Cam Clamp

  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
  1. Cam Clamps

    Cam Clamps

    Exclusive cam clamps give you quick release for clamping jigs and fixtures. Choose from 1/4"-20 or 5/16"-18; for use with any respective 1/4"-20 or 5/16"-18 threaded/hex bolt or T-bolt. Each pack contains two cam levers, two threaded cross dowels and washers.

    16 Review(s)
    $9.99
  2. Wooden Cam Clamp

    Wooden Cam Clamp

    …jaws shut and flip the cam lever to apply pressure. * These hardwood cam clamps open to 8-1/4" inches.* The jaw depth (distance from the clamp pad to the bar) is 4-1/4" (40929) or 7-1/2" (40933).* Carefully crafted from solid beech hardwood, and riveted for durability.* Clamp pads are tipped with…

    1 Review(s)
    $15.79 From: $7.89

    SAVE 50%

  3. Biesemeyer 18-901 Universal Drill Press Fence

    Biesemeyer 18-901 Universal Drill Press Fence

    …tall workpieces, or horizontally for easy handling when working with narrowpieces, or when clearance is needed for the chuck. Two cam-action clamps slide alongT-tracks in the drill press table-simply close them to lock the fence in position. Aflip-down stop is also included, which can be lengthened…

    $69.99
  4. Clamping Elements for Festool Multifunction Tables

    Clamping Elements for Festool Multifunction Tables

    The ultimate complement to the Festool MFT system, the Festool Clamping Elements secure your workpiece for precision routing, sanding, cutting, or just about any other application. Cam-action levers and rubber-padded clamp surfaces enable easy locking and quick release for a secure grip on your…

    $110.00
  5. Minifix JIG IT® Template

    Minifix JIG IT® Template

    Marking and drilling guide for Minifix fasteners.* An easy-to-use marking and drilling guide for fasteners.* Mark location of cam holes with a center punch Includes drill guide bushing for drilling 8mm horizontal hole.* Includes clamp and drill guide.

    8 Review(s)
    $41.99
  6. Minifix (KD) Fittings-Minifix Fittings

    Minifix (KD) Fittings-Minifix Fittings

    …to use marking and drilling guide for 3/4" Minifix fasteners (#22161 only). Mark location of cam holes with a center punch. Includes drill guide bushing for drilling 8mm horizontal hole. Includes clamp and drill guide. Drill bits and Stop Collars For 3/4" Minifix, use #28516 8mm Brad Point bit with…

    14 Review(s)
    $7.39
  7. Jet® 12'' Sliding Dual-Bevel Compound Miter Saw

    Jet® 12'' Sliding Dual-Bevel Compound Miter Saw

    …Hold-down clamp ensures an accurate cut by stabilizing workpiece* Oversized ergonomic knobs provide ease of use and maximum control* Upfront controls for safety and ease of use* Dual bevel capability allows you to angle and stop at 0°, 33.9°, and 45° left and right* Quick cam miter lock…

    $739.99
  8. DELTA 50-761 2 HP Dust Collector 2100 CFM

    DELTA 50-761 2 HP Dust Collector 2100 CFM

    …induction motor for long-lasting, smooth performance with protection from damaging dust.* Snap-in bag rings eliminate need for cam-over-lock style clamps.* 6 mil plastic chip collection bags show you when the bags need emptying.* Sturdy steel base with four easy-gliding wheels for moving from…

    1 Review(s)
    From: $869.99
  9. Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    …extruded aluminum, the redesigned jig body now has fixed integral stops to ensure joint alignment and non-marring textured clamping surfaces.* Quick-acting cams secure the work for precise machining. Built-in scales provide rapid and accurate fine adjustment for stock thickness and through-dovetail…

    10 Review(s)
    $795.00
  10. Trim Clip Miter Clip

    Trim Clip Miter Clip

    Clamping miters couldn't get much easier than with the Miter Clip. Just position the Miter Clip and squeeze-the reverse cam mechanism applies pressure and holds the miter clamp firmly shut, while the notch keeps the tips of the miters neatly aligned. Once clamped, you can also rotate the clamp

    1 Review(s)
    $16.99
  11. Nova Finger Grind Jig

    Nova Finger Grind Jig

    …with an ordinary 6" or 8" bench grinder for excellent sharpening results without the high cost. The jig uses an extruded aluminum base with a quick cam lock release that allows you to quickly dial in the angle of your grind. The ball and socket fitting pivots smoothly, providing a precise arc at the…

    $84.99
  12. Sure-Hook™ 360

    Sure-Hook™ 360

    …in 35mm bits.* Fits shallow 9mm deep cup holes and standard 13mm deep cup holes.* Works with standard 3/4" ID pipe - the same stuff used in pipe clamps.* Opening in hook is approximately 1-1/16" wide.* Overall length is approximately 8-5/8" in closed position.* Sold individually.* Patent Pending.

    21 Review(s)
    $5.49
  13. Mixing Mate® Paint Lid, Gallon Size - Stir, Pour, and Store!

    Mixing Mate® Paint Lid, Gallon Size - Stir, Pour, and Store!

    …Also available from Rockler, the Mixing Mate® Quart Size Paint Lid. * Pistol grip handle makes pouring paint easy and ergonomic.* Tool-free cam clamps securely anchor the Mixing Mate® Paint Lid to any standard gallon size paint canister - simply twist to secure.* Spring-loaded spout seals…

    21 Review(s)
    $19.99 $14.99

    SAVE 25%

  14. Sure-Hook™ 360, 12 Pack

    Sure-Hook™ 360, 12 Pack

    …in 35mm bits.* Fits shallow 9mm deep cup holes and standard 13mm deep cup holes.* Works with standard 3/4" ID pipe - the same stuff used in pipe clamps.* Opening in hook is approximately 1-1/16" wide.* Overall length is approximately 8-5/8" in closed position.* Sold individually.* Patent Pending.

    21 Review(s)
    $57.99
  15. Jet® 10'' Sliding Dua-Bevel Compound Miter Saw

    Jet® 10'' Sliding Dua-Bevel Compound Miter Saw

    …15-amp motor for various cutting applications* Hold-down clamp ensures an accurate cut by stabilizing the work piece* Oversized ergonomic knobs provide ease of use and maximum control* Upfront controls for safety and ease of use* Quick cam miter lock conveniently adjusts and stops at 10 detents:…

    $554.99
  16. Deluxe Band Clamp

    Deluxe Band Clamp

    …and crimped to the clamp so it won't come loose when you're really clamping tight* Permanently attached wrench will always be ready for use* Upgraded spring for clamping strength and durability* Rugged 1" W x 10' L nylon band is rated for loads up to 1,000 lbs* Self-locking cam guarantees a positive…

    5 Review(s)
    $14.99
  17. Festool Kapex Hold-Down Clamp

    Festool Kapex Hold-Down Clamp

    Replacement clamp for securing material to the deck of the Kapex miter saw. Fast-action cam design enables quick and secure material clamping for safer cutting. A non-marring plastic foot protects the material during cutting operations, and is octagonally shaped, providing secure clamping adjacent…

    $78.00
  18. Leigh Super 18'' Dovetail Jig

    Leigh Super 18'' Dovetail Jig

    …Square drive screwdriver* Cam action speed clamps* Fully illustrated User Guide* Instructional DVD* Spacer* Leigh E Bush* Half-blind bridge piece material Other features include:* Easy to use cam action clamps* Aluminum clamp bars* Non-slip material on every clamping surface* Infinitely variable…

    3 Review(s)
    $389.00
  19. Leigh D4R Pro 24" Dovetail Jig

    Leigh D4R Pro 24" Dovetail Jig

    …extruded aluminum, the redesigned jig body now has fixed integral stops to ensure joint alignment and non-marring textured clamping surfaces.* Quick-acting cams secure the work for precise machining. Built-in scales provide rapid and accurate fine adjustment for stock thickness and through-dovetail…

    10 Review(s)
    $579.00
  20. Jet® 10'' Compound Miter Saw

    Jet® 10'' Compound Miter Saw

    …a stand or work bench* Hold-down clamp tightens securely to the work piece to ensure an accurate cut* Oversized ergonomic knobs provide ease of use and maximum control* Ergonomic D-shaped over-molded handle for maximum control during cutting applications* Quick cam miter lock conveniently adjusts…

    $299.99
  21. Leigh Super 24'' Dovetail Jig

    Leigh Super 24'' Dovetail Jig

    …Square drive screwdriver* Cam action speed clamps* Fully illustrated User Guide* Instructional DVD* Spacer* Leigh E Bush* Half-blind bridge piece material Other features include:* Easy to use cam action clamps* Aluminum clamp bars* Non-slip material on every clamping surface* Infinitely variable…

    1 Review(s)
    $479.00
  22. Leigh Super 12'' Dovetail Jig

    Leigh Super 12'' Dovetail Jig

    …Square drive screwdriver* Cam action speed clamps* Fully illustrated User Guide* Instructional DVD* Spacer* Leigh E Bush* Half-blind bridge piece materialOther features include:* Easy to use cam action clamps* Aluminum clamp bars* Non-slip material on every clamping surface* Infinitely variable…

    3 Review(s)
    $269.00
  23. Mixing Mate® Paint Lid, Quart Size - Stir, Pour, and Store!

    Mixing Mate® Paint Lid, Quart Size - Stir, Pour, and Store!

    …Also available from Rockler, the Mixing Mate® Gallon Size Paint Lid. * Pistol grip handle makes pouring paint easy and ergonomic.* Tool-free cam clamps securely anchor the Mixing Mate® Paint Lid to any standard quart size paint canister - simply twist to secure.* Spring-loaded spout seals…

    7 Review(s)
    $14.99
  24. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …adjustable by simply turning a calibrated knob; the fit is recordable and repeatable.* Sliding cursor provides easy alignment.* Bolts to a board and clamps to a bench.* No dedicated router is required!* Comes with universal sub-base that attaches to virtually all plunge routers, five 5/16" guides…

    8 Review(s)
    $1049.00
  • Items 1 - 24 of 27
  • Page:
    1. 1
    2. 2
Feedback X