Cabinet Shelf Supports

  • Items 1 - 24 of 33
  • Page:
    1. 1
    2. 2
  1. Zinc Shelf Standards-Select length

    Zinc Shelf Standards-Select length

    Perfect for utility cabinet shelves in the shop, laundry room or garage, these durable shelf standards can be either flush or surface mounted. Shelves may be adjusted in 1/2" increments using matching supports (33837, sold separately). Zinc-plated standards are made from cold-rolled steel and…

    1 Review(s)
    From: $2.59
  2. Brass Shelf Standards-Select length

    Brass Shelf Standards-Select length

    shelf standards can be surface mounted or recessed into cabinet sides. Made of cold rolled steel with brass finish, they measure 5/8" wide x 3/16" thick. Support slots are spaced at 1/2" for maximum flexibility in adjusting shelf heights. Mounting nails are included. Matching shelf supports (33910)…

    5 Review(s)
    From: $2.79
  3. White Shelf Standards-Select length

    White Shelf Standards-Select length

    …from utility cabinets to book cases. Standards are made from epoxy-coated cold-rolled steel and can be surface mounted or recessed into a groove in the cabinet or shelving wall. Standards are 5/8" wide x 3/16" thick and come with mounting nails. Matching shelf supports (22153, sold separately)…

    4 Review(s)
    From: $2.79
  4. 1/4" Shelf Pin Supports

    1/4" Shelf Pin Supports

    …pin supports for adjustable shelving in wood cabinets. Pin supports and optional sleeves (sold separately) both come in packs of 16. * Use these shelf supports for adjustable shelving in wood cabinets* Pin Supports have a spoon (paddle) design with a 1/4" diameter shaft* Tenon length of pin support

    48 Review(s)
    $4.59
  5. 1/4" Shelf Plastic Supports-Select color

    1/4" Shelf Plastic Supports-Select color

    Made of durable plastic, these shelf supports provide a sturdy, economical solution for bookshelves, cabinet shelves and more. Supports fit in a standard 1/4" shelf pin hole. Available in clear or tan plastic.

    6 Review(s)
    From: $4.69
  6. 1-1/4" QuikTray Rollout Shelf Systems

    1-1/4" QuikTray Rollout Shelf Systems

    …and error-free: simply pop the drawer slides into the vertical supports to create a square frame, snug this frame up against the front of the cabinet, and screw it into place. And durability is top notch as well: the vertical supports are fabricated from a tough polymer, while the hook dowels are…

    1 Review(s)
    $19.99
  7. I-Semble™ Cross Strap Shelf Stabilizer Kit

    I-Semble™ Cross Strap Shelf Stabilizer Kit

    …also works beautifully on any ordinary shelf or cabinet that needs additional support against racking, such as older furniture where the joints have started to loosen up. Technical Details:* Provides support against racking without ugly braces or supports.* A very modern minimalist look, no backs…

    $11.99
  8. Lazy Susan Half-Moon Single Shelf, Rev-a-Shelf 6881 Series-33"x16.125"x16.5"

    Lazy Susan Half-Moon Single Shelf, Rev-a-Shelf 6881 Series-33"x16.125"x16.5"

    …the cabinet. In addition, the color coated shelf supports match the shelf and provide maximum deflection support.* Designed for a blind corner cabinet application* Shelves come in two different finishes: White or Almond* Limited Lifetime Warranty* Each unit contains: 1 shelf support, 1 positioning…

    3 Review(s)
    From: $85.99
  9. 1/4'' Shelf Pin Sleeves

    1/4'' Shelf Pin Sleeves

    These 1/4'' pin support sleeves are the ideal companion for our 1/4'' Shelf Pin Supports to add strength to your adjustable cabinet shelving. Sleeves require a 9/32'' diameter hole, 3/8'' deep. Sold in packs of 16.

    $4.29
  10. Bench Dog 1/4'' Shelf Pin Jig

    Bench Dog 1/4'' Shelf Pin Jig

    …the back of the cabinet or the lip of a face frame. Fence features a non-slip rubber material so the jig stays firmly in place while drilling, and onboard storage for the index pin and drill bit keep everything in one convenient place. The Bench Dog Shelf Pin Jig is ideal for 1/4'' shelf supports.

    $19.99
  11. Powermatic® Tilt Table Mortiser w/Stand

    Powermatic® Tilt Table Mortiser w/Stand

    …six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35°. The table can also move left to right and forward and back on dovetail ways with the large…

    1 Review(s)
    $1274.99
  12. 5mm Shelf Pin Supports

    5mm Shelf Pin Supports

    cabinets. Pin supports and optional sleeves (sold separately) both come in packs of 16. * Pin Supports have a spoon (paddle) design with a 5mm diameter shaft.* Tenons on pin supports are 8mm; overall pin length is 19mm.* These supports with or without sleeves are perfect for use with JIG IT shelf

    6 Review(s)
    $3.59
  13. Rev-a-Shelf Corner Shelf Hardware Only

    Rev-a-Shelf Corner Shelf Hardware Only

    …our pre-made wooden shelves to go with this hardware. Includes a top pivot, cam base, an upper and lower center post assembly, two shelf supports and screws. Technical Details* Adjusts between 26-1/2" and 34"* Diameter of the center post is 1"* Load rating: 68 lbs per shelf* Shelves sold separately

    9 Review(s)
    $50.49
  14. Rockler Router Table Steel Stand

    Rockler Router Table Steel Stand

    …35". Technical Details:* Steel router stand measures 18"D x 26"W x 32"H. * Rugged 1/8" thick steel.* Beefier bottom stretchers with a predrilled lip support plenty of weight for a shelf or a completely enclosed cabinet.* New, glossier finish.* Predrilled holes make it easy to add sides and a bottom.

    $119.99
  15. Door Mount Cutting Boards, Rev-a-Shelf 4DMCB Series-Cutting Board Storage w/Polymer Cutting Board

    Door Mount Cutting Boards, Rev-a-Shelf 4DMCB Series-Cutting Board Storage w/Polymer Cutting Board

    These door mount cutting boards from Rev-a-Shelf feature a stylish wood and chrome support rack with a UV-cured clear finish that ensures an acceptable match to any cabinet.* Mounts to cabinet door with only 4 screws* Included door mount brackets allow for up to 5" of adjustability* Limited Lifetime…

    From: $50.49
  16. Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6842 Series-31" Diameter

    Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6842 Series-31" Diameter

    …to help distribute the weight from the cabinet wall to the floor of the cabinet. In addition, the color coated shelf supports match the shelf and provide maximum deflection support.* Set includes 2 shelves and pivot hardware* Designed for a blind corner cabinet application* Limited Lifetime Warranty…

    1 Review(s)
    $122.99
  17. Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6882 Series-31" Diameter

    Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6882 Series-31" Diameter

    …distribute the weight from the cabinet wall to the floor of the cabinet. In addition, the color coated shelf supports match the shelf and provide maximum deflection support.* Includes 2 Polymer Shelves as well as pivot and slide hardware* Designed for a blind corner cabinet applications* Available…

    1 Review(s)
    $182.99
  18. Festool Hole Drill Set with T-Loc Systainer

    Festool Hole Drill Set with T-Loc Systainer

    …With the LR 32 Hole Drilling System from Festool, you can precisely and efficiently build cabinets using the European frameless 32 mm system. Invaluable for placing cup hinges (35mm) or setting shelf pin holes (based on 32mm spacing) in casework, this portable line boring system allows you…

    $495.00
  19. 5mm Shelf Pin Sleeves

    5mm Shelf Pin Sleeves

    These 5mm pin support sleeves are the ideal companion for our 5mm Shelf Pin Supports to add strength to your adjustable cabinet shelving. Sleeves require a 7/32'' diameter hole, 5/16'' deep. Sold in packs of 16.

    $3.99
  20. Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6842 Series-33" Diameter

    Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6842 Series-33" Diameter

    …to help distribute the weight from the cabinet wall to the floor of the cabinet. In addition, the color coated shelf supports match the shelf and provide maximum deflection support.* Set includes 2 shelves and pivot hardware* Designed for a blind corner cabinet application* Limited Lifetime Warranty…

    $132.99
  21. Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6842 Series-39" Diameter

    Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6842 Series-39" Diameter

    …to help distribute the weight from the cabinet wall to the floor of the cabinet. In addition, the color coated shelf supports match the shelf and provide maximum deflection support.* Set includes 2 shelves and pivot hardware* Designed for a blind corner cabinet application* Limited Lifetime Warranty…

    $146.99
  22. Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6882 Series-33" Diameter

    Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6882 Series-33" Diameter

    …distribute the weight from the cabinet wall to the floor of the cabinet. In addition, the color coated shelf supports match the shelf and provide maximum deflection support.* Includes 2 Polymer Shelves as well as pivot and slide hardware* Designed for a blind corner cabinet applications* Available…

    $184.99
  23. Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6882 Series-39" Diameter

    Half-Moon 2 Shelf Blind Corner Lazy Susans, Rev-a-Shelf 6882 Series-39" Diameter

    …distribute the weight from the cabinet wall to the floor of the cabinet. In addition, the color coated shelf supports match the shelf and provide maximum deflection support.* Includes 2 Polymer Shelves as well as pivot and slide hardware* Designed for a blind corner cabinet applications* Available…

    $202.99
  24. Blind Corner Half-Moon Wood 2 Shelf Lazy Susans, Rev-a-Shelf 4WLS Series

    Blind Corner Half-Moon Wood 2 Shelf Lazy Susans, Rev-a-Shelf 4WLS Series

    …left or right hand cabinet applications.* Wood 2-Shelf Set* Pivot and slide hardware* Minimum framed opening 18"* Limited Lifetime Warranty DETAILS PER SKU: 1001738* Dimensions: 15-0"W x 2-0"H x 35-0"D* Diameter: 35"* Min. Cab. Opening: 15"W* Each Unit Contains: (2) shelf supports (6820-07-**); (2)…

    0 Review(s)
    From: $246.99
  • Items 1 - 24 of 33
  • Page:
    1. 1
    2. 2
Feedback X