Carving Gouge

  • Items 1 - 24 of 28
  • Page:
    1. 1
    2. 2
  1. Flexcut® Interchangeable Gouges

    Flexcut® Interchangeable Gouges

    These carving gouges feature curved cutting edges for carving hollows, rounds and sweeping curves. They are available in a range of widths and sweeps to suit a huge variety of applications. Gouges are numbered with sweeps from #1 (nearly flat) to #11 (nearly U-shaped). All are unhandled carving

    From: $12.49
  2. Flexcut® Interchangeable Micro Gouges

    Flexcut® Interchangeable Micro Gouges

    These micro carving gouges are ideal for fine detail work, and feature curved cutting edges for carving hollows, rounds and sweeping curves. They are available in a range of widths and sweeps. Lower sweep #s are flatter, while higher #s are more U-shaped. All are unhandled carving tools, and fit the…

    $15.49
  3. Flexcut® SK760 1/2'' x 60° Soft V-Tool

    Flexcut® SK760 1/2'' x 60° Soft V-Tool

    …is slightly rounded, allowing it to double as a small gouge. It can also be used as a parting tool for creating lines and textures, and it can be rolled onto its side and used as a straight chisel for flattening. This is an unhandled carving tool, and fits the Flexcut® SK100 Quick Connect Handle…

    $16.49
  4. Five Piece Power Grip Carving Set

    Five Piece Power Grip Carving Set

    …laminated steel blades, all honed and ready for immediate use! Set includes five basic tools for flat relief and figure carving. Technical Details:* 4-1/2" Handle* 1-1/8" Metal end length (1) #9 X 1/8" gouge (1) #8 X 1/4" gouge (1) 5/16" skew chisel (1) 5/16" straight chisel (1) 3/16" V parting tool

    17 Review(s)
    $46.99
  5. FlexCut® Craft Carver Beginner Carving Set

    FlexCut® Craft Carver Beginner Carving Set

    …Carver Set has everything a new carver needsto tackle a first time project. It comes with two carving blades, a V-tool, a gouge, and an interchangeable ABS handle. A basswood blank for the leaf carving project and a second blank for practicing cuts are included. There is also a leaf project DVD with…

    $29.99
  6. FlexCut 21-Piece Starter Set

    FlexCut 21-Piece Starter Set

    …the "Relief Carving in a Different Light" DVD, and the following 16 blades:* #1 Chisel (5/8")* #2 Skew (9/16")* #3 Gouge (1/4")* #3 Gouge (7/8")* #5 Gouge (1/8")* #6 Gouge (1/2")* #8 Gouge (1/4")* #8 Gouge (3/8")* #8 Gouge (11/16")* #9 Gouge (9/16")* #11 Gouge (1/16")* #11X Thumbnail Gouge (3/16")*…

    4 Review(s)
    $199.99
  7. FlexCut Slip Strop

    FlexCut Slip Strop

    The Flexcut Slip Strop compound has been specially molded to allow for polishing and debarring the hard to reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Either side of the strop can be used.

    1 Review(s)
    $14.99
  8. Flexcut® Interchangeable Spoon Gouges

    Flexcut® Interchangeable Spoon Gouges

    …spoon gouges from Flexcut feature a shank that's curved at the end, much like a deep soup spoon. The curved shank lets you reach the bottoms of recesses and other hard-to-access areas. A good application, for example, would be hollowing out the bottom of a ladle. All are unhandled carving tools,…

    From: $14.49
  9. Robert Sorby ProEdge Plus Sharpening System

    Robert Sorby ProEdge Plus Sharpening System

    …angle for turners' skew chisels.* A gouge jig in the format of a V-block to prevent pivoting when sharpening a turners' gouge. This also works as a square jig for presenting square tools at 90 degrees to the sharpening belt.* A fingernail profiler to create swept back wings on a turners' gouge.

    1 Review(s)
    $524.99
  10. Work Sharp™ WS3000 Tool Bar Attachment

    Work Sharp™ WS3000 Tool Bar Attachment

    …WS3000 Tool Bar Attachment! Designed to accept a wide range of Tormek® or Jet® sharpening jigs (Sold Separately) for turning tools and carving tools. Fits all WS3000 tools, installs quickly and doesn't interfere with other attachments or operations of the tool. Cast metal bracket and a…

    $49.99
  11. Flexcut® Hook Knives

    Flexcut® Hook Knives

    With curved blades similar to a gouge's, these knives remove stock quickly and smoothly and are great for working in hollows. The handedness (right or left) is designated by pulling the tool toward you. * Each knife is constructed with an ash handle and a high carbon steel blade. * The high carbon…

    $28.99
  12. Tormek® Sharpening System with Handtool Kit

    Tormek® Sharpening System with Handtool Kit

    …hand planer blades* The Short Tool Jig is for straight-shanked carving gouges and V-tools down to 45 mm long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 32 mm* The Axe Jig sharpens carving and carpenter's axes. It accommodates a maximum axe height of 170…

    $849.00
  13. Japanese Slip Stone-1000 Grit

    Japanese Slip Stone-1000 Grit

    The Japanese 1000 Grit Slip Stone allows you to sharpen gouges, carving tools and other curved cutting edges. Simply soak the stone in water or honing oil for 3 minutes before using. Keeping the stone wet with water while in use keeps the slip stone lubricated. Technical Details:* Measures 4" L x 2"…

    $22.59
  14. Leather Power Strop

    Leather Power Strop

    Get the edge! Use the leather power strop after stone sharpening tools to remove wire edge. Perfect for honing plane blades, draw and other knives, and carving gouges, too. Leaves cutting tools razor sharp! Fits 1/2" arbor.

    2 Review(s)
    $36.99
  15. Taunton's Complete Illustrated Guide to Sharpening

    Taunton's Complete Illustrated Guide to Sharpening

    …Among the subjects covered: * Choosing a sharpening system * Sharpening planes and saws * Touching up blades and bits * Shaping turning gouges * Honing carving tools About the author Toolmaker Thomas Lie-Nielsen brings a unique perspective to the subject of sharpening. He started making hand tools…

    $39.95
  16. Flexcut® SK725 #11 x 3/16" Thumbnail Gouge

    Flexcut® SK725 #11 x 3/16" Thumbnail Gouge

    carving tools let you save space and money by using the same handle with a wide variety of interchangeable carving blades.* Use with the Flexcut® SK100 ABS Handle for Interchangeable Carving Tools (20219, sold separately).* With the appropriate adapter, Flexcut's interchangeable carving tools…

    $15.49
  17. Universal Gouge Jig SVD-185 for Tormek T-7 Sharpening System

    Universal Gouge Jig SVD-185 for Tormek T-7 Sharpening System

    …on "V" and fingernail-shaped tools and gouges with a maximum of 1" width. Also for turning cutters. The jig comprises a tool holder which runs in a sleeve. The tool is aligned with a disc and tightened with a knob screw. There is a washer for wide gouges. The stop ring can be set for a convex bevel…

    2 Review(s)
    $97.00
  18. Profiled Leather Wheel LA-120 for Tormek T-7 Sharpening Systems

    Profiled Leather Wheel LA-120 for Tormek T-7 Sharpening Systems

    …specifically for the Tormek T-7 Sharpening System, this wheel has exchangeable leather discs so you can easily replace a disc with a worn tip. The two standard discs have a radius of 3 mm (1/8") and a 60° tip. Removes the burr and polishes the inside on turning and carving gouges and V-tools.

    1 Review(s)
    $64.00
  19. Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    Multi-Jig SVS-50 for Tormek T-7 Sharpening System

    …straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width. Technical Details:* For turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges Best Used With: Tormek T-7 Sharpening System. Click Here to View…

    $68.00
  20. Handtool Kit for Tormek Sharpening Systems HTK-705

    Handtool Kit for Tormek Sharpening Systems HTK-705

    …hand planer blades.* The Short Tool Jig is for straight-shanked carving gouges and V-tools down to 45 mm long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 32 mm.* The Axe Jig sharpens carving and carpenter's axes. It accommodates a maximum axe height of 170…

    1 Review(s)
    $215.00
  21. Oneway Wolverine Grinding Jig

    Oneway Wolverine Grinding Jig

    …ratchet handles. Quickly and easily sharpen your gouges, chisels, scrapers, parting tools, skews and carving tools. * Designed to sharpen traditional bowl gouges and other curved chisels with straight edges such as roughing and spindle gouges.* Can be used with most shop grinders.* Oneway recommends…

    $104.99
  22. Tormek® Ultimate Bundle

    Tormek® Ultimate Bundle

    …The Planer/Joiner Blade Jig sharpens HSS blades of any size, while the Woodturner's Accessory Kit includes a Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T)…

    $1,315.00
  23. Tormek® Magnum Bundle

    Tormek® Magnum Bundle

    …to 1000 grit and flip it over to return the wheel to coarse grinding. The Woodturner's Accessory Kit includes a Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with…

    $1,149.00
  24. Work Sharp WS2000 Tool Sharpener

    Work Sharp WS2000 Tool Sharpener

    …slotted wheels, which allow you to see the cutting edge while you sharpen. This feature is perfect for tools with curved edges, like carving knives and gouges. Also makes a great low speed multi-purpose shop grinder. Uses common 150mm adhesive-backed abrasives in multiple grits. 1750 RPM wheel…

    18 Review(s)
    $79.99
  • Items 1 - 24 of 28
  • Page:
    1. 1
    2. 2
Feedback X