Cabinet Router Bits

  • Items 1 - 24 of 109
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud® 97-200 3-Pc. Cabinet Router Bit Set

    Freud® 97-200 3-Pc. Cabinet Router Bit Set

    Ogee rail-and-stile bits and a Quadra-Cut™ bevel raised-panel bit all have 1/2" shanks and are designed for use on 3/4" stock. Bits cut all composite materials, plywoods, hardwoods and softwoods. For use on a table-mounted portable router. Rail-and-stile bits have an overall diameter of…

    $179.99
  2. Rockler Straight Raised Panel Router Bit - 1-1/4" Dia x 1-5/8" H x 1/2" Shank

    Rockler Straight Raised Panel Router Bit - 1-1/4" Dia x 1-5/8" H x 1/2" Shank

    Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor, and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy…

    4 Review(s)
    $54.99
  3. Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    …the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts, and for building 4-sided columns. To make setting the cutter height easy and fool-proof, use the Rockler Router Bit Set-up…

    From: $57.99
  4. Freud® 97-156 3-Pc. Door Router Bit Set - 1/2" Shank

    Freud® 97-156 3-Pc. Door Router Bit Set - 1/2" Shank

    …precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit

    0 Review(s)
    $195.97
  5. Rockler Ogee Stile and Rail Router Bit Set - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Ogee Stile and Rail Router Bit Set - 1-3/8" Dia x 1" H x 1/2" Shank

    These top-quality bits give you the high-performance you're looking for when creating ogee profile cope-and-stick door frames. The K10 and K20 grade carbide edges cut quickly and cleanly, keeping your router on track for a precision cut. Pair them with 1/4" flat panels or matching ogee raised panels…

    $99.99
  6. Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Classical Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  7. Freud® 99-267 2-pc. Entry & Interior Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    Freud® 99-267 2-pc. Entry & Interior Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    Use this router bit set to build beautiful custom entry doors and interior passage doors. With true rail-and-stile construction, you'll get rock-solid joints that last a lifetime. The bits are larger than standard rail and stile bits, and are capable of cutting joints for doors up to 1-3/4" thick.…

    1 Review(s)
    $199.97
  8. Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    Rockler Classical Reversible Rail & Stile Router Bit - 1-5/8" Dia x 15/16" H x 1/2" Shank

    …make cabinet doors only occasionally, this cutter provides an affordable, space-saving solution to routing cope and stick joints. One bit cuts both rail and stile profiles; just remove the cutters and rearrange them to go from coping rail ends to routing grooves in the stiles. Because the bit is…

    1 Review(s)
    $69.99
  9. Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Round-Edge Matched Stile and Rail Router Bit Set - 1-5/8" Dia x 1" H x 1/2" Shank

    …a smooth, burn-free cut. Slot cutter can be easily removed. 1-5/8" overall diameter x 1" cutting length x 1/2" shank. 1-1/2" shank length. 5/8" bearing. Groove is 3/8" D x 1/4"H. For an easy way to set the bit height with perfect repeatability, try our Router Bit Set-Up Jig (53803, sold separately).

    1 Review(s)
    $109.99
  10. Freud® 97-250 3-Pc. Door Router Bit - 5/8" H x 1/2" Shank

    Freud® 97-250 3-Pc. Door Router Bit - 5/8" H x 1/2" Shank

    …These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and…

    $183.47
  11. Freud® 99-762 Shaker Stile and Rail Router Bit - 1-11/16" Dia x 1/2" Shank

    Freud® 99-762 Shaker Stile and Rail Router Bit - 1-11/16" Dia x 1/2" Shank

    Now with Freud's unique, patented Premier Adjustable Rail-and-Stile Router Bit system, you can build cabinet doors in a range of door thicknesses – all with perfectly fitting tenons! This easy-to-use solution produces Shaker-style rail-and-stile doors from 5/8" to 1-1/4" thick. You can adjust…

    $127.47
  12. Space Balls - Raised Panel Door Spacers

    Space Balls - Raised Panel Door Spacers

    Insert these space balls in your rail and stile grooves to center raised panels in their frames, thereby ensuring flawless frame and panel assemblies. The balls are soft enough to allow expansion and contraction, but firm enough to keep the panel from rattling. 8-10 space balls per door recommended.…

    14 Review(s)
    $6.49
  13. Rockler P605 Ogee Raised Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P605 Ogee Raised Panel with Back Cutter Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …Rockler router bits are manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    $137.79
  14. Freud® 99-286 Glass Panel Cabinet Door Router Bit Set - 2" Dia x 1-3/32" H x 1/2" Shank

    Freud® 99-286 Glass Panel Cabinet Door Router Bit Set - 2" Dia x 1-3/32" H x 1/2" Shank

    …surface. No other set on the market provides this feature. * Easy time saving set-up improves accuracy and increases profitability for the professional. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on table-mounted portable routers.* for 3/4'' to 1'' thick material

    2 Review(s)
    $186.97
  15. Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank

    Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank

    …of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush trim bit, you also cut down on a lot of sanding. Just a pass or two with a palm sander is enough to remove any mill marks. Ideal for trimming cabinet face frames flush with the cabinet sides.

    $22.99
  16. Freud® 3-Pc. Undersized Plywood Router Bit Set

    Freud® 3-Pc. Undersized Plywood Router Bit Set

    …protects bits from heat and pitch build up. Set comes in Freud's new case with bit mount to keep bits handy and safe. All bits have 1/4'' shanks. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table mounted portable routers. * These Freud bits are designed…

    From: $51.47
  17. Routers and Router Tables (Book)

    Routers and Router Tables (Book)

    …One - Routers and Bits * How Many Routers Does Your Shop Need? * Trim Routers * Heavy-Duty Plunge Routers* Ten Essential Router Bits * Upgrade Your Router with Shop-Built BasesPart Two - Router Tables * Router-Table Basics * A Versatile Router Table* Space-Saving Router Table * Rock-Solid Router

    $21.95
  18. Rockler High Molding Router Bit - 1-1/6" Dia x 1-5/8" H x 1/2" Shank

    Rockler High Molding Router Bit - 1-1/6" Dia x 1-5/8" H x 1/2" Shank

    Give your furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, door casings, trim, pilasters, window casing/sills, baseboards and picture frames. You can use the full profile, or just a portion of it to achieve the look you want. Features two…

    1 Review(s)
    $54.99
  19. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    Quick, accurate and versatile jig allows you to cut perfect-fitting mortise and tenons with a plunge router - requires only one setup to cut both pieces.* Ideal for cabinet, chair and table construction. Technical Details:* Fully adjustable for compound angle joints.* With reversible template to…

    $383.99
  20. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …cut during operation. Use the Rockler Rail Coping Jig for rail and stile doors of cabinets, windows and more to make clean cope cuts without blowouts - perfect for narrow cross-grain rail cuts. If you're after a cabinet door jig, look no further! Simply align material flush with the outside edge of…

    117 Review(s)
    $59.99 $44.99

    SAVE 25%

  21. Rockler Bead Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Bead Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  22. Rockler Traditional Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Rockler Traditional Stile and Rail Router Bit - 1-3/8" Dia x 1" H x 1/2" Shank

    Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. The one-piece cutting edge allows you to achieve a…

    4 Review(s)
    $99.99
  23. Freud® 99-763 Bead Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    Freud® 99-763 Bead Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

    …These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and…

    $127.47
  24. Freud® 97-154 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

    Freud® 97-154 3-Pc. Door Router Bit Set - 5/8" H x 1/2" Shank

    …These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and…

    3 Review(s)
    $183.47
  • Items 1 - 24 of 109
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X