Cabinet Drawer Screws

  • Items 1 - 24 of 54
  • Page:
    1. 1
    2. 2
    3. 3
  1. FastCap Miller FastBlock, 2-Pack

    FastCap Miller FastBlock, 2-Pack

    …to block out drawer guides for pull-out shelves. Technical Details:* Adjusts up and down 3/16".* Adjusts in and out from 5/8" to 1".* Durable and permanent.* Flippable adjustment block accepts both wood screws and euro screws.* Great for face frame cabinets, euro cabinets and pull-out…

    1 Review(s)
    $1.99
  2. 8-32 x 1-3/4" Truss Head Break Away Screw (20 per Pack)

    8-32 x 1-3/4" Truss Head Break Away Screw (20 per Pack)

    Ideal for mounting cabinet knobs and pulls when material thickness varies, these truss head screws can be broken to the correct length in 1/4" increments. The large, low profile head ensures a clean look and solid holding power. Screws are zinc plated and available in standard and metric sizes.…

    3 Review(s)
    $4.59
  3. Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    …composite material. Works great screwing cabinet partition to floor, nail rails to partition, corner blocks, and plywood to plywood. For use in 3/4" stock.* Use #7 x 1" pan-head coarse thread screw when joining material to soft or composite material. Ideal for drawer boxes. For use in 1/2" thick…

    9 Review(s)
    $29.99
  4. Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    …15" wide or 18" wide (when used with optional Side Caddy) base cabinet opening with a drawer above it. Because the slide unit mounts to the bottom of the cabinet, however, the SmartCab will fit into virtually any cabinet, making it ideal for remodelers and retrofit applications.* Ideal for…

    $219.99
  5. M4 x 45mm Truss Head Break Away Screw (24 per Pack)

    M4 x 45mm Truss Head Break Away Screw (24 per Pack)

    Ideal for mounting cabinet knobs and pulls when material thickness varies, these truss head screws can be broken to the correct length in 1/4" increments. The large, low profile head ensures a clean look and solid holding power. Screws are zinc plated and available in standard and metric sizes.…

    2 Review(s)
    $6.29
  6. Sliding Susan® Pullout Drawer

    Sliding Susan® Pullout Drawer

    …under-mount rollout cabinet drawer - installed in less than five minutes! Features English dovetail-joint construction and 3/4 extension drawer guides. Includes one (1) drawer. Easy to install: 1) set base 1/4" from front cabinet edge; 2) tighten four pre-drilled screws into cabinet base or shelf;…

    25 Review(s)
    $64.99
  7. Kreg Drawer Mounting Brackets

    Kreg Drawer Mounting Brackets

    …slides are mounted into the cabinet, simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets and pull the slide to the front of the drawer box. Drive screws and you're done!* Works with Kreg Universal Drawer Slide Mounting Jig (#38444).*…

    $9.99
  8. Salice Futura Push-to-Open Drawer Slides

    Salice Futura Push-to-Open Drawer Slides

    …easy drawer installation and removal.* Drawer height adjustment with 3 mm range (about 1/8").* Drawer slides accept #6 wood screws or 6mm euro screws.* Minimum drawer side thickness is 1/2" (13mm).* Maximum drawer side thickness is 5/8" (16mm).* Load rating is 75 lbs dynamic, 100 lbs static.* Drawer

    From: $29.99
  9. Surface Mounted Pin Tumbler Drawer Locks

    Surface Mounted Pin Tumbler Drawer Locks

    …jimmy. Unlike many drawer locks and cabinet locks, this model is surface mounted, meaning there is no need to mortise it into the cabinet. The perfect high security lock for securing valuables in drawers. Two keys and strike plate are provided. Keyed alike. Technical Details:* Drawer lock has a 7/8"…

    1 Review(s)
    $33.49
  10. Blum Universal Brackets

    Blum Universal Brackets

    Mount Blum slides to the underside of a counter surface (example: pencil drawer) or to cabinet bottoms (example: roll out tray).* Includes mounting screws.* Made of zinc galvanized steel.* Sets of 4.

    2 Review(s)
    $9.99
  11. Case of 25 Blum low-profile 3/4 extension drawer slides - 22'' drawer length, Brown

    Case of 25 Blum low-profile 3/4 extension drawer slides - 22'' drawer length, Brown

    …the drawer for installation. Slide mounts to the bottom of the drawer side and cabinet side. Drawers extend 4" less than their overall length. Rated up to 100 lbs. Use the Blum Universal Bracket to mount these Blum slides to the underside of a counter surface (example: pencil drawer) or to cabinet

    7 Review(s)
    $157.49
  12. Bread Drawer Kits, Rev-a-Shelf BDC Series-16-3/4" Wide

    Bread Drawer Kits, Rev-a-Shelf BDC Series-16-3/4" Wide

    …sizes that can be trimmed to accommodate any drawer dimension. The Bread Drawer Cover Kit contains a one-piece cover with molded in handle and rear stop, adjustable sliding rails and mounting screws.* Convert your regular drawer into a bread drawer* Kit can be trimmed for a custom fit* Limited…

    From: $22.49
  13. Bread Drawer Kits, Rev-a-Shelf BDC Series-20-1/8" Wide

    Bread Drawer Kits, Rev-a-Shelf BDC Series-20-1/8" Wide

    …sizes that can be trimmed to accommodate any drawer dimension. The Bread Drawer Cover Kit contains a one-piece cover with molded in handle and rear stop, adjustable sliding rails and mounting screws.* Convert your regular drawer into a bread drawer* Kit can be trimmed for a custom fit* Limited…

    From: $23.49
  14. File Drawer System Insert, Rev-a-Shelf FD Series

    File Drawer System Insert, Rev-a-Shelf FD Series

    …and more with Rev-A-Shelf's File Drawer System available in both legal and letter size dimensions. * Designed for base 21 cabinets* Each Unit Contains: Wire frame, corner connectors, t-rod connections.* Mounting screws are NOT included, due to different drawer front thicknesses.* Limited Lifetime…

    $20.49
  15. Rear Brackets for Shop Basics™ GS757 Over-Travel Drawer Slides

    Rear Brackets for Shop Basics™ GS757 Over-Travel Drawer Slides

    …your cabinet with spacers, you'll save on both time and materials. The front end of the slide is simply screwed to the inside edge of the face frame, while the rear end slips into the brackets, which are screwed to the cabinet back. * Designed for use with Shop Basics™ GS757 Over-Travel Drawer

    $4.99
  16. Bulk Pricing of Blum low-profile 3/4 extension drawer slides-White Slides

    Bulk Pricing of Blum low-profile 3/4 extension drawer slides-White Slides

    …the drawer for installation. Slide mounts to the bottom of the drawer side and cabinet side. Drawers extend 4" less than their overall length. Rated up to 100 lbs. Use the Blum Universal Bracket to mount these Blum slides to the underside of a counter surface (example: pencil drawer) or to cabinet

    7 Review(s)
    From: $122.99
  17. Adjustable Pulls

    Adjustable Pulls

    …theclamping rings, loosen the set screws from the rings and slide the rings to thedesired location. Then tighten the set screws and bases. You're ready to install yourpull for a unique look. Adjustable to 4-1/4" from base to base. 4-3/4" overall length.Mounting screws included. Available in three…

    2 Review(s)
    $12.99
  18. Blum Slide Jig Gun

    Blum Slide Jig Gun

    …epoxy coated drawer slides by simply positioning the jig. Quick, accurate, easy, and absolutely level every time. Technical Details:* Used for positioning cabinet profiles on cabinet sides * Holds cabinet profile in place while screws are installed or pilot holes are made * Keeps cabinet profiles…

    7 Review(s)
    $21.99
  19. Accuride Eclipse 3132SC Undermount Slides-Eclipse 3132SC Undermount Slides

    Accuride Eclipse 3132SC Undermount Slides-Eclipse 3132SC Undermount Slides

    …cabinetry, and commercial millwork.* With front lever disconnect for easy drawer removal and reinsertion.* Front face frame hole sized for wood screws.* Compatible with 1/2" to 5/8" drawer box thicknesses.* Up to 24" wide drawer compatibility.* Precision adjustment features slotted holes to allow…

    9 Review(s)
    From: $38.99
  20. G34 Clear Glass Knob with Nickel Base

    G34 Clear Glass Knob with Nickel Base

    Update the look of a door or drawer without spending a lot of money!* Finish: Clear with nickel base* Diameter: 1-3/8"* Projection: 1-1/16"* Material: Glass/metal* Screws are included

    1 Review(s)
    $6.29
  21. Blum Mounting Sockets

    Blum Mounting Sockets

    …face-frame style cabinets or cabinets without center walls.* Made of durable white polyethylene. * Sold in set of one left hand and one right hand.* 3" Long socket with elongated mounting slot permits up to 2" of slide length adjustment.* Supplied with eight #6 5/8" panhead screws.* Allows 7/8"…

    7 Review(s)
    $4.79
  22. G105 Clear Glass Knob with Oil-Rubbed Bronze Base

    G105 Clear Glass Knob with Oil-Rubbed Bronze Base

    Update the look of your cabinet doors or drawers without spending a lot of money!* Finish: Clear with oil-rubbed bronze base* Diameter: 1-1/4"* Projection: 1-7/16"* Material: Glass/metal* Screws are included

    $8.39
  23. G105 Clear Glass Knob with Brushed Nickel Base

    G105 Clear Glass Knob with Brushed Nickel Base

    Give your door or drawer a fresh, new look with this well-made Clear Glass Knob with Brushed Nickel Base!* Finish: Clear with brushed nickel base* Diameter: 1-1/4"* Projection: 1-7/16"* Material: Glass/metal* Screws are included

    $8.99
  24. G75 Clear Glass Knob with Brushed Nickel Base

    G75 Clear Glass Knob with Brushed Nickel Base

    Give your door or drawer a fresh, new look with this well-made Clear Glass Knob with Brushed Nickel Base!* Finish: Clear with brushed nickel base * Diameter: 1-1/4" * Projection: 1-1/8" * Material: Glass/metal * Screws are included

    $7.79
  • Items 1 - 24 of 54
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X