Burr

  • Grid List
  • Page:
    1. 1
  • Items 1 - 19 of 19
  • Page:
    1. 1
  1. Work Sharp™ WS3000 Tool Sharpener

    Work Sharp™ WS3000 Tool Sharpener

    …HP motor with 580 RPM wheel speed.* Sharpening port lapping surface features "plunge-pull" sharpening technique.* Sharpening port abrasive increases burr removal and speeds sharpening.* Adjustable top tool rest makes freehand sharpening easier and more precise.* T-slot mounting system lets you mount…

    54 Review(s)
    $199.99
  2. Profiled Leather Wheel LA-120 for Tormek T-7 Sharpening Systems

    Profiled Leather Wheel LA-120 for Tormek T-7 Sharpening Systems

    …specifically for the Tormek T-7 Sharpening System, this wheel has exchangeable leather discs so you can easily replace a disc with a worn tip. The two standard discs have a radius of 3 mm (1/8") and a 60° tip. Removes the burr and polishes the inside on turning and carving gouges and V-tools.

    1 Review(s)
    $64.00
  3. Starrett® Dual Cut™ Bi-Metal Jig Saw Blades

    Starrett® Dual Cut™ Bi-Metal Jig Saw Blades

    Cut cleanly on both sides of your stock with innovative Starrett® Dual Cut™ Bi-Metal Jig Saw Blades! These unique blades combine bi-metal technology with an exclusive pattern of teeth in both directions for a burr-free cut on both sides of the stock. Use them to easily cut intricate shapes…

    From: $8.69
  4. Crown Burnisher

    Crown Burnisher

    Hardened steel burnishers are the preferred tool for putting a razor-sharp burr edge on cabinet and card scrapers. This Crown round burnisher features a polished M2 HSS (high speed steel) rod fitted with a beautiful rosewood handle for comfortable, effective burnishing. Technical Details * 6-1/2" x…

    2 Review(s)
    $28.99
  5. Tormek Honing Compound (PA-70) (Tube)

    Tormek Honing Compound (PA-70) (Tube)

    Use with the leather honing wheels on Tormek Sharpening Systems to remove the burr of a sharpened tool and polish the edge to a mirror finish. Grain size 3 micron (average). Approximately 2.5 oz.

    $10.00
  6. Norton® Bluefire™ Reinforced Chop Saw Cut-Off Wheel, 14'' Dia. x 7/64'' Thick x 1'' Hole

    Norton® Bluefire™ Reinforced Chop Saw Cut-Off Wheel, 14'' Dia. x 7/64'' Thick x 1'' Hole

    …aluminum oxide. The wheels are centrally reinforced and sandwiched by exposed rough sides for free-cutting, non-binding applications where minimal burr and burn are the key requirements. * Use with a chop saw* Centrally reinforced* Type 01 wheel shape (flat)* Ideal for mild carbon/high tensile…

    $24.99
  7. Work Sharp WS2000 Tool Sharpener

    Work Sharp WS2000 Tool Sharpener

    …the temper will be unaffected.* Sharpening port lapping surface features "plunge-pull" sharpening technique.* Sharpening port abrasive increases burr removal and speeds sharpening.* Adjustable top tool rest makes freehand sharpening easier and more precise.* With bench mounting tabs for easy…

    18 Review(s)
    $79.99
  8. Surface Conditioning Wheel for Work Sharp™ Tool Sharpener

    Surface Conditioning Wheel for Work Sharp™ Tool Sharpener

    This pliable wheel helps give old or rusty tools a like-new shine. Use it to removepaint, rust and burrs — or even for light sanding. Includes medium density nonwovensurface conditioning wheel and top knob assembly. Works with both WS2000and WS3000 systems.

    $19.95
  9. Rockler 3-Piece Mortise Chisel Sharpening Set

    Rockler 3-Piece Mortise Chisel Sharpening Set

    …shape puts the final edge on inside bevels. Sharpens mortising chisels up to 1/2" size.Set includes: * Ergonomic handle for comfortable, slip-resistant gripping power. * 1/4" quick-change chuck * Coarse 220 grit cone for removing nicks and burrs * Fine 600 grit cone for final honed cutting edge.

    20 Review(s)
    $49.49
  10. Freud® 41-502 Radius Laminate Trim Router Bit - 1/2" Dia x 3/8" H x 1/4" Shank

    Freud® 41-502 Radius Laminate Trim Router Bit - 1/2" Dia x 3/8" H x 1/4" Shank

    …plastic laminate edges in a fraction of the time that it takes to hand file them. Plus, the 1/16" radius gives you a silky smooth edge with no burrs or sharp spots. It's ideal for countertop-grade laminates including Formica®, Wilsonart® and similar materials. Use with hand-held routers,…

    $29.47
  11. Festool Carvex Accessory Kit

    Festool Carvex Accessory Kit

    …chips that may scratch the cutting surface. Steel Base Insert (497300)* For use when cutting metals and metal-like materials.* Protects base from burrs while cutting metal. StickFix Base Insert (497301)* Uses easy-to-install hook and loop felt pads.* Felts protect delicate surfaces from potential…

    $200.00
  12. Norton® Metal™ Straight Reinforced Cut-Off Wheel, 4-1/2'' Dia. x 0.040'' Thick x 7/8'' Hole

    Norton® Metal™ Straight Reinforced Cut-Off Wheel, 4-1/2'' Dia. x 0.040'' Thick x 7/8'' Hole

    Cut-off wheels from the Norton® Metal™ line deliver consistent burn-free and burr-free performance with a low initial cost. Designed for all steel and ferrous metals, they are formulated from aluminum oxide using a finer grit mixture that limits premature shedding or spalling, extends the…

    $2.49
  13. Norton® Metal™ Straight Reinforced Cut-Off Wheel, 3'' Dia. x 0.035'' Thick x 3/8'' Hole

    Norton® Metal™ Straight Reinforced Cut-Off Wheel, 3'' Dia. x 0.035'' Thick x 3/8'' Hole

    These Norton small diameter cut-off wheels are an ultra-thin .035'' thick (about 1/32'') for quick burn-free and burr-free cutting. They excel at cutting sheet metal, pipe, and dimensioning metal plate, and are designed to be used with a die grinder. All are fully reinforced with fiberglass for the…

    $1.99
  14. Norton® Gemini® Straight Reinforced Cut-Off Wheel, 3'' Dia. x 0.060'' Thick x 3/8'' Hole

    Norton® Gemini® Straight Reinforced Cut-Off Wheel, 3'' Dia. x 0.060'' Thick x 3/8'' Hole

    These Norton small diameter cut-off wheels are .060'' thick (about 1/16'') for quick burn-free and burr-free cutting. They excel at cutting sheet metal, pipe, and dimensioning metal plate, and are designed to be used with a die grinder. All are fully reinforced with fiberglass for the demanding…

    $3.99
  15. Norton® Bluefire™ Straight Reinforced Cut-Off Wheel - 3'' Diameter

    Norton® Bluefire™ Straight Reinforced Cut-Off Wheel - 3'' Diameter

    These Norton small diameter cut-off wheels feature thin kerfs for quick burn-free and burr-free cutting. Choose 0.035'' (about 1/32'') for the fastest cutting and lowest kerf loss, and 0.060'' (about 1/16'') for a slightly tougher cutting applications. They all excel at cutting sheet metal, pipe,…

    From: $3.99
  16. Norton® Rapid Strip Depressed Center Non-Woven Disc, 4-1/2'' Dia. x 5/8-11 Hub, Coarse

    Norton® Rapid Strip Depressed Center Non-Woven Disc, 4-1/2'' Dia. x 5/8-11 Hub, Coarse

    …more quietly. The abrasive is uniformly distributed and bonded throughout the wheel for aggressive removal of paint, rust, coatings, light edge burrs, parting lines and flashing. Extruded nylon fibers, flexible resin technology and durable abrasives come together in a disc that outperforms…

    $10.69
  17. Norton® Blaze Rapid Strip Depressed Center Non-Woven Disc, 4-1/2'' Dia. x 5/8-11 Hub, Extra Coarse

    Norton® Blaze Rapid Strip Depressed Center Non-Woven Disc, 4-1/2'' Dia. x 5/8-11 Hub, Extra Coarse

    …edge burrs, parting lines and flashing. Norton Blaze discs features ceramic aluminia grain, which boasts twice the cut rate and twice the lifespan of silicon carbide. Both the face and edge of the wheel can be used. * Use with an angle grinder for removal of paint, rust, coatings, light edge burrs,

    $19.99
  18. Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    Freud® LU90M Industrial Thin Stock Non-Ferrous Metal Saw Blades

    This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ wth…

    From: $104.47
  19. Dewalt DW872 Heavy-Duty 14'' 355mm Multi-Cutter Saw

    Dewalt DW872 Heavy-Duty 14'' 355mm Multi-Cutter Saw

    Heavy-Duty 14" (355mm) Multi-Cutter Saw * 3 Year Limited Warranty* 15 Amp / 4.0 HP motor provides more overload capacity to increase performance and durability* Multi-Cutter offers versatility by cutting a wide variety of materials including ferrous and non-ferrous metals* Utilizing a carbide tipped…

    $523.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 19 of 19
  • Page:
    1. 1
Feedback X