Cabinet Drawers

  • Items 1 - 24 of 240
  • Page:
    1. 1
    2. 2
    3. 3
  1. Sliding Susan® Pullout Drawer

    Sliding Susan® Pullout Drawer

    …under-mount rollout cabinet drawer - installed in less than five minutes! Features English dovetail-joint construction and 3/4 extension drawer guides. Includes one (1) drawer. Easy to install: 1) set base 1/4" from front cabinet edge; 2) tighten four pre-drilled screws into cabinet base or shelf;…

    25 Review(s)
    $64.99
  2. Birch Pullout Shelf Kit for Kitchen or Bath

    Birch Pullout Shelf Kit for Kitchen or Bath

    …closet - wherever a more convenient reach is needed with Birch Pullout Shelf Kits for your Kitchen or Bath! Simply measure your cabinet opening, subtract 1" for the drawer slides and cut your shelving. Includes hardware and instructions for one shelf. Note: If the shelf is cut to 15" wide or less,…

    58 Review(s)
    $79.99
  3. Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Small Wood Pull-Out Drawer, Wood - Maple (4WDB-12)

    Undermount wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only…

    $54.49
  4. Blum SOLO No-Profile 3/4 Extension Slides for Face Frame Cabinets-Select Size

    Blum SOLO No-Profile 3/4 Extension Slides for Face Frame Cabinets-Select Size

    Mount on underside of the drawer. A low-cost option to create the look of expensive custom cabinetry. No-profile epoxy-coated slides offer self-closing action, smooth and quiet operation, and easy drawer removal.* Designed to work with standard American face frame cabinet depths.* 100 lb load…

    4 Review(s)
    $21.99
  5. Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    Large Wood Pull-Out Drawer, Wood - Maple (4WDB-15)

    Undermount wood drawer boxes for your kitchen presented by Rev-a-Shelf. Add functionality to your base cabinets. The dovetail construction, maple veneer plywood and concealed bottom mount slides are sturdy enough to handle years of use. * Euro slide with 3/4 extension* Simple installation with only…

    $62.99
  6. Floor-Mounted Drawer Slides with Metal Sides

    Floor-Mounted Drawer Slides with Metal Sides

    cabinet space. Length of slide determines depth of shelf.Includes mounting hardware. 75-pound load rating. Additional features:* Includes metal sides* Smooth-rolling action * 3/4-extension for ample pullout access* White epoxy finish - perfect for kitchens!* Slides mount directly to floor or cabinet

    4 Review(s)
    From: $24.99
  7. Shelf Bracket/Slide Kit

    Shelf Bracket/Slide Kit

    …sliding shelves or drawers in closets, kitchens, or almost any place you want. Installation is easy in new as well as existing cabinets. Adjustable in 1/2" increments to allow for maximum use of space. Kit includes four 24" white shelf standards, 2 sets of 22" Blum white epoxy drawer slides and two…

    1 Review(s)
    $59.99
  8. Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    …15" wide or 18" wide (when used with optional Side Caddy) base cabinet opening with a drawer above it. Because the slide unit mounts to the bottom of the cabinet, however, the SmartCab will fit into virtually any cabinet, making it ideal for remodelers and retrofit applications.* Ideal for…

    $219.99
  9. 1-1/4" QuikTray Rollout Shelf Systems

    1-1/4" QuikTray Rollout Shelf Systems

    …of the cabinet, and screw it into place. And durability is top notch as well: the vertical supports are fabricated from a tough polymer, while the hook dowels are made from steel. Compatible with both side-mount and undermount drawer slides (sold separately). Choose from tan or white. Drawer slides…

    1 Review(s)
    $19.99
  10. Cherry by the Piece-3/4" Thickness

    Cherry by the Piece-3/4" Thickness

    …marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! * Distribution: As many as five varieties of Black cherry…

    5 Review(s)
    From: $7.99
  11. Camden Nantucket Style Drawer Front

    Camden Nantucket Style Drawer Front

    …Custom Cabinet Door and Drawer Front Program lets you order high-quality cabinet doors and drawer fronts to create just the right look for your kitchen cabinets or furniture pieces! Transform your old kitchen cabinets and save thousands over replacing them. Or, save time on your next new cabinet or…

    From: $42.19
  12. Auburn Shaker Style Flat Panel Cabinet Door

    Auburn Shaker Style Flat Panel Cabinet Door

    …Custom Cabinet Door and Drawer Front Program lets you order high-quality cabinet doors and drawer fronts to create just the right look for your kitchen cabinets or furniture pieces! Transform your old kitchen cabinets and save thousands over replacing them. Or, save time on your next new cabinet or…

    From: $19.49
  13. 100-lb. Full Extension Drawer Slides - Accuride 3832 (10" to 28")

    100-lb. Full Extension Drawer Slides - Accuride 3832 (10" to 28")

    …the 32mm hole pattern. Applications:* Store fixtures* Desk drawers* Residential cabinetry (Not recommended for lateral files. Use for side mount only) Features/Specifications:* Full extension* .50" side space* Hold-in detent to prevent drawer roll-out and bounce-back* Lever disconnect* Easy access…

    66 Review(s)
    From: $15.49
  14. Cherry Gun Cabinet Plan

    Cherry Gun Cabinet Plan

    …Thanksgiving Dinner. Holds up to 8 guns on a rotating Gun Caddy. The plan appeared in the Woodworker'sJournal, November/December 1999 issue. Supplies required to complete this project include: Two Drawer Locks Item #17790 One Lock Item #99011 Two pair of Hinges Item #35512 One Lazy Susan Item #12451

    2 Review(s)
    $4.19
  15. Accuride Center Mount Slide for Face Frame Cabinets (Series 1029)

    Accuride Center Mount Slide for Face Frame Cabinets (Series 1029)

    …mount slide maximizes space in kitchen and bath cabinets as well as furniture drawers. Maximize available space by mounting this low profile (1-3/8" W X 3/8" H) ball bearing slide beneath your face frame drawers. No hardware is visible on the drawer sides when the slide is extended. Rigid steel…

    54 Review(s)
    From: $7.49
  16. StealthLock Keyless Cabinet Locking System SL-100

    StealthLock Keyless Cabinet Locking System SL-100

    …and drawers throughout your home or business. Multiple locking modes. Operates on four "AAA" batteries (not included) and a CR232 coin battery (included). * Ideal for use on lockers, closets, cabinet doors, liquor cabinets, entertainment or AV cabinets, healthcare cabinetry, retail display cabinets

    $137.59
  17. Under Drawer Swing Up Appliance Mechanism

    Under Drawer Swing Up Appliance Mechanism

    Under drawer swing up mechanism raises appliances to a convenient working height. * Under drawer swing up mechanism raises appliances to a convenient working height. * Appliances are hidden away, and available in seconds. * Trigger release provides easy access. Minimum mounting height 22-3/4" ,…

    $82.99
  18. Bread Drawer Kits, Rev-a-Shelf BDC Series-20-1/8" Wide

    Bread Drawer Kits, Rev-a-Shelf BDC Series-20-1/8" Wide

    Turn any base cabinet drawer into a custom bread drawer. The attractive textured finish hides scratches and is available in white, almond, and translucent. The BDC Series from Rev-a-Shelf is available in white, almond or translucent finishes and 2 sizes that can be trimmed to accommodate any drawer

    From: $23.49
  19. Flat Solid Wood Drawer Front with Customizable Edge

    Flat Solid Wood Drawer Front with Customizable Edge

    …Custom Cabinet Door and Drawer Front Program lets you order high-quality cabinet doors and drawer fronts to create just the right look for your kitchen cabinets or furniture pieces! Transform your old kitchen cabinets and save thousands over replacing them. Or, save time on your next new cabinet or…

    From: $21.59
  20. Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …degrees, or even a cabinet one corner at a time. * Works with any joinery technique, from nails to hand cut dovetails.* Ideal for every stage of construction, from assembling plywood cabinets to face frames and drawers. * Clamp-It® is also perfect for framing decks, drawer assembly, and…

    14 Review(s)
    $29.99
  21. Blum® Low-Profile 3/4 Extension Epoxy Coated Drawer Slides - White

    Blum® Low-Profile 3/4 Extension Epoxy Coated Drawer Slides - White

    These 3/4 extension drawer slides are among the quietest, smoothest and lowest profile slides on the market. An ideal choice for face frame cabinets, the slides are made from heavy gauge steel coated with easy-to-clean epoxy for maximum convenience and durability.

    46 Review(s)
    From: $5.49
  22. Accuride® Eclipse 3132EC Undermount Slide

    Accuride® Eclipse 3132EC Undermount Slide

    Undermount full-extension slide features Easy-Close mechanism to prevent drawer slam and tolerance-absorbing design for flawless movement. Precision adjustment includes 1/8" vertical and horizontal drawer front adjustment, and auto-adjust cabinet member positioning.

    8 Review(s)
    From: $51.99
  23. 24'' x 48'' Cherry Plywood

    24'' x 48'' Cherry Plywood

    …the face; mechanical fasteners do not hold as well on the butt edges and ends.* Use for wall coverings, drawer sides and bottoms, and a wide variety of case goods such as desks, kitchen cabinets, fixtures, and fine furniture.* Sanded first with a 120 grit belt and then following with a 150 grit belt…

    From: $24.99
  24. 300-Pound Electromagnetic Lock

    300-Pound Electromagnetic Lock

    …is attracted to the steel armature plate, which is mounted on a door, holding the door fast against unauthorized entry. Ideal for cabinets, drawers, or small enclosures, an 80-Pound Mini Maglock is also available. * Base w/36-inch hookup wire* Armature plate* Mounting hardware* Instructions

    $154.49
  • Items 1 - 24 of 240
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X