Centering Tool

  • Items 1 - 24 of 237
  • Page:
    1. 1
    2. 2
    3. 3
  1. Stock Center Finder

    Stock Center Finder

    Works quickly and accurately to locate the center of stock for turning on a lathe or other purposes. No need for special calculations. This easy-to-use finder has no moving parts, so your measurements will be simple and consistent. Technical Details* Transparent yellow tinted plastic* Maximum 8"…

    6 Review(s)
    $9.79
  2. Marking Tool for In-Line Button-Fix Panel Couplers

    Marking Tool for In-Line Button-Fix Panel Couplers

    …tape measure. Simply clip the marking tools into the installed sockets, position your panel, and press down. Much like dowel centers, the marking tools will leave neat indentations in the exact locations where a button will need to be installed. Marking Tools are sold singly — how many you…

    $4.99
  3. Rockler Insty-Drive 18 Piece Self-Centering & Countersink Set

    Rockler Insty-Drive 18 Piece Self-Centering & Countersink Set

    18-piece Rockler/Insty-Drive self-centering and countersink set lets you convert from drilling and countersinking to installing perfectly centered hinge screws in a matter of seconds - without re-chucking any bits! The 18-Piece set includes #6, #8 and #10 HSS 2-flute tapered hex shank bits with…

    32 Review(s)
    $78.99 $49.99

    SAVE 37%

  4. Mortise Centering Router Base

    Mortise Centering Router Base

    Simply straddle the board between the pins and cut your mortise - perfectly centered every time!* Plate is constructed of 1/4" Acrylic with 1-1/2" opening, and is transparent for visibility.* Solid brass guides thread easily into 3 different insert settings for a variety of wood thicknesses and for…

    10 Review(s)
    $19.99
  5. 12'' Centerpoint Rule

    12'' Centerpoint Rule

    Targets the exact center every time. Find dead-center on your project by simply matching numbers. Just measure the end points (say, 7 3/8" ), then find the corresponding number (7 3/8" ) on the lower scale. Made of durable tempered stainless steel with etched, black-filled numbers in standard…

    6 Review(s)
    $13.99
  6. JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    …hinge space variations from door to door with our innovative JIG IT® Multi-Tool Rail Master Pack. It lets you quickly and easily locate, center and drill two (or more) cup holes on cabinet doors for fully concealed European-style hinges – with a single setup! The Master Pack includes…

    14 Review(s)
    $93.99
  7. 1" and 2" Microplane® Rotary Shapers

    1" and 2" Microplane® Rotary Shapers

    …non-metallic materials.* Includes drum and steel blade.* Replacement blades sold separately.* Materials being fed into the shaper should be fed left of center to reduce kickback.* Always wear safety goggles and gloves.* Not for use with routers. Technical Details:* Drill attachments measure 3-1/2"…

    7 Review(s)
    From: $17.99
  8. Caliper Gauge/Center Finder

    Caliper Gauge/Center Finder

    Quickly set calipers to any 1/8" increment between 0 and 5". The center of the gauge features a vertical line for finding center on round or square stock. Gauge is made of durable black plastic and features easy-to-find white measurement markings. Patent Pending.

    3 Review(s)
    $7.99 $5.99

    SAVE 25%

  9. Nova 10-in-1 Chuck Gauge

    Nova 10-in-1 Chuck Gauge

    This tool combines all of the turner's most commonly used gauges into one efficient device. It includes a dovetail gauge, diameter gauge, center finder, dowel gauge, angle checker, dovetail marking tool, ruler, protractor and faceplate marking tool. With over 10 functions, you'll work faster and…

    $13.99
  10. E-Z Pro Mortise and Tenon Jig

    E-Z Pro Mortise and Tenon Jig

    …quickly on the ends of both pieces of stock, allowing you to cut the mortise and tenon using the same setup for a perfect fit in every joint. Set the center wall for your stock's thickness, align it with the jig, and set the mortise and tenon exactly where you want it. Use your plunge router to cut…

    6 Review(s)
    $159.99
  11. Center-point Tape Measure-Select Option

    Center-point Tape Measure-Select Option

    Now you no longer need to compute fractional formulas with this unique dual scale tape. In addition to the standard markings, it automatically locates the center of your work.

    5 Review(s)
    From: $16.99
  12. Big Gator V-Drill Guide - Standard

    Big Gator V-Drill Guide - Standard

    …stock, flat stock, and even directly into corners-all with just a hand drill. The precisely milled V-groove in the bottom of the drill guide centers the holes on pipes, dowels, and outside corners, while the flats allow 90° drilling into flat surfaces-just clamp and drill. 17 standard imperial…

    2 Review(s)
    $24.99
  13. Router Guide Bushing Kit

    Router Guide Bushing Kit

    …work. Fits any base with a 1-3/16" diameter center hole. Also available from Rockler, the Guide Bushing Router Plate (sold separately). Affordably priced and designed with maximum utility in mind, this router plate features a 1-1/4" center opening to accept guide bushings and a ring of…

    45 Review(s)
    $41.99
  14. 3' Steel Center Square

    3' Steel Center Square

    Quickly and easily locate the center of round and square stock up to 6" in diameter.* The 3mm thick beveled blade is made from spring steel and is hardened and ground for extended life.* Solid steel right angle stock is 3/8" thick.* Comes in a convenient snap-close vinyl storage case.

    8 Review(s)
    $24.99
  15. INCRA Precision Centering Rule

    INCRA Precision Centering Rule

    Find the exact center of any workpiece up to 12" wide. Has a built-in protractor, too.

    2 Review(s)
    $31.99
  16. Domino Self-Centering Guide

    Domino Self-Centering Guide

    …positions that can be easily changed without tools or measuring* A steel coupling cable keeps the two stops always centered around the Domino mortise location* Infinitely adjustable from 3/4" apart (3/8" from center) up to 5-1/4" apart (2-5/8" from center)* Stops are movable using a sliding dovetail…

    $129.00
  17. Dow'l Simp'l Kit

    Dow'l Simp'l Kit

    …you to easily make three types of joints: right angle, edge to edge and edge to surface. Simple to use, the Dow'l Simp'l Kit assists you in centering and aligning dowels on stock that is nominally 5/8", 3/4" and 1" thick. * No adjustments necessary to accommodate stock of different thicknesses.…

    1 Review(s)
    $48.29
  18. Center Punch and Carbide Scribe

    Center Punch and Carbide Scribe

    Two-piece marking tool set works great with our templates!* Spring-actuated center punch with power adjustable head indents the wood for perfect drill bit alignment. Get perfectly straight knobs and pulls every time!* Easily adjust depth of hole.* Carbide-tipped scribe is ideal for marking out…

    $18.49
  19. Rockler Measuring Kit

    Rockler Measuring Kit

    This complete Rockler Measuring Kit includes three tools to help make all yourmeasuring and assembly tasks quicker and easier!* Square Check* EZ-Mark Line Cords* Biscuit Cutter Gauge Square Check Features:* Prevents your tape measure from slipping off the corner while measuring diagonals* 90°…

    $19.97 $10.99

    SAVE 45%

  20. Dowel Centers Set

    Dowel Centers Set

    Dowel centers allow you to precisely transfer the location of one set of dowel holes to the corresponding locations in the other half of a doweled joint. Just drill one set of holes, slip in the dowel centers and press the joint together. The pins on the dowel centers will precisely mark the hole…

    10 Review(s)
    $7.99
  21. Self Centering Doweling Jig for Thick Timbers

    Self Centering Doweling Jig for Thick Timbers

    Great for large jobs such as swing sets and outdoor structures! Opens to a full 6" . Precisely aligned guides for five permanent holes including 1/4" , 5/16" , 3/8" , 7/16" , and 1/2".

    14 Review(s)
    $83.99
  22. Rockler Insty-Drive Self-Centering Bits

    Rockler Insty-Drive Self-Centering Bits

    Self-centering bits feature a hex collar that allows for use with the Rockler/Insty-Drive exclusive Insty-Driver. You'll get perfectly centered pilot holes for accurate hinge and hardware installation every time!

    65 Review(s)
    From: $12.99
  23. Self-Centering Bits

    Self-Centering Bits

    Designed for Rockler Woodworking and Hardware. These bits offer dead-on centering accuracy. Use with our JIG-IT Templates for Shelf Pins or Cribbage Templates for perfect results every time. Shelf Jig & 1/4" bit set for 1/4" shelf pins Shelf Jig & 5mm bit set for 5mm shelf pins Shelf Jig…

    18 Review(s)
    $16.49
  24. Festool Domino® Trim Stop for DF500/DF700 Joiners

    Festool Domino® Trim Stop for DF500/DF700 Joiners

    …between 7/8" and 2-3/4" (22 mmand 70 mm) in width, the sides adjust independently for centered or off-centermortising. Attaches quickly and easily to both models of the Festool DominoJoiner - no need for any tools. Technical Details:* The Trim Stop is intended for use with the Festool Domino®…

    $65.00
  • Items 1 - 24 of 237
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X