Carbide Lathe Tools

  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
  1. Carbide Mini Turning Tool 3-Piece Set

    Carbide Mini Turning Tool 3-Piece Set

    Carbide cutters are not interchangeable between the different tools. * Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles. Overall length of the diamond cutter is 1-1/8". Angle of diamond cutter is approximately 35 degrees.* Square Carbide Mini Turning Tool

    6 Review(s)
    $189.99
  2. Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    Robert Sorby Handled TurnMaster Turning Tools-TurnMaster

    …nitride coated M2 HSS. How to use the TurnMaster:* Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.* This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns,…

    From: $108.99
  3. Robert Sorby TurnMaster Shanks

    Robert Sorby TurnMaster Shanks

    …nitride coated M2 HSS. How to use the TurnMaster:* Set the head in a neutral position so that the cutter is horizontal when the tool is held flat on the lathe tool rest.* This is done by loosening the locking collar with the unique wrench and rotating the collar a minimum of two and half turns,…

    From: $99.99
  4. Diamond Carbide Mini Turning Tool

    Diamond Carbide Mini Turning Tool

    …feature a molded rubber end for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Square Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set

    $69.99
  5. Round Carbide Mini Turning Tool

    Round Carbide Mini Turning Tool

    …handles feature molded rubber for a secure, effortless grip and excellent ergonomics. Also Available from Rockler:* Diamond Carbide Mini Turning Tool* Square Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set Note: carbide cutters are not interchangeable between the different tools.

    1 Review(s)
    $69.99
  6. Round Carbide Turning Tool Replacement Cutter -R1

    Round Carbide Turning Tool Replacement Cutter -R1

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Round Carbide Mini Turning Tool or the Round Carbide Pen Turning Tool (both sold separately) to get smooth finishes on concave surfaces! Technical…

    $17.99
  7. High Speed Steel Cutters for Robert Sorby TurnMaster System

    High Speed Steel Cutters for Robert Sorby TurnMaster System

    …for the finest finishingdetails on the lathe. The cutters are easily sharpened on standard sharpeningequipment. Available in a range of profiles to fit almost any turning application.Cutters for the TurnMaster system are also available in Tungsten Carbide andTitanium-Nitride coated HSS (e.g. 49356…

    $12.99
  8. Square Carbide Mini Turning Tool Replacement Cutter - S1

    Square Carbide Mini Turning Tool Replacement Cutter - S1

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Square Carbide Mini Turning Tool (sold separately) for flat or convex areas on spindles and pen turnings. Technical Details:* Ideal for giving you a…

    $17.99
  9. Diamond Carbide Turning Tool Replacement Cutter - D1

    Diamond Carbide Turning Tool Replacement Cutter - D1

    This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Diamond Carbide Mini Turning Tool or the Diamond Carbide Pen Turning Tool (both sold separately) to get smooth finishes in detailed areas, such as…

    $17.99
  10. Turning Wood with Carbide Tools, Book

    Turning Wood with Carbide Tools, Book

    …forward. Carbide-tipped turning tools are safer, faster, easier and more efficient than traditional tools, which must be ground and reground to one of dozens of nonstandard profiles. But how do woodturners get the most out of these new tools? "Turning Wood with Carbide Tools" by John English teaches…

    $21.95
  11. Square Carbide Mini Turning Tool

    Square Carbide Mini Turning Tool

    …with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics.* Note: carbide cutters are not interchangeable between the different tools. Also Available from Rockler:* Round Carbide Mini Turning Tool* Diamond Carbide Mini Turning Tool* Carbide Mini Turning Tool 3-Piece Set

    1 Review(s)
    $69.99
  12. CMT Bowl & Tray System Kit

    CMT Bowl & Tray System Kit

    Whether for vegetable trays, salad bowls or hors d'oeuvre platters, this kit lets you make gorgeous divided bowls quickly and easily. No lathe? No problem. A band saw or jig saw can handle the outer circumference. For the interior, all you need is this kit and a router. The kit includes two…

    3 Review(s)
    $112.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
Feedback X