Center Locator

  • Items 1 - 24 of 53
  • Page:
    1. 1
    2. 2
    3. 3
  1. Stock Center Finder

    Stock Center Finder

    Works quickly and accurately to locate the center of stock for turning on a lathe or other purposes. No need for special calculations. This easy-to-use finder has no moving parts, so your measurements will be simple and consistent. Technical Details* Transparent yellow tinted plastic* Maximum 8"…

    6 Review(s)
    $9.79
  2. Dowel Centers-Individual Sizes

    Dowel Centers-Individual Sizes

    centers allow you to precisely transfer the location of one set of dowel holes to the corresponding holes in the other half of a doweled joint. Just drill one set of holes, slip in the dowel centers and press the joint together. The pins on the dowel centers will precisely mark the hole locations on…

    10 Review(s)
    $6.99
  3. 3' Steel Center Square

    3' Steel Center Square

    Quickly and easily locate the center of round and square stock up to 6" in diameter.* The 3mm thick beveled blade is made from spring steel and is hardened and ground for extended life.* Solid steel right angle stock is 3/8" thick.* Comes in a convenient snap-close vinyl storage case.

    8 Review(s)
    $24.99
  4. Case for Pro Shelf Drilling Jig Drill Bits and Index Pins

    Case for Pro Shelf Drilling Jig Drill Bits and Index Pins

    A handy blow-molded case for keeping all your self-centering drill bits and index pins together. Includes locations for 5mm, 7/32", 1/4" and 9/32" self-centering drill bits, and for eight index pins for the Rockler Pro Shelf Drilling Jig.

    $9.99
  5. Domino Self-Centering Guide

    Domino Self-Centering Guide

    …without tools or measuring* A steel coupling cable keeps the two stops always centered around the Domino mortise location* Infinitely adjustable from 3/4" apart (3/8" from center) up to 5-1/4" apart (2-5/8" from center)* Stops are movable using a sliding dovetail arrangement* When clamped in…

    $129.00
  6. AAA+ Home Smart Center

    AAA+ Home Smart Center

    …phone* Calls up to 5 numbers when alarm is triggered and allows you to arm and disarm the system from any location* Manufacturer: Skylink Technologies The heart of the AAA+ Home Smart Center is its control panel, which can be placed on a desk or wall mounted. You'll use the control panel to program…

    $174.99
  7. Dowel Centers Set

    Dowel Centers Set

    Dowel centers allow you to precisely transfer the location of one set of dowel holes to the corresponding locations in the other half of a doweled joint. Just drill one set of holes, slip in the dowel centers and press the joint together. The pins on the dowel centers will precisely mark the hole…

    10 Review(s)
    $7.99
  8. Center-point Tape Measure-Select Option

    Center-point Tape Measure-Select Option

    Now you no longer need to compute fractional formulas with this unique dual scale tape. In addition to the standard markings, it automatically locates the center of your work.

    5 Review(s)
    From: $16.99
  9. iGaging 6'' Precision Combo Square

    iGaging 6'' Precision Combo Square

    …perfect for precise measuring, layout and machine setups. Just slide the ruler to the end for a precision height gauge. The included center head easily locates the center of round stock, while the 45° miter face, bubble level and scratch awl ensure easy, accurate layout lines. Features 1/8" and…

    5 Review(s)
    $39.99
  10. Concealed Hinge JIG IT® System

    Concealed Hinge JIG IT® System

    Drill concealed hinge cup holes with ease and accuracy using the Concealed Hinge JIG IT® System! Use it to easily locate center, and drill cup holes on cabinet doors for fully concealed hinges. Use our Mounting Plate JIG IT® templates (sold separately) to accurately align holes for hinge…

    26 Review(s)
    $41.99
  11. Minifix JIG IT® Template

    Minifix JIG IT® Template

    Marking and drilling guide for Minifix fasteners.* An easy-to-use marking and drilling guide for fasteners.* Mark location of cam holes with a center punch Includes drill guide bushing for drilling 8mm horizontal hole.* Includes clamp and drill guide.

    8 Review(s)
    $41.99
  12. JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    …eliminate hinge space variations from door to door with our innovative JIG IT® Multi-Tool Rail Master Pack. It lets you quickly and easily locate, center and drill two (or more) cup holes on cabinet doors for fully concealed European-style hinges – with a single setup! The Master Pack…

    14 Review(s)
    $93.99
  13. 16'' Woodworker's Ruler

    16'' Woodworker's Ruler

    …The clear acrylic material makes lining up the graduations with the layout lines fast and accurate, and it's ideal for finding centers in drawer fronts when locating pulls and knobs. Nearly 1/4" thick, its rigidity and the tapered edges yield straight, true lines. The 0 marks are set in from the…

    2 Review(s)
    $12.99
  14. Traditional Steel Clipboard Clip, Nickel Finish

    Traditional Steel Clipboard Clip, Nickel Finish

    …easy-to-install clip used for easels or common clipboards. Technical Details:* 6" wide* Nickel plated steel* Heavy springs help keep paper securely under clip* Large 1/2" diameter hole in center of clip bar for hanging clipboard in convenient location* Supplied with two #5 x 1/2" round head screws

    3 Review(s)
    $3.79
  15. INCRA Precision Specialty Rules 6'' x 3'' X-Y Marker

    INCRA Precision Specialty Rules 6'' x 3'' X-Y Marker

    The new INCRA Precision Specialty Rules 6" x 3" X-Y Marker measures from both edges of a corner in one operation! Locate drill centers fast and accurately for positioning and installing cabinet door knobs and handles, installing casters on furniture, or marking flute lines. One or both t-bars can be…

    $31.99
  16. Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-18" Diameter

    Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-18" Diameter

    …over the center shaft and start the screw into the hole in the center shaft. * Insert the upper shaft assembly all the way into the center shaft. * Set the shaft assembly on the bottom pivot and extend the upper shaft to the top of the cabinet. Plumb with level to locate the center for the top…

    From: $51.49
  17. Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-24" Diameter

    Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-24" Diameter

    …over the center shaft and start the screw into the hole in the center shaft. * Insert the upper shaft assembly all the way into the center shaft. * Set the shaft assembly on the bottom pivot and extend the upper shaft to the top of the cabinet. Plumb with level to locate the center for the top…

    $64.49
  18. Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-28" Diameter

    Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-28" Diameter

    …over the center shaft and start the screw into the hole in the center shaft. * Insert the upper shaft assembly all the way into the center shaft. * Set the shaft assembly on the bottom pivot and extend the upper shaft to the top of the cabinet. Plumb with level to locate the center for the top…

    $77.99
  19. Glass Door Locks

    Glass Door Locks

    Easy-to-install lock slips on edge of glass door at any location — no boring required! Then simply tighten set screw for safe, secure fit. Choose from single glass door deadbolt lock and double glass door deadbolt lock. Fits glass 1/4" - 5/16" thick. * Single glass door deadbolt lock mounts…

    3 Review(s)
    From: $19.49
  20. Marking Tool for In-Line Button-Fix Panel Couplers

    Marking Tool for In-Line Button-Fix Panel Couplers

    …Simply clip the marking tools into the installed sockets, position your panel, and press down. Much like dowel centers, the marking tools will leave neat indentations in the exact locations where a button will need to be installed. Marking Tools are sold singly — how many you need will depend…

    $4.99
  21. Marking Tool for Right Angle Button-Fix Panel Couplers

    Marking Tool for Right Angle Button-Fix Panel Couplers

    …double holes on the sockets, the sockets onto the buttons, position your panel, and press down. Much like dowel centers, the marking tools will leave neat indentations in the exact locations where a button will need to be installed. Marking Tools are sold singly - how many you need will depend on…

    $4.99
  22. Minifix (KD) Fittings-Minifix Fittings

    Minifix (KD) Fittings-Minifix Fittings

    …in Brown or White* Minifix JIG IT Template An easy to use marking and drilling guide for 3/4" Minifix fasteners (#22161 only). Mark location of cam holes with a center punch. Includes drill guide bushing for drilling 8mm horizontal hole. Includes clamp and drill guide. Drill bits and Stop Collars…

    14 Review(s)
    $7.39
  23. BIC Muro Ceiling Speakers with Swivel Tweeter

    BIC Muro Ceiling Speakers with Swivel Tweeter

    …excellent sound quality even in less acoustically desirable locations with these BIC speakers! These great-sounding in-ceiling speakers have a unique feature: the tweeter can be manually swivelled to point a few degrees off center. Since the higher frequencies produced by the tweeter are highly…

    $123.59
  24. Blum® Inserta Hinges, Inset

    Blum® Inserta Hinges, Inset

    …Blum Inserta Hinges. Discover how easy it is to install these hinges on-site yourself. Just snap the cap down to expand both gripper arms in the center hole for a firm connection. Cover is pushed closed with fingertip pressure.* Recommended for face frame cabinet applications* Featuring self-close…

    1 Review(s)
    $19.99
  • Items 1 - 24 of 53
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X