Carbide Drill Bits

  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
  1. Slimline Pen Hardware Kit - Satin Pearl

    Slimline Pen Hardware Kit - Satin Pearl

    …like the Swiss-made carbide writing tip make the Slimline Pen a fantastic writing choice. Turning Accessories Needed: Minimum blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately)…

    2 Review(s)
    $4.99
  2. Long Shank Carbide Forstner Bits - Standard Sizes

    Long Shank Carbide Forstner Bits - Standard Sizes

    …professional quality carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long…

    2 Review(s)
    From: $21.99
  3. Great Book of Woodworking Tips

    Great Book of Woodworking Tips

    …to common problems, including:* How to rout perfectly fitting edge joints, every time.* How to sharpen every kind of blade and bit, including carbide router bits.* How to move, store and saw 4x8 sheets all by yourself.* How to make drawer slides that really glide and never wear out.* How to…

    $24.95
  4. Long Shank Carbide Forstner Bits-Metric Sizes

    Long Shank Carbide Forstner Bits-Metric Sizes

    …professional quality carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long…

    1 Review(s)
    From: $36.99
  5. Rockler Forstner Bit Sharpening Kit

    Rockler Forstner Bit Sharpening Kit

    This economical three-piece kit will renew the cutting power of worn down forstner bits and more. Perfect for any forstner bit (including carbide-tipped and multi-spurbits), it includes a 600 grit diamond honing stone, 600 grit triangular diamond file, a CeramCut™ honing stone and complete…

    2 Review(s)
    $18.99
  6. Festool Hole Drill Set with T-Loc Systainer

    Festool Hole Drill Set with T-Loc Systainer

    …Guide plate * Centering mandrel* 2 edge stops* 2 linear stops* 2 clamps* Operating wrench* 35 mm carbide-tipped European hinge boring bit* 2 carbide-tipped 5 mm shelf pin bits (one for through holes and one for stopped pin holes). Technical Details* For use with Festool OF1010 and OF1400 Routers

    $495.00
  7. Rosette Design Carbide Cutters for Drill Press

    Rosette Design Carbide Cutters for Drill Press

    …the Rosette Design Carbide Cutter bits. They are available in four different styles to help you achieve a variety of effects around doorways and windows. They are designed especially for use with a drill press. Technical Details:* Two teeth carbide tipped cutters* For drill press only* 1/2" shank

    2 Review(s)
    From: $83.49
  8. Center Punch and Carbide Scribe

    Center Punch and Carbide Scribe

    Two-piece marking tool set works great with our templates!* Spring-actuated center punch with power adjustable head indents the wood for perfect drill bit alignment. Get perfectly straight knobs and pulls every time!* Easily adjust depth of hole.* Carbide-tipped scribe is ideal for marking out…

    $18.49
  9. 10-Piece Avenger Carbide Hole Saw Set

    10-Piece Avenger Carbide Hole Saw Set

    …some wiggle room so the drop-off piece doesn't get stuck. Carbide hole saws also make an excellent alternative to forstner bits, as unlike the latter, they can be used in a hand drill as well as in a drill press. This set of carbide hole saws includes the following sizes: 2'', 1-3/4'', 1-1/2'',…

    $169.99
  10. Drill Doctor® 750X Bit Sharpener

    Drill Doctor® 750X Bit Sharpener

    bits with one heavy-duty chuck.* With durable metal sharpening and split-point ports.* Quick-change diamond sharpening wheel. Sharpen dull and broken drill bits in less than 60 seconds, including high-speed steel, black oxide, masonry, TiN coated, cobalt, carbide, split point and custom bit angles…

    7 Review(s)
    $139.99
  11. DeWalt Hammer Drill Bit - 1/8'' x 3''

    DeWalt Hammer Drill Bit - 1/8'' x 3''

    …3" Hammer Drill Bits. Each is built to last with ROCK CARBIDE tips, an elongated flour flute helix for faster material removal, and a NO-SPIN shank. Technical Details* Longer life* Faster drilling* NO-SPIN shank* 2" drill depth with 3" overall length* ROCK CARBIDE tip for longer bit life* Elongated…

    $4.19
  12. Diamond Sharpener

    Diamond Sharpener

    …quickly sharpens carbide tools, saw blades, drill bits, knives, fish hooks and more.* Diamond surface bonded in a stainless steel alloy for long life.* With fountain pen type cover and clip. Heat-treated diamond sharpening surface quickly sharpens carbide tools, saw blades, drill bits, knives, fish…

    $9.49
  13. Summit Fancy Pen Hardware Kit - Gold

    Summit Fancy Pen Hardware Kit - Gold

    …carbide-tipped Schmidt® refill. Use the bushings, drill bit, and mandrel listed below. Turning Accessories Needed: Necessary Blank Size: 3/4" x 5" (Sold Separately) Pen Turning Mandrel (Sold Separately) Fancy Summit Bushing Set (#49156 Sold Separately) 7mm Drill Bit (#36372 Sold Separately)

    $14.99 $6.99

    SAVE 53%

  14. JET® JMD-15 Mill/Drill With R-8 Taper

    JET® JMD-15 Mill/Drill With R-8 Taper

    …Base taper allows for easier clean up* Larger hand wheel knobs* Drill press angle vise* UL Listed motor* Extra large worktable* 360° head swivel* Work lamp* Heavy-duty power downfeed with manual fine feed* 1/2'' drill chuck, chuck arbor* Draw bar* Drill chuck guard* Adjustable carbide facemill

    $1,699.00
  15. Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    Jet® JMD-18 Mill/Drill with R-8 Taper, 115/230V, Single-Phase

    …clean up* Larger hand wheel knobs* Drill press angle vise* UL Listed motor* Extra large worktable* 360° head swivel* Work lamp* Heavy-duty power downfeed with manual fine feed* 1/2'' drill chuck, chuck arbor* Draw bar* Drill chuck guard* Adjustable carbide facemill* Heavy-duty stand is available…

    $2,299.00
  16. Dewalt DCK650X Heavy-Duty XRP™ 18V Cordless 6-Tool Combo Kit

    Dewalt DCK650X Heavy-Duty XRP™ 18V Cordless 6-Tool Combo Kit

    …performance, faster application speed, and superior bit retention* DC390 18V circular saw with 6-1/2" 16-tooth carbide blade can cut 2 x 4's at a 45? angle in a single pass* DC385 18V reciprocating saw with keyless blade clamp* DW960 18V right angle drill with 310 in-lbs of max torque* DW919 18V…

    $629.00
  17. Dewalt DCK950X Heavy-Duty XRP™ 18V Cordless 9-Tool Combo Kit

    Dewalt DCK950X Heavy-Duty XRP™ 18V Cordless 9-Tool Combo Kit

    …performance, faster application speed, and superior bit retention* DC390 18V circular saw with 6-1/2" 16-tooth carbide blade can cut 2 x 4's at a 45? angle in a single pass* DC385 18V reciprocating saw with keyless blade clamp* DW960 18V right angle drill with 310 in-lbs of max torque* DW919 18V…

    $999.00
  18. Slimline Pen Hardware Kit - Gold

    Slimline Pen Hardware Kit - Gold

    …like the Swiss-made carbide writing tip make the Slimline Pen a fantastic writing choice. Turning Accessories Needed: Minimum blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately)…

    25 Review(s)
    $4.19
  19. Slimline Pen Hardware Kit - Chrome

    Slimline Pen Hardware Kit - Chrome

    …like the Swiss-made carbide writing tip make the Slimline Pen a fantastic writing choice. Turning Accessories Needed: Minimum blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately)…

    $5.99
  20. Slimline Pen Hardware Kit - Platinum

    Slimline Pen Hardware Kit - Platinum

    …like the Swiss-made carbide writing tip make the Slimline Pen a fantastic writing choice. Turning Accessories Needed: Minimum blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately)…

    $5.99
  21. Slimline Pen Hardware Kit - Satin Gold

    Slimline Pen Hardware Kit - Satin Gold

    …like the Swiss-made carbide writing tip make the Slimline Pen a fantastic writing choice. Turning Accessories Needed: Minimum blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately)…

    $4.29
  22. Slimline Pen Hardware Kit - Satin Nickel

    Slimline Pen Hardware Kit - Satin Nickel

    …like the Swiss-made carbide writing tip make the Slimline Pen a fantastic writing choice. Turning Accessories Needed: Minimum blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately)…

    $4.29
  23. Slimline Pen Hardware Kit - Black Chrome

    Slimline Pen Hardware Kit - Black Chrome

    …like the Swiss-made carbide writing tip make the Slimline Pen a fantastic writing choice. Turning Accessories Needed: Minimum blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately)…

    $4.99
  24. Slimline Pen Hardware Kit - Black Titanium

    Slimline Pen Hardware Kit - Black Titanium

    …like the Swiss-made carbide writing tip make the Slimline Pen a fantastic writing choice. Turning Accessories Needed: Minimum blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately)…

    $10.99
  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
Feedback X