Cabinet Making Tools

  • Items 1 - 24 of 102
  • Page:
    1. 1
    2. 2
    3. 3
  1. Incra® HingeCrafter

    Incra® HingeCrafter

    …your project. Easily make four hinge barrel diameters: 3/8", 1/2", 5/8" and 3/4". The two smaller sizes are ideal for horizontal applications like jewelry boxes and humidors, while the two larger sizes are perfect for vertical hinge applications such as cabinet doors.* Make any hinge length up to…

    1 Review(s)
    $109.99
  2. Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    …are easier to see, especially with the clear window in place, and since the waste-side splinterguard is also flat, it need not be removed when making bevel cuts. The TS 55 REQ also introduces micro-adjustable depth of cut, allowing you to cut just through the material, or to a precise depth for…

    1 Review(s)
    $615.00
  3. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers…

    From: $15.99
  4. Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Ogee Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    For those who make cabinet doors only occasionally, this cutter provides an affordable, space-saving solution to routing cope and stick joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Because…

    2 Review(s)
    $69.99
  5. Safety Speed Cut Panel Pro 2 Panel Saw

    Safety Speed Cut Panel Pro 2 Panel Saw

    This economical saw makes it easy to handle those big sheets of wood or plastic and cut them accurately - horizontally or vertically. One operator can cut large sheets of material into finished sizes or into sizes that are easy to handle. Ideal for cabinet making, building construction, remodeling,…

    From: $898.99
  6. FastFix® FX Depth Stop Chuck

    FastFix® FX Depth Stop Chuck

    …Green quick-out ring backs out screws without affecting depth setting. Great for jobs where you want to make sure the screws are perfectly flush every time, including dry wall, decks, and cabinets. Getting it right the first time eliminates waste of material and fasteners and saves valuable time.…

    $120.00
  7. Freud® 99-863 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

    Freud® 99-863 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

    Making double-sided doors has never been easier! This optional cutter for double-sided doors matches the bevel profile of Freud's 99-763 Stile and Rail Bit Set (32427, sold separately). The result affords you even more creative freedom by letting you build custom frame and panel doors with…

    $101.97
  8. SawStop 3HP Professional Table Saw w/52'' Fence, Rails, and Extension Table

    SawStop 3HP Professional Table Saw w/52'' Fence, Rails, and Extension Table

    …guard collects above table dust and minimizes blade exposure.* Tool-Free Quick-Change Blade Guard Mount: Make fast and easy transitions between blade guard and riving knife with no tools required.* Quick-Release, Zero-Clearance Insert: Features a quick-release mechanism for tool-free access to…

    1 Review(s)
    $2,999.00
  9. Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/2" Shank

    Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/2" Shank

    …fitting tongue and groove joints. Use it to machine flat panel doors and cabinet panels, to create tongue and groove wainscoting, or just for edge joining long boards or cabinet components. The guide bearings make it easy to get a consistent depth of cut, and also allow you to machine joints…

    10 Review(s)
    $59.99
  10. Blum Tandem Full Extension Drawer Slides with Blumotion

    Blum Tandem Full Extension Drawer Slides with Blumotion

    …TANDEM runners are designed for the American 3" increment cabinet depth system. This feature permits overlay or inset applications to use the same runner. Full length runners make installation in panel or face frame cabinets possible.* For faster, more flexible adjustment of your drawer fronts,…

    16 Review(s)
    From: $35.99
  11. Kreg Precision Router Table System

    Kreg Precision Router Table System

    …the rip fences on high-end table saws, the T-square fence on Kreg's Precision Router Table keeps the fence precisely parallel to the miter slot, making tiny adjustments simple, and allowing you to enjoy all the benefits of the miter slot-all the time. The fence also features two independent fence…

    1 Review(s)
    $499.00
  12. Blum® 95° Thick Door Clip Top Frameless Overlay Hinges-Snap Closing Hinges

    Blum® 95° Thick Door Clip Top Frameless Overlay Hinges-Snap Closing Hinges

    …and accurately with parallel movement! Now you can make precision height adjustments with the new parallel-movement mounting plate. Simply turn one screw for easy parallel height adjustments. Mount and dismount cabinet doors without a single tool. Settings remain in place even when you remove the…

    3 Review(s)
    From: $15.29
  13. Freud® 99-267 2-pc. Entry & Interior Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    Freud® 99-267 2-pc. Entry & Interior Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    …that last a lifetime. The bits are larger than standard rail and stile bits, and are capable of cutting joints for doors up to 1-3/4" thick. To make thinner interior doors (1-3/8" thick), simply remove the spacers. You can also mill a tenon of virtually any length! To do so, the top cutter and…

    1 Review(s)
    $199.97
  14. The Complete Illustrated Guide to Furniture & Cabinet Construction

    The Complete Illustrated Guide to Furniture & Cabinet Construction

    …presentation of key techniques and methods* Visual maps, cross-references and indexes make information easy to find* Covers the many woodworking methods and tools available* Modern, up-to-date coverage of tools and techniques* Part of a three-volume encyclopedia of woodworking "After 20 plus years…

    $39.95
  15. Rockler Clamp-It® Assembly Square

    Rockler Clamp-It® Assembly Square

    …is a square you can clamp. In fact, you can even assemble a cabinet one corner at a time! Works with any joinery technique, from nails to hand cut dovetails. It's ideal for every stage of construction, from assembling plywood cabinets to face frames and drawers. Clamp-It® is also perfect for…

    110 Review(s)
    $12.99
  16. Bench Dog® ProTop Contractor Portable Router Table

    Bench Dog® ProTop Contractor Portable Router Table

    …packed with full-sized features that make it one of the finest job site router tables on the market. Its unique forward offset router location and dual position fence give it as much usable table surface as most full-size router tables. With 15" of inside cabinet height, it can house virtually any…

    12 Review(s)
    $299.99
  17. Powermatic® 10'' Table Saw 3HP w/30'' Fence & Rout-R-Lift

    Powermatic® 10'' Table Saw 3HP w/30'' Fence & Rout-R-Lift

    …motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be…

    $3,264.99
  18. Building Kitchen Cabinets, Book

    Building Kitchen Cabinets, Book

    …own cabinets you're not just saving money. You also can improve upon the materials and construction used in factory-made cabinets, and get exactly the sizes you want. And with the techniques that Udo Schimdt demonstrates and explains, you can incorporate custom details in your cabinets to make them…

    6 Review(s)
    $19.95
  19. Jet® Oscillating Drum Sander 1.75HP w/Closed Stand

    Jet® Oscillating Drum Sander 1.75HP w/Closed Stand

    …from left to right and lowers heat build-up on the sanding belt to reduce loading and burning. Additional features include a built-in cabinet door for easy access to storage, patented conveyor TRACKERS™ that reduce the need for manual belt adjustments and our Exclusive SandSmart™…

    $2,449.99
  20. SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52

    SawStop Contractor Table Saw w/52'' Fence, CNS175-TGP52

    …the unique demands of the avid hobbyist in a home setting. Delivering the peerless fit and finish of the Professional Cabinet Saw, this saw's 110V power and optimized footprint make it ideal for the many challenges of a home shop. With SawStop's® legendary safety system, uncompromising quality…

    2 Review(s)
    $1,899.00
  21. Powermatic 10" Table Saw 5HP w/30" Fence & Rout-R-Lift (PM2000)(1792013K)

    Powermatic 10" Table Saw 5HP w/30" Fence & Rout-R-Lift (PM2000)(1792013K)

    …motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be…

    $4,039.99
  22. INCRA Precision Specialty Rules 6'' x 3'' X-Y Marker

    INCRA Precision Specialty Rules 6'' x 3'' X-Y Marker

    …finish along with the unique grid layout make finding and leaving your mark effortless. Technical Details:* Rule measures 6" x 3" * Makes it easy to measure and mark reference points from either edge of a corner* Makes positioning and drilling holes for cabinet door knobs and handles a breeze* One…

    $31.99
  23. Corrugated Fastener Tool for Face Frame Construction

    Corrugated Fastener Tool for Face Frame Construction

    Make quick work of face frame construction, butt joints, cabinets, door and window construction and more. Corrugated fasteners work in hard and soft woods to draw joints together and offer twice the strength of regular fasteners. Fastener Tool drives 1/2" fasteners in 1/4", 3/8" and 1/2" lengths.…

    4 Review(s)
    $237.99
  24. AccuScribe PRO Scribing Tool

    AccuScribe PRO Scribing Tool

    …radii. Loaded with new and improved features! The AccuScribe PRO makes it easy to maintain a consistent scribe offset, staying parallel to the object surface every time. It is ideal for scribing the trim strip on kitchen cabinets, architectural moldings, tile, countertops, splash guards, and even…

    3 Review(s)
    $17.99
  • Items 1 - 24 of 102
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X