid Support

    Reversible support is made of attractive brass plated steel. Note: For use on box lids only, not for use with flat top lids.

    3 Review(s)
    $8.39
  10. Decorative Chain Support

    Decorative Chain Support

    This decorative chain is the ideal way to support and dress up a box or chest lid. Chain and mounting hardware are brass plated and polished. Measures 7-3/4" long with 5/16" x 1" mounting plates. Technical Details* Brass plated chain and mounting hardware* Chain is 7-3/4" long* Includes #4 x 5/8"…

    11 Review(s)
    $15.39
  11. Stopmatic Support With Catch

    Stopmatic Support With Catch

    …controls lowering of the drop front. Comes with magnetic catch to help keep door closed. Can be used in left or right hand installations by reversing position of foot and catch as needed. Nickel plated die-cast steel. Includes screws. Recommended for lids of 14" minimum height to 18" maximum height.

    5 Review(s)
    $15.99
  12. Solid Brass Hardware-Choose right or left hand

    Solid Brass Hardware-Choose right or left hand

    Works as either a lid support or drop front. Study construction. Solid brass with a polished, lacquered finish. Dual purpose lid support or drop front. (right and left hand are designated by drop front use as you face the desk). Overall length is 9-3/4" . Each arm is 4-7.8" long.

    9 Review(s)
    $31.49
  13. Brusso Jewelry Box Lid Support

    Brusso Jewelry Box Lid Support

    Small version of brass mortised support. Cut a mortise 1/4" wide x 2-7/8" long x 1/2" deep to install. Solid brass. Cut a mortise 1/4" wide x 2-7/8" long x 1/2" deep to install. Solid brass.

    5 Review(s)
    $27.49
  14. Brusso Solid Brass Small Box Stop Hinges

    Brusso Solid Brass Small Box Stop Hinges

    Working like a support, these solid brass hinges can hold lids open beyond a vertical position, up to 95°. Excellent for all small-box applications, including your most special products. Listed width per single leaf and in closed position. Price per pair Sizes below list leaves in closed…

    2 Review(s)
    From: $30.99
  15. Soft Down Lid Supports

    Soft Down Lid Supports

    …60-86" /pound per support and 121-173" /pound per pair (formula: lid wt. x front-to-back size ÷ 2 =" /pounds), these supports offer the security of gentle descent for applications with top-opening flap door. Opening to 70°, they are ideal for both overlay and inset lids. Requires 5-1/8" x…

    18 Review(s)
    $25.49
  16. Vertex Solid Extruded 90° Stop Hinges-Polished Brass Finish

    Vertex Solid Extruded 90° Stop Hinges-Polished Brass Finish

    When you need a solid box hinge, look no further than these Vertex Solid Extruded 90° Stop Hinges! Machined to exact specifications, these high-quality extruded solid brass hinges deliver the strength and performance you're looking for. Polished Brass Finish in 1-1/2" x 1-1/8" and 2" x 1-1/2".…

    2 Review(s)
    From: $25.99
  17. Trunk Lid Support-Select finish

    Trunk Lid Support-Select finish

    Designed for trunks and chests with box style lids. Holds lid secure in open position when needed. Plated steel support measures 6-7/16" center to center and 6-7/8" long overall. 7/16" wide. Screws included. Price per pair.

    5 Review(s)
    From: $7.99
  18. Steamer Trunk Brass Plated Hardware Kit

    Steamer Trunk Brass Plated Hardware Kit

    …handles. The #94441-Brass Plated hardware kit contain:* 2 each of Item #47087 Leather Trunk Handles in Black* 1 pair of Item #23713 Trunk Lid Support in Brass* 1 pair of Item #89921 Classic Oblong Catches Brass plated * 1 pair of Item #90134 90° Stop Hinges Brass plated, 2-19/32" x 1-17/32"*…

    $81.39
  19. Click-N-Carve CNC Carving Machine BE2015

    Click-N-Carve CNC Carving Machine BE2015

    …Click-N-Carve BE2015. Affordable, accessible and intuitive, the Click-N-Carve is the very definition of easy-to-use: simply load your photo, close the lid, and with only a few clicks, the BE2015 will be quietly churning out a carved replica of your photo in vivid three-dimensional detail. With its…

    3 Review(s)
    $1599.99
  20. Easy-Lift Lid Support

    Easy-Lift Lid Support

    By rear-mounting this lid support and placing it at least 6" from the edge of the lid, you'll get added safety and smooth lift-up action. For use on boxes and chests with 3/4" backs. Most lids require only one support, but two can increase the weight capacity. Zinc mounting brackets; black nylon…

    8 Review(s)
    $13.69
  21. Surface Mounted Hinge.

    Surface Mounted Hinge.

    A 90° stop holds lids in a secure upright position, which is perfect for hampers and boxes.* Spring-closing overlay hinge.* Hinge doubles as a lid support.* Price per pair.

    2 Review(s)
    $13.29
  22. Lid-Stay Torsion Hinge Lid Support, Satin Nickel

    Lid-Stay Torsion Hinge Lid Support, Satin Nickel

    …to boxes, to storage units, and more! Designed to fit 3/4" thick stock. Hinges are available in 15, 30, 40, and 60 inch-pound ratings. Screws included. * Support any size lid by simply adding more hinges.* Safe for toy box lids and perfect for cedar chests.* Unique torsion mechanism holds lid in any…

    40 Review(s)
    From: $24.99
  23. Vertex Small Box Hinges

    Vertex Small Box Hinges

    Beautiful and distinctive. Perfect for all small box applications like jewelry boxes. Use when standard hinges just won't do. These Vertex fixed pin lid support hinges are available in either brass or satin nickel finish. Full 1/16" thick with 1/4" knuckle. Screws included.

    4 Review(s)
    From: $26.29
  24. Decorative 90° Stop Hinges

    Decorative 90° Stop Hinges

    …make this decorative hinge an easy, affordable option for use on jewelry boxes and other small boxes. No need to mortise, and no need for a lid support or chain - just fasten the hinges directly to the rear face of your box with the included screws. Sold in pairs. Made in USA. Technical Details:*…

    $2.49
  • Items 1 - 24 of 44
  • Page:
    1. 1
    2. 2
Feedback X